Ei Electronics Ei 410 Bruksanvisning
Ei Electronics
Fjärrkontroll
Ei 410
Läs nedan 📖 manual på svenska för Ei Electronics Ei 410 (2 sidor) i kategorin Fjärrkontroll. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
TEST
TEST
TEST
RED
LIGHT UPPER
LOWER
The Ei410T Remote Control is an excellent accessory to
help you manage and maintain your Alarms. It is
designed for use with the SmartTest range of Alarms
(models: Ei3100RF, Ei3103RF & Ei3105RF).
The Remote Control is used to test the alarms from a
distance. There is therefore no need for chairs, ladders or
poles to help you reach the alarms test button.
INSTALLATION
1. For ease of installation, the Remote Control is supplied
with the battery connected and ready to use.
2. Press the Test button on the Remote Control until the
red light comes on. The red light indicates a radio
frequency (RF) signal is being sent. (If this does not work,
remove the battery (see Figure 1(a)), hold down the Test
button for 10 seconds and then re-install the battery). The
Alarms should respond within 20 seconds once they are
within range (typically the range is over 10 metres indoors
but this will depend on the type of walls etc.).
3. As with all SmartTest products, it is essential that you
House Code your Remote Control with your Alarms to
prevent false alarms and other interference with nearby
systems (see overleaf).
House Coding the Ei410T Remote Control
Some of the SmartTest products can transmit and receive
over 150 metres (in free space) so it is important to
ensure neighbouring systems do not interfere with your
system and vice versa.
FIVE YEAR GUARANTEE (Limited)
Ei Electronics guarantees this product (excluding the
battery) against any defects that are due to faulty material
or workmanship for a five year period after the original
date of purchase. This guarantee only applies to normal
conditions of use and service, and does not include
damage resulting from accident, neglect, misuse unau-
thorized dismantling or contamination howsoever
caused. If this product has become defective it must be
returned to one of the addresses below (see "Getting
Your Remote Control Serviced") with proof of purchase.
If the product has become defective during the five year
guarantee period the unit will be repaired or replaced
without charge. This guarantee excludes incidental and
consequential damages.
Do not interfere with the product or attempt to tamper with
it. This will invalidate the guarantee.
Ei Electronics
Shannon Industrial Estate,
Shannon, Co. Clare, Ireland.
Telephone: +353 (0)61 471277
www.eielectronics.com
Smoke/Heat Alarm
Remote Control
Model: Ei410T
The following procedure will House Code your Remote
Control with your SmartTest Alarms. After the House
Coding procedure, the SmartTest Alarms and the Remote
Control will only communicate with other units House
Coded at the same time.
1. Place all the SmartTest Alarms into House Code mode,
within 10 minutes, by pressing their House Code buttons,
as described in their instruction leaflets.
2. Also, within the same 10 minutes, place the Ei410T
Remote Control into House Code mode by pressing and
holding the “Upper & Lower” buttons (see Figure 1(b))
simultaneously until the red light turns on. Release the
buttons and the red light will now flash continuously (for
15 minutes) to show it is in House Code mode.
3. The Remote Control will now send a House Coded
radio message every 5 seconds with its House Code
serial number. All Alarms within range, that are also in
House Code mode themselves, will memorise the House
Code serial number of the Remote Control.
Note: It may be necessary to move around the property
with the Remote Control to ensure that all Alarms have
received the signal.
4. Check that the number of amber light flashes (for
SmartTest Alarms) corresponds with the number of units
in the system (i.e. Alarms plus Remote Control). For
example, with 3 SmartTest Alarms and 1 Remote Control
you should see 4 light flashes from each Alarm.
5. Remove all the SmartTest Alarms from House Code
mode as described in their instruction leaflets.
6. Remove the Remote Control from House Code mode
by pressing and holding the “Upper & Lower” buttons
simultaneously until the red light comes on constantly
(i.e. the same method as used to enter House Code
mode). Release the buttons and the red light will no
longer flash, indicating that the Remote Control has
exited House Code mode.
(Alternatively, the Remote Control will exit the House
Code mode by itself after 15 minutes without further user
intervention. However, this could result in problems with
nearby systems if their units are being House Coded at
the same time).
7. Finally, test each Alarm with the Remote Control and
verify that the Remote Control activates it.
If some or all of the Alarms are not activated by the
Remote Control repeat the House Code procedure again.
Clearing the House Codes
It may be necessary at some stage to clear the House Codes (e.g. if
you wanted to use the Remote Control with different un-coded
alarms).
To clear the House Codes:
Hold all three buttons down together, until the red light comes on and
then release. This may take up to 10 seconds.
Note: clearing the House Codes will now reset the Remote Control to
the original factory setting. It will now only communicate with un-
coded Alarms.
Manual Testing with Remote Control Ei410T
Press the Test button on the Remote Control. The red
light will come on to indicate it is transmitting an RF
signal. Then:
• the units will alarm within 20 seconds.
We recommend that you manually test your alarms
weekly using your Ei410T Remote Control.
Battery Replacement
The battery will normally last for 10 years. If it fails to
communicate with the Alarms and/or the red light looks
dim or does not light when a button is pressed, the battery
is depleted and must be replaced.
Slide cover back (as shown in Figure 1) and remove the
battery. Press the Test button for 10 seconds and then
replace with a new Lithium 3 Volt Cell type DL2032 or
CR2032. Ensure battery orientation is correct as shown
in Figure 1(b).
Getting your Remote Control Serviced
If your Remote Control fails to work after you have read
this leaflet contact Customer Assistance at the nearest
address given at the end of this leaflet. If it needs to be
returned for repair or replacement put it in a padded box
with the battery disconnected. Send it to "Customer
Assistance and Information" at the nearest address given
on Remote Control or in this leaflet. State the nature of
the fault, where the Remote Control was purchased and
the date of purchase.
Note: It may be necessary, sometimes, to return a
Smoke/Heat Alarm (see Smoke/Heat Alarm instruction
leaflet) along with the Remote Control, if you cannot
establish which may be faulty.
P/N A16476 Rev0
Figure 1(a) Figure 1(b)
1 2 34
0889
The crossed out wheelie bin symbol that is on your
product indicates that this product should not be disposed
of via the normal household waste stream. Proper
disposal will prevent possible harm to the environment or
to human health. When disposing of this product please
separate it from other waste streams to ensure that it can
be recycled in an environmentally sound manner. For
more details on collection and proper disposal, please
contact your local government office or the retailer where
you purchased this product.
Produktspecifikationer
Varumärke: | Ei Electronics |
Kategori: | Fjärrkontroll |
Modell: | Ei 410 |
Behöver du hjälp?
Om du behöver hjälp med Ei Electronics Ei 410 ställ en fråga nedan och andra användare kommer att svara dig
Fjärrkontroll Ei Electronics Manualer
9 Augusti 2024
Fjärrkontroll Manualer
- Fjärrkontroll Sony
- Fjärrkontroll Xiaomi
- Fjärrkontroll Philips
- Fjärrkontroll Panasonic
- Fjärrkontroll Garmin
- Fjärrkontroll Kenwood
- Fjärrkontroll Medion
- Fjärrkontroll Canon
- Fjärrkontroll Abus
- Fjärrkontroll Alpine
- Fjärrkontroll Amazon
- Fjärrkontroll Arcam
- Fjärrkontroll Strong
- Fjärrkontroll Hikvision
- Fjärrkontroll Omega
- Fjärrkontroll Spektrum
- Fjärrkontroll Nedis
- Fjärrkontroll Thomson
- Fjärrkontroll SilverStone
- Fjärrkontroll Targus
- Fjärrkontroll Vivanco
- Fjärrkontroll Sitecom
- Fjärrkontroll Meliconi
- Fjärrkontroll Logitech
- Fjärrkontroll Energy Sistem
- Fjärrkontroll Trust
- Fjärrkontroll Hähnel
- Fjärrkontroll KlikaanKlikuit
- Fjärrkontroll Tripp Lite
- Fjärrkontroll Vision
- Fjärrkontroll Toa
- Fjärrkontroll DataVideo
- Fjärrkontroll Optex
- Fjärrkontroll Benning
- Fjärrkontroll Hama
- Fjärrkontroll Sonos
- Fjärrkontroll Kensington
- Fjärrkontroll Chamberlain
- Fjärrkontroll Velleman
- Fjärrkontroll Rockford Fosgate
- Fjärrkontroll Technics
- Fjärrkontroll Steren
- Fjärrkontroll Kicker
- Fjärrkontroll Bose
- Fjärrkontroll KPN
- Fjärrkontroll Steinel
- Fjärrkontroll Grohe
- Fjärrkontroll Marantz
- Fjärrkontroll Bigben Interactive
- Fjärrkontroll ESYLUX
- Fjärrkontroll Pro-Ject
- Fjärrkontroll Genius
- Fjärrkontroll Kathrein
- Fjärrkontroll AV:link
- Fjärrkontroll Neumann
- Fjärrkontroll DJI
- Fjärrkontroll Vello
- Fjärrkontroll Audiovox
- Fjärrkontroll Cotech
- Fjärrkontroll Insignia
- Fjärrkontroll Vogels
- Fjärrkontroll Unitron
- Fjärrkontroll Danfoss
- Fjärrkontroll MB Quart
- Fjärrkontroll Magnus
- Fjärrkontroll FireAngel
- Fjärrkontroll Tascam
- Fjärrkontroll Wacom
- Fjärrkontroll Clas Ohlson
- Fjärrkontroll TomTom
- Fjärrkontroll Viper
- Fjärrkontroll Konig
- Fjärrkontroll Rotel
- Fjärrkontroll Vizio
- Fjärrkontroll Rademacher
- Fjärrkontroll Vakoss
- Fjärrkontroll JL Audio
- Fjärrkontroll Metronic
- Fjärrkontroll Technaxx
- Fjärrkontroll One For All
- Fjärrkontroll T'nB
- Fjärrkontroll Hannspree
- Fjärrkontroll Marmitek
- Fjärrkontroll Delta Dore
- Fjärrkontroll Schaudt
- Fjärrkontroll Niko
- Fjärrkontroll Jensen
- Fjärrkontroll Humax
- Fjärrkontroll Vaddio
- Fjärrkontroll Jung
- Fjärrkontroll Apart
- Fjärrkontroll Genaray
- Fjärrkontroll DSC
- Fjärrkontroll HQ
- Fjärrkontroll Nanlite
- Fjärrkontroll Profoto
- Fjärrkontroll Verizon
- Fjärrkontroll Metra
- Fjärrkontroll Revox
- Fjärrkontroll CME
- Fjärrkontroll Ruwido
- Fjärrkontroll Russound
- Fjärrkontroll Watson
- Fjärrkontroll Geemarc
- Fjärrkontroll Hegel
- Fjärrkontroll RGBlink
- Fjärrkontroll Nexa
- Fjärrkontroll Scosche
- Fjärrkontroll Wentronic
- Fjärrkontroll EQ3
- Fjärrkontroll Homematic IP
- Fjärrkontroll Revo
- Fjärrkontroll Chief
- Fjärrkontroll Arctic Cooling
- Fjärrkontroll Crestron
- Fjärrkontroll ORNO
- Fjärrkontroll ETiger
- Fjärrkontroll Manfrotto
- Fjärrkontroll Aeon Labs
- Fjärrkontroll Provision ISR
- Fjärrkontroll Monacor
- Fjärrkontroll Logilink
- Fjärrkontroll Fortin
- Fjärrkontroll Zalman
- Fjärrkontroll Simplify
- Fjärrkontroll SIIG
- Fjärrkontroll IOGEAR
- Fjärrkontroll Ferguson
- Fjärrkontroll Wet Sounds
- Fjärrkontroll Swiss Sense
- Fjärrkontroll Extron
- Fjärrkontroll SVS
- Fjärrkontroll Antec
- Fjärrkontroll Ebode
- Fjärrkontroll Reely
- Fjärrkontroll Libec
- Fjärrkontroll Furman
- Fjärrkontroll Medion MD6461
- Fjärrkontroll Vimar
- Fjärrkontroll TCM
- Fjärrkontroll Pixel
- Fjärrkontroll Uni-T
- Fjärrkontroll Antelope Audio
- Fjärrkontroll H-Tronic
- Fjärrkontroll PDP
- Fjärrkontroll Intertechno
- Fjärrkontroll Schwaiger
- Fjärrkontroll Ecler
- Fjärrkontroll PeakTech
- Fjärrkontroll Heitech
- Fjärrkontroll Bravo
- Fjärrkontroll Neewer
- Fjärrkontroll Maximex
- Fjärrkontroll Bang Olufsen
- Fjärrkontroll TV Vlaanderen
- Fjärrkontroll Innr
- Fjärrkontroll TELE System
- Fjärrkontroll Voxx
- Fjärrkontroll Multibrackets
- Fjärrkontroll Beoplay
- Fjärrkontroll Prolectrix
- Fjärrkontroll Remotec
- Fjärrkontroll Audiofrog
- Fjärrkontroll Memphis Audio
- Fjärrkontroll AMX
- Fjärrkontroll Nanoleaf
- Fjärrkontroll Tiq
- Fjärrkontroll Elbe
- Fjärrkontroll GBS Elettronica
- Fjärrkontroll Sonoff
- Fjärrkontroll Gewiss
- Fjärrkontroll Insteon
- Fjärrkontroll Mosconi
- Fjärrkontroll Lutron
- Fjärrkontroll CGV
- Fjärrkontroll C2G
- Fjärrkontroll Universal Remote Control
- Fjärrkontroll Control4
- Fjärrkontroll MIOPS
- Fjärrkontroll CSL
- Fjärrkontroll Compustar
- Fjärrkontroll Aplic
- Fjärrkontroll Ridem
Nyaste Fjärrkontroll Manualer
27 Oktober 2024
26 Oktober 2024
21 Oktober 2024
18 Oktober 2024
18 Oktober 2024
12 Oktober 2024
8 Oktober 2024
8 Oktober 2024
8 Oktober 2024
8 Oktober 2024