Electro Harmonix Pitch Fork P Bruksanvisning

Läs nedan 📖 manual på svenska för Electro Harmonix Pitch Fork P (16 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
1
PITCH FORK®+
POLYPHONIC PITCH-SHIFTER/HARMONY PEDAL
Congratulations on your purchase of the Electro-Harmonix PITCH
FORK®+, a fully featured polyphonic pitch-shifter/harmony pedal. The
PITCH FORK®+ has two independent pitch shifting engines each capable
of transposing over a +/- 3 octave range and detuning +/- 99 cents. Both
shift voices have their own volume control and a third for a dedicated DRY
level control. There are two output jacks MAIN and AUX. The AUX output
offers multiple routing options. In addition to a standard bypass
footswitch, there is a second footswitch USER which can be assigned to , ,
a host of tasks. An input for an expression pedal or control voltage can be
assigned to many of the pedal’s parameters. There is an external foot-
controller input for hands-free control and a large easy to read display.
The PITCH FORK®+ has slots for storing and recalling presets. T 100 en
factory presets are pre-loaded to help you get familiar with some of the
pedal’s incredible capabilities.
WARNING: Your PITCH FORK®+ comes equipped with an Electro-Harmonix 9.6VDC /
200mA power supply. The PITCH FORK®+ requires at 9VDC with a center 120mA
negative plug. Using the wrong adaptor or a plug with the wrong polarity may damage
your PITCH FORK®+ and void the warranty.
T C ABLE OF ONTENTS
Quick Start Guide 2
Connections 3
Controls & Display 4
Overview of Modes 5
A Mode UX 6
SHIFT 1 & 2 Mod es 7
EXP Mode 8
USER Mode 9
X-MOD Mode 10
PRESET Mode 11
Restoring Factory Presets 12
LATCH Mode 13
EXT Footswitch Functions 14
Compliance 15
Warranty Information 16
2
Q S G UICK TART UIDE
Plugging in the PITCH FORK®+
1. Connect the EHX9.6DC Power Adapter into the 9V jack at the top
of the pedal. Plug the AC Adapter into an AC outlet.
2. Connect your guitar or other instrument to the INPUT jack using
a standard 1/4” instrument cable. Connect the MAIN OUTPUT
jack to your amp with another standard 1/4” instrument cable.
3. If using AUX, also connect the AUX OUTPUT jack to an additional
amp using another standard 1/4” instrument cable.
4. If using an expression pedal, such as the Electro-Harmonix
Expression, connect to the EXP jack with a TRS Cable.
5. If using an external three-button foot controller, such as the
Electro-Harmonix Triple Foot Controller connect to the EXT jack ,
with TRS cable.a
Loading a Factory Preset
1. Press the PRESET mode button.
2. Turn the VALUE knob to scroll through factory presets
1
-
10
.
3. Press VALUE to load the selected blinking preset.
Creating a User Preset
1. Press the PRESET mode button.
2. Turn the VALUE knob counterclockwise to scroll down to
LIVE:
- LIVE is template that can be used for creating a preset. a
- LIVE settings can be saved to a preset slot to recall after a
power cycle.
3. Press VALUE to load LIVE.
4. Press the SHIFT 1 button then turn VALUE to adjust the
semitone setting for SHIFT 1.
5. Press the SHIFT 2 button then turn VALUE to adjust the
semitone setting for SHIFT 2.
6. Adjust DRY, SHIFT 1, and SHIFT 2 volume knobs to create the
desired mix.
7. Press the PRESET button and turn the VALUE encoder to select
an empty preset . An empty preset slot will not have a dot in slot
the lower right corner like the factory presets. Slots 11-100, by
default, are blank from the factory.
8. Press and hold VALUE for two seconds to initiate the saving
process. The saving process is complete when the PRESET LED
stops blinking.
3
C ONNECTIONS
INPUT Jack Audio input with an impedance of 2.2M Ω.
MAIN OUTPUT Jack Main audio output with an impedance of 470Ω.
AUX OUTPUT Jack Auxiliary audio output with an impedance of 470 Ω.
EXP Jack Expression pedal or control voltage (CV) input. The PITCH
FORK®+ allows for an expression pedal to assigned to a number of be
different parameters. S section for more details. ee EXP Mode
Expression input jack accepts a TRS expression pedal connector or a Tip-
Sleeve 0-5V control voltage input. The expression pedal should ideally use
a 10k potentiometer with linear taper. It must have the wiper connected
to TIP and toe-down connected to RING. Pedals made by some
manufacturers do not conform to this convention and would need a special
cable to swap RING and TIP. Some suggested Expression Pedals: EHX
Expression Pedal, EHX Dual Expression, M-Audio® -P, MoogEX ® -2 & EP
EP-3, Roland® -5 or BossEV ® -500L. FV
EXT JACK TRS input for connecting a generic external foot-controller
such as the EHX Triple Foot Controller or Digitech® FS3X A foot-controller .
has three footswitches: MODE (Tip), UP (Ring) and DOWN (Tip+Ring).
These can be used for changing modes, entering/exiting sub-menus,
loading presets, and scrolling parameter values. Saving presets cannot be
done using an external foot-controller. S the section for more ee EXT
details.
9V Power Jack Power input for the EHX 9.6DC 200mA power adapter.
The PITCH FORK®+ uses 2.1mm center-negative barrel plug and a
requires a current rating of at least 120mA at 9VDC.

Produktspecifikationer

Varumärke: Electro Harmonix
Kategori: Inte kategoriserad
Modell: Pitch Fork P

Behöver du hjälp?

Om du behöver hjälp med Electro Harmonix Pitch Fork P ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Electro Harmonix Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer