Eberspacher Mini-Clock Bruksanvisning
Eberspacher
Uppvärmning
Mini-Clock
Läs nedan 📖 manual på svenska för Eberspacher Mini-Clock (1 sidor) i kategorin Uppvärmning. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
Operating / Installation Instructions
Mini-Clock
D
S
GB
F
1
2
3
ON
20:05
1
2
3
8
5
6
7
4
General remarks
Setting and operating the Mini-Clock
• If a key is not depressed within 15 seconds, the display will return
to its initial state – Current time.
• When setting the time with the keys 2 or 3, the setting speed is
accelerated when the key is kept depressed.
• Up to three preset times can be set and activated on this Mini-
Clock. Each preset time is deactivated after the heating period,
and it must be newly activated for each new heating period – see
activate / deactivate the preset time.
Setting functions on the Mini-Clock
Setting-up for the first time:
After connection to the power supply all symbols on the display will
start to flash. The heater cannot be turned on in this state. The
current time has to be set first.
Press key 1: The clock time flashes. Set the time with key 2 or 3.
Press key 1: The time is displayed; the colon flashes.
Setting the time:
Press key 1 for more than 3 seconds: The time flashes. Set the time
with key 2 or 3. Press key 1 within 5 seconds: The time is displayed
and the colon flashes.
Note:
If, after the time has been set, key 1 is not pressed within 5 seconds,
the Mini-Clock will be transferred to the mode “Setting the Heating
Time”.
Setting the heating time:
Press key 1 for more than 3 seconds: The time flashes. The Mini-
Clock is automatically transferred to the mode “Setting the Heating
Time” if no key is pressed for 5 seconds.
The heating symbol is displayed, and the heating time flashes.
Set the heating time (10 to 120 minutes) with key 2 or 3.
Press key 1: The time is displayed once again and the colon flashes.
Setting the preset time:
Press key 1 once, twice or three times to call the preset time 1, 2
or 3. The display will then indicate the preset time, for instance 1
and symbol 1. Set the preset time with key 2 or 3. The preset time
is activated or deactivated with key 4. The “ON” symbol is displayed
when the preset time has been activated.
Symbol 1, 2 or 3 is displayed when the preset time is activated.
Operating functions of the Mini-Clock
Switching on the heater:
Press key 4. The heating duration is … minutes.
The display indicates the remaining heating time and symbol 7.
Switching off the heater:
Press key 4. The heating continues for approx. 3 minutes.
The display indicates the current time.
1Key to activate the setting capabilities
2 / 3 Time setting keys forwards / backwards
4ON / OFF key to activate / deactivate the preset time
5Current time, preset time and heating time
6Symbol for activated preset time
7Symbol for heater operation
8Symbol for preset time 1, 2 or 3
Continuous operation:
Press key 3 and keep it depressed while pressing key 4. The
heater will now remain switched on until key 4 (switching off the
heater) is pressed again.
Preset time – Activate / deactivate:
Press key 1 to select the preset time 1, 2 or 3. Activate or deacti-
vate the preset time with key 4.
The “ON” symbol is displayed when the preset time is activated.
Symbol 1, 2 or 3 is displayed when the preset time is activated.
Special functions only in conjunction
with the TP41 / TP41i remote control
Programming the receiver to recognize the transmitter:
Press key 2 and keep it depressed while pressing key 4.
The display indicates 2 horizontal lines.
The display returns to its initial state when the receiver has been
successfully programmed. The display automatically returns to the
initial status after 35 seconds if the transmitter is not recognized. In
this case repeat the above procedure once again.
Installing and connecting the Mini-Clock
Follow the drawing to install the Mini-Clock.
The drilling template (can be peeled off and is self-adhesive)
is applied on the front.
Follow the diagram to connect the Mini-Clock.
Note:
Do not press the display and control panel when installing the Mini-
Clock.
Connecting diagram
1
2
3
ON
20:05
o 7,5
o 2,5
Eberspächer
Mounting drawing
4
23
1
2
4
1
3
1 3
2 4
B1 S1
88:88
ge
br
bl
rt
0,5 br
0,5 ge
0,5 rt
4 3 2 1
B1
S1
Drilling template Resilient base
for uneven mounting surfaces
Connection for TP41 / TP41i remote control
Plug and socket case are shown from the line entry side.
Produktspecifikationer
| Varumärke: | Eberspacher |
| Kategori: | Uppvärmning |
| Modell: | Mini-Clock |
Behöver du hjälp?
Om du behöver hjälp med Eberspacher Mini-Clock ställ en fråga nedan och andra användare kommer att svara dig
Uppvärmning Eberspacher Manualer
15 September 2024
15 September 2024
15 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
14 September 2024
Uppvärmning Manualer
- Uppvärmning AEG
- Uppvärmning Junkers
- Uppvärmning Quigg
- Uppvärmning Remeha
- Uppvärmning Vaillant
- Uppvärmning Toolland
- Uppvärmning Eurom
- Uppvärmning Gude
- Uppvärmning Stiebel Eltron
- Uppvärmning Bionaire
- Uppvärmning Dimplex
- Uppvärmning Easymaxx
- Uppvärmning Suntec
- Uppvärmning DIO
- Uppvärmning Danfoss
- Uppvärmning Duux
- Uppvärmning Atlantic
- Uppvärmning Mill
- Uppvärmning Blumfeldt
- Uppvärmning Day
- Uppvärmning Vasco
- Uppvärmning Sonnenkonig
- Uppvärmning Jaga
- Uppvärmning REMKO
- Uppvärmning Thermor
- Uppvärmning Brink
- Uppvärmning Duronic
- Uppvärmning Kemper
- Uppvärmning Supra
- Uppvärmning Heatstrip
- Uppvärmning Zymbo
- Uppvärmning Myson
- Uppvärmning BeF Home
- Uppvärmning FlinQ
- Uppvärmning Webasto
- Uppvärmning Mio Star
- Uppvärmning Wallas
- Uppvärmning Mesa Living
Nyaste Uppvärmning Manualer
18 Oktober 2024
5 Oktober 2024
5 Oktober 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024