Electro Harmonix Nano Battalion Bruksanvisning

Electro Harmonix Gitarrförstärkare Nano Battalion

Läs nedan 📖 manual på svenska för Electro Harmonix Nano Battalion (4 sidor) i kategorin Gitarrförstärkare. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

NANO BATTALION

BASS PREAMP + OVERDRIVE

Congratulations on your purchase of the Electro-Harmonix Nano

Battalion. The all-analog circuitry of the Nano Battalion provides you

with an amazing variety of bass tones in a sturdy and compact pedal. At

the core of the Nano Battalion’s tone is a versatile MOSFET drive circuit

that can range from a subtle, light overdrive to fully saturated distortion.

A flexible three band equalizer includes a three way EQ Position switch

to select where the EQ falls in the pedal’s signal path.

The Nano Battalion features a normal ¼” input, plus a ¼” output that

can output either a normal, unbalanced signal (with a normal TS cable)

or a balanced signal (with a TRS cable) to go right into a mixing console

or recording interface. The Nano Battalion features buffered bypass and

runs on a standard 9.6VDC center negative supply, drawing 45mA.

- Using the Nano Battalion -

Plug the 9VDC adapter into the jack on the top of the Nano Battalion.

The unit must be powered to pass signal even in bypass. Connect an

instrument cable from your bass into the jack. Insert a normal INPUT

TS instrument cable between the jack and a suitable amplifier, OUTPUT

or insert a TRS cable (or TRS to male XLR cable) between the OUTPUT

jack and a suitable mixing console or recording interface. Click the

BYPASS footswitch to engage the Nano Battalion. The LED lights to

indicate that the unit is active.

WARNING:

Your

Nano Battalion

comes equipped with an Electro

Harmonix 9.6DC

200BI

power supply (same as used by Boss

& Ibanez

: 9.6 Volts DC 200mA). The Nano

Battalion requires at 9VDC with a center negative plug. Use of the wrong adapter 45mA

or a plug with the wrong polarity may damage your Nano Battalion and void the warranty.

- Main Control -

BYPASS Footswitch & LED – The LED illuminates when the effect is

engaged. The LED will not light if the Nano Battalion is bypassed. Press

the footswitch to toggle between effect on and buffered bypass mode.

VOL Knob – Sets master output level of the pedal.

BLEND Knob – Sets the ratio between clean signal and distorted signal.

Turn BLEND up for more distorted signal.

DRIVE Knob – Sets the intensity and saturation of the distortion.

TONE Knob – Cuts high frequencies from the distortion as you turn the

knob down.

EQ CONTROLS:

TREBLE Knob – Boost or cut high end. No effect when the knob is at

50%. Boosts/cuts frequencies starting above 1kHz. Maximum boost/cut

about +/-12dB around 5kHz.

BASS Knob – Boost or cut low end. No effect when the knob is at 50%.

Boosts/cuts frequencies starting below 200Hz. Maximum boost/cut

about +/-12dB around 60Hz.

MID Switch – No effect when the switch is in the middle position. In

the upwards position, 9dB boost around 500Hz. In the downwards

position, 9dB cut around 500Hz.

- EQ POS. & Signal Path -

The EQ POS switch determines where the EQ (TREBLE, BASS, and MID

controls) falls in the Nano Battalion’s signal path. In all cases, the TONE

control comes immediately after the distorted signal, and the VOL control

is last in the signal path. There are three EQ POS modes, illustrated on

the next page.

- FCC COMPLIANCE -

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. If the device

is not installed and used in accordance with the instructions, it may

cause harmful interference to radio communications and void the user's

authority to guarantee the equipment.

Note:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help .

Modifications not expressly approved by the manufacturer could void the

user's authority to operate the equipment under FCC rules.

The CE logo indicates that this product has been tested and shown to conform

with all applicable European Conformity directives.

DIST MODE:

In DIST mode the EQ comes after the distortion signal, having a strong

effect on the sound of the distorted signal. The clean signal is not

affected by the EQ at all.

INPUT MODE:

In INPUT mode the EQ comes first in the signal path, affecting both the

clean signal and the signal fed into the distortion. Boosting frequencies

in this mode can help drive the distortion signal to a more saturated

tone.

DRY MODE:

In DRY mode the EQ affects the clean signal, but doesn’t affect the

distorted signal at all.

Produktspecifikationer

Varumärke:	Electro Harmonix
Kategori:	Gitarrförstärkare
Modell:	Nano Battalion
Färg på produkten:	Grijs
Vikt:	113770 g
Bredd:	800 mm
Djup:	1000 mm
Höjd:	2053 mm
Förpackningens vikt:	117000 g
Förpackningens bredd:	1050 mm
Djuppackning:	850 mm
Förpackningshöjd:	2103 mm
Snäll:	Vrijstaande rek
Justerbara fötter:	Ja
Ursprungsland:	Turkije
Kod Storbritanniens handelstull:	94032080
Maximal viktkapacitet:	800 kg
Material:	Staal
Inklusive skruvar:	Ja
Antal skruvar:	36
Förbättrad kabelhantering:	Ja
Rackkapacitet:	42U
Harmoniserad systemkod (HS):	85381000
Förpackningsvolym:	1876930 cm³
Nyckelfack:	Ja
Rerails:	Ja
Nötter ingår:	Ja
Installationsdjup (max):	943 mm
Installationsdjup (min):	688 mm
Justerbart djup:	Ja
Sidopanelkonstruktion:	Staal
Mängd nötter:	36
Medföljande sidopaneler:	Nee
Justerbara monteringsskenor:	Ja
Ytterdörrskonstruktion:	Staal
Bakdörrskonstruktion:	Steel/Perforated
Ytterdörr med nyckellås:	Ja
Nyckellås bakdörr:	Ja