Dremel 1800 Bruksanvisning
Läs nedan 📖 manual på svenska för Dremel 1800 (76 sidor) i kategorin Elektrisk geringssåg. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/76
Owner’s Manual
MODEL 1800
VARIABLE SPEED
18” Scroll Station
Form No. 2610922039 0504
4915 21st Street
Racine, WI 53406
1-800-437-3635
http://www.dremel.com
General Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Specific Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 5
Additional Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Motor Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Connection to a Power Source . . . . . . . . . . . . . . . . . . . . .7
Unpacking & Checking Contents . . . . . . . . . . . . . . . . . . . . .8
Getting to Know Your Scroll Station . . . . . . . . . . . . . . .9 - 10
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Installing the Disc Table . . . . . . . . . . . . . . . . . . . . . . . . .11
Installing the Flex Shaft (optional accessory) . . . . . . . .11
Mounting the Scroll Station to a Bench . . . . . . . . . . . . .12
Mounting the Scroll Station to Plywood . . . . . . . . . . . . .13
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Basic Scroll Station Operations . . . . . . . . . . . . . . . . . . .14
Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Removing and Installing Pin-End Blades . . . . . . . . . . . .14
Removing and Installing Plain-End Blades . . . . . . . . . .15
Blade Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Making Interior Scroll Cuts . . . . . . . . . . . . . . . . . . . . . . .16
Adjusting the Table for Horizontal or Bevel Cutting . . . .16
Operating Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Aligning the Degree Scale Pointer . . . . . . . . . . . . . . . . .17
Removing and Installing Abrasive Discs . . . . . . . . . . . .17
Power ON/OFF Switch . . . . . . . . . . . . . . . . . . . . . . . . . .17
Adjusting the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Adjusting the Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Variable Speed Control . . . . . . . . . . . . . . . . . . . . . . . . . .18
Adjusting Side Table . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Squaring Side Table . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Maintaining Your Scroll Station . . . . . . . . . . . . . . . . . . . . . .19
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Carbon Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Recommended Accessories . . . . . . . . . . . . . . . . . . . . . . . .21
Dremel Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .22
Manual Contents
Parlez-vous français? Voir page 23
¿Habla español? Ver página 50
REMOVE ADJUSTING KEYS AND WRENCHES
Form the habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
AVOID ACCIDENTAL STARTING
Make sure the switch is in the “OFF” position before plugging
in tool.
GROUND ALL TOOLS
This tool is equipped with an approved 3-conductor cord and
a 3 prong grounding type plug to fit the proper grounding type
receptacle. The green conductor in the cord is the grounding
wire. Never connect the green wire to a live terminal.
NEVER STAND ON TOOL OR ITS STAND
Serious injury could occur if the tool is tipped or if the cutting
tool is accidentally contacted. Do not store materials on or
near the tool such that it is necessary to stand on the tool or
its stand to reach them.
CHECK DAMAGED PARTS
Before further use of the tool, a guard or other part that is
damaged should be carefully checked to ensure that it will
operate properly and perform its intended function. Check for
alignment of moving parts, mounting, and any other condi-
tions that may affect its operation. A guard or other part that
is damaged should be properly replaced.
All repairs, electrical or mechanical, should be
attempted only by trained repairmen. Contact
the nearest Dremel Service Center, Authorized Dremel
Service Station.
Use only Dremel replacement parts; any oth-
ers may create a hazard.
The use of any other accessories not speci-
fied in the current Dremel catalog, may create
a hazard.
Some dust created by power sanding, sawing,
grinding, drilling, and other construction activ-
ities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chem -
icals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other mason -
ry products, and
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
2
General Safety Rules
READ ALL INSTRUCTIONS! Failure to follow the safety rules listed below and other basic safety precautions
may result in serious personal injury .
WARNING
!
SAVE THESE INSTRUCTIONS
WARNING
!
WARNING
!
WARNING
!
WARNING
!
Work Area
KEEP CHILDREN AWAY
Do not let visitors contact tool or extension cord. All visitors
should be kept away from work area.
KEEP WORK AREAS CLEAN
Cluttered areas and benches invite accidents.
MAKE WORKSHOP CHILD-PROOF
Use padlocks, master switches.
AVOID DANGEROUS ENVIRONMENTS
Don’t use power tools in damp or wet locations. Keep work
area well lit. Do not expose power tools to rain. Do not use
the tool in the presence of flammable liquids or gases.
Personal Safety
KNOW YOUR POWER TOOL
Read and understand the owner’s manual and labels affixed
to the tool. Learn its application and limitations as well as the
specific potential hazards peculiar to this tool.
DON’T OVERREACH
Keep proper footing and balance at all times.
STAY ALERT
Watch what you are doing. Use common sense. Do not oper-
ate tool when you are tired. Do not operate while under med-
ication or while using alcohol or other drugs.
DRESS PROPERLY
Do not wear loose clothing or jewelry. They can be caught in
moving parts. Rubber gloves and non-skid footwear are rec-
ommended when working outdoors. Wear protective hair cov-
ering to contain long hair.
USE SAFETY GLASSES
Also wear face or dust mask if cutting operation is dusty, and
ear plugs during extended periods of operation.
Everyday eyeglasses have only impact resistant lenses, they
are NOT safety glasses.
GUARD AGAINST ELECTRIC SHOCK
Prevent body contact with grounded surfaces. For example:
pipes, radiators, ranges, refrigerator enclosures.
DISCONNECT TOOLS FROM POWER SOURCE
When not in use, before servicing, when changing blades,
bits, cutters, etc.
KEEP GUARDS IN PLACE
In working order, and in proper adjustment and alignment.
3
Specific Safety Rules
Scroll Station Station
Always disconnect the power cord from the power
source before making any adjustments or attaching any
accessories. Always turn off saw before disconnecting it
to avoid accidental starting when reconnecting to a
power source. You may unexpectedly cause the tool to start
leading to serious personal injury.
Never leave tool running unattended. Turn power off.
Don't leave tool until it comes to a complete stop.
Never leave the switches in "ON" position. Before plug-
ging the tool in, check that the switches are "OFF".
Accidental start-ups could cause injury.
Do not use tool if switch does not turn it on and off. Have
broken switches replaced by an authorized service center.
Use only Dremel Scroll Station blades. Use the right blade
size, style and cutting speed for the material and the type of
cut. Sharp blades minimize stalling and kickbacks. Blade
teeth should point down toward the table.
Avoid awkward operations and hand positions and
always make sure you have good balance. A sudden slip
could cause your hand to move into the blade.
Firmly clamp or bolt your saw station to a stable, level
workbench or table. The most comfortable table height is
approximately waist height.
Never stand on tool. Serious injury could occur if the tool is
tipped or if the blade is unintentionally contacted.
Before making a cut, be sure all adjustments are secure.
Loose table or guards could shift in use and cause you to
loose control of the workpiece.
Always adjust drop foot to just clear the workpiece.
Proper adjustment of the drop foot will help protect your fin -
gers and keep blade breakage to a minimum.
Always support large workpieces while cutting to mini-
mize risk of blade pinching and kickback. Heavy work-
piece may cause the table to slip, walk or slide while cutting.
Be sure the blade path is free of nails. Inspect for and
remove nails from lumber or workpiece before cutting or
sanding.
Keep hands away from cutting area. Do not hand hold
pieces so small that your fingers go under the blade guard.
Do not reach underneath work or in blade cutting path with
your hands and fingers for any reason.
Never start the tool when the blade is in contact with the
workpiece. Allow the motor to come up to full speed
before starting a cut. Blade in contact with the workpiece
on start up will cause it to jump.
Observe and follow correct direction of feed and do not
feed the material too quickly. Hold the work firmly
against the table. Feed work into a blade against the teeth
of the blade. Feeding material too forcefully may cause blade
to snap.
Use caution when cutting materials with an irregular
cross-section or rounds like dowel rods. If possible lay
the material on its "flat" side when cutting. For round
stock use a "Vee" block to support the material. Wavy
material like molding will tend to rock and may bind while cut-
ting. Rounds will tend to roll while being cut and the blade
may "bite" and grab it from your control.
Do not remove jammed cutoff pieces until blade has
stopped. Never touch blade or other moving parts dur-
ing use. Contacting the blade or other moving mechanism
may cause injury.
Power Take Off Safety Rules
The use of attachments and accessories not recom-
mended by Dremel may result in risk of injuries.
Remove the Scroll Station blade and replace it with the
Scroll Station blank in the blade holder before operating
any attachment from the power take off. Avoid the pos-
sibility of contacting the reciprocating blade while sand-
ing. Inadvertent contact with a blade could cause serious
lacerations.
Unplug the tool before changing accessories or attach-
ments. Accidental start-ups may occur if sander is plugged
in while changing an accessory.
Keep the cord to the side away from sanding pad or other
attachments. The cord can be dragged into housing and
become entangled with the pad or other moving components.
Disc Sander Safety Rules
Use only 5" diameter adhesive backed sandpaper discs.
Do not use sandpaper intended for larger sanding pads.
Larger sandpaper will extend beyond the sanding pad caus-
ing snagging, tearing of the paper or kickback.
Make sure the sandpaper disc is not torn or loose before
turning tool on. The disc could fly away unexpectedly.
Properly adjust sanding disc to avoid it overhanging the
pad. Spinning sanding disc overhanging its pad can cause
severe lacerations.
Always position your workpiece on the downward side of
the direction of rotation arrow while sanding. Hold the
work firmly against the table. Sanding on the upward side of
the rotation could cause the workpiece to lift up or kickback.
Refer to rotation arrow on your sander guard.
Avoid awkward hand positions while sanding. A sudden
slip could cause a hand to move into abrasive disc.
Produktspecifikationer
| Varumärke: | Dremel |
| Kategori: | Elektrisk geringssåg |
| Modell: | 1800 |
Behöver du hjälp?
Om du behöver hjälp med Dremel 1800 ställ en fråga nedan och andra användare kommer att svara dig
Elektrisk geringssåg Dremel Manualer
4 Augusti 2024
Elektrisk geringssåg Manualer
Nyaste Elektrisk geringssåg Manualer
21 Juli 2024
20 Juli 2024
20 Juli 2024
19 Juli 2024
17 Juli 2024
17 Juli 2024
17 Juli 2024
17 Juli 2024