Dometic MasterFlush MF 7260 Bruksanvisning

Dometic toalett MasterFlush MF 7260

Läs nedan 📖 manual på svenska för Dometic MasterFlush MF 7260 (2 sidor) i kategorin toalett. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

SEACOCK

0.75 in./19 mm

ID HOSE

(SEAWATER

SUPPLY)

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

SEACOCK

MACERATOR

TOILET

MAKE LOOP 12 in./30 cm ABOVE FLOOR TO

RETAIN WATER IN BOWL

FROM

FRESH

WATER

SUPPLY

5.1 Above water line system layouts

SPECIAL APPENDIX - SUPERCEDES TOILET SYSTEM LAYOUTS IN

SECTION 5 OF INSTALLATION MANUAL

(FRESHWATER

SUPPLY)

CHECK VALVE

ENSURES

THAT PUMP

STAYS PRIMED

0.5 in./

13 mm ID

FRESH

WATER

LINE

5Toilet with direct overboard

discharge

SEACOCK

DECK

DISCHARGE

HOLDING TANK

(cut-away view)

DISCHARGE

PUMP

OPTIONAL

FULL TANK

LEVEL FLOAT

ADD VENTED LOOP

IF HOLDING TANK IS

BELOW WATER LINE

VENT

FILTER

VENT

FITTING

0.75 in./19 mm

ID HOSE

(SEAWATER

SUPPLY)

SEACOCK

MACERATOR

TOILET

MAKE LOOP 12 in./30 cm ABOVE FLOOR TO

RETAIN WATER IN BOWL

FROM

FRESH

WATER

SUPPLY

(FRESHWATER

SUPPLY)

CHECK VALVE

ENSURES

THAT PUMP

STAYS PRIMED

0.5 in./

13 mm ID

FRESH

WATER

LINE

6Toilet with holding tank

discharge

IMPORTANT:

1. TOILET BOWL RIM MUST BE MINIMUM 8” (20 cm)

ABOVE HIGHEST POSSIBLE WATER LINE AT FULL

HEEL.

2. VENTED LOOPS MUST BE MINIMUM 8” (20 cm)

ABOVE HIGHEST POSSIBLE WATER LINE AT FULL

HEEL. FOR OPTIMUM TOILET OPERATION, INSTALL

VENTED LOOP AS CLOSE TO 8” (20 cm) HEIGHT AS

POSSIBLE.

3. PLACE VENTED LOOPS NEAR CENTER OF BOAT TO

MINIMIZE FLUCTUATION OF WATER LINE HEIGHT.

4. MAXIMUM SEAWATER PUMP LIFT IS 4 FT. (1.2 m).

5. MAXIMUM DISCHARGE HEAD IS 4 FT. (1.2 m).

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

8 in./20 cm MINIMUM

(MAX HEEL)

WATERLINE RANGE

(STATIC)

5.2 Below water line system layouts

Toilet with direct overboard

discharge

Toilet with holding tank

discharge

0.75 in./19 mm

ID HOSE

MACERATOR

TOILET

0.75 in./19 mm

VENTED LOOP

WITH CHECK

VALVE

(SEAWATER

SUPPLY)

1 in./25 mm OR

1.5 in./38 mm

VENTED LOOP

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

SEACOCK

VENT

FITTING

VENT

FITTING

(FRESHWATER

SUPPLY)

SEACOCK

0.5 in./13 mm ID

FRESH WATER

LINE

0.5 in./13 mm ID

FRESH WATER

LINE

8 in./20 cm MINIMUM

(MAX HEEL)

WATERLINE RANGE

(STATIC)

0.75 in./19 mm

ID HOSE

MACERATOR

TOILET

0.75 in./19 mm

VENTED LOOP

WITH CHECK

VALVE

(SEAWATER

SUPPLY)

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

VENT

FITTING

VENT

FITTING

SEACOCK

(FRESHWATER

SUPPLY)

DECK

DISCHARGE

HOLDING TANK

(cut-away view)

DISCHARGE

PUMP

OPTIONAL

FULL TANK

LEVEL FLOAT

ADD VENTED LOOP

IF HOLDING TANK IS

BELOW WATERLINE

VENT

FILTER

VENT

FITTING

SEACOCK

IMPORTANT:

1. 0.75” VENTED LOOP MUST USE EIT HER A DUCKBILL

VALVE OR ELECTRIC NORMALLY-OPEN SOLENOID

VALVE.

2. VENTED LOOPS MUST BE MINIMUM 8” (20 cm)

ABOVE HIGHEST POSSIBLE WATER LINE AT FULL

HEEL. FOR OPTIMUM TOILET OPERATION, INSTALL

VENTED LOOP AS CLOSE TO 8” (20 cm) HEIGHT AS

POSSIBLE.

3. VENTED LOOPS SHOULD NOT EXCEED MAXIMUM

24” (50 cm) ABOVE WATER LINE.

4. PLACE VENTED LOOPS NEAR CENTER OF BOAT TO

MINIMIZE FLUCTUATION OF WATER LINE HEIGHT.

5. MAXIMUM SEAWATER PUMP LIFT IS 4 FT. (1.2 m).

6. MAXIMUM DISCHARGE HEAD IS 4 FT. (1.2 m).

REVISION A

Form No. 600347192 9/17

Produktspecifikationer

Varumärke:	Dometic
Kategori:	toalett
Modell:	MasterFlush MF 7260
Färg på produkten:	Zwart
Vikt:	373 g
LED-indikatorer:	Ja
Frekvensband:	2.4 - 2.4835 GHz
Antal Ethernet LAN (RJ-45)-portar:	1
Nätförsörjning:	3.84 W
Ethernet LAN, dataöverföringshastigheter:	10, 100 Mbit/s
Kabelteknik:	10/100Base-T(X)
Nätverksstandard:	IEEE 802.3af, IEEE 802.3at
Antenner kvantitet:	1
Power over Ethernet (PoE):	Ja
Mått (B x D x H):	100 x 37 x 163 mm
Full duplex:	Ja
Värmeavledning:	7 BTU/h
Drifttemperatur (TT):	5 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent