Electro Harmonix Cock Fight Plus Bruksanvisning

Läs nedan 📖 manual på svenska för Electro Harmonix Cock Fight Plus (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
1
Cock Fight Plus
Wah and Talking Pedal with Fuzz
What happens when you mate our popular (Cocked Talking Cock Fight
W with Fuzz) with a foot controlled rocker pedal? You get the Cock ah
Fight Plus! The Cock Fight Plus can be switched between two types of
filters: a traditional wah pedal filter (“CRY”), or a formant filter (“TALK”)
that you can use to create vowel sounds. Vary the sweep of either filter
with the integrated foot pedal. The Cock Fight Plus also includes FUZZ a
section that can be added before or after the filter, or taken out of the
circuit entirely. Use the BOTTOM and BIAS controls to explore even more
tone shaping possibilities .
CONTROLS
ENTERING/EXITING BYPASS
Toggle between and by firmly pushing buffered bypass effect mode
the Cock Fight Plus pedal downward, in the toe direction, until you hear
a click from its footswitch.
Please Note: The Cock Fight Plus does not provide a visual indication
that it is in either effect or bypass mode or that it is powered up.
PLAYING THE COCK FIGHT PLUS
While in effect mode, rock your foot back and forth on the pedal to
sweep the filter and alter the tone of your instrument .
COCKING THE COCK FIGHT PLUS
You may find your tone is especially sweet at certain spots along the
pedal’s sweep. When you hit just the right spot, carefully remove your
foot from the pedal so that the tone remains fixed. This use of the pedal
is commonly referred to as a “cocked wah.
2
VOL Knob
Use the (volume) knob to adjust the master output volume. VOL
CRY/TALK Toggle Switch
The “up” position selects the CRY setting. CRY simulates the type of
filter found in a typical wah pedal circuit. The “down” position selects the
TALK setting. This setting as its name implies produces throaty/vocal — —
vowel sounds.
FUZZ PRE/X/POST Toggle Switch
The position places the fuzz before the filter. Use this position for a PRE
more vintage Hendrix vibe. The position marked removes the fuzz X
entirely from the circuit. The position places the fuzz after the POST
filter and yields a more modern sound.
BOT Knob
The (BOTTOM) Knob is a low frequency boost control that is BOT
slightly above unity gain when set fully clockwise. Set this knob fully
counterclockwise to remove the BOTTOM circuit from the signal path.
TIP: When used with a bass guitar or other low frequency sources, the
BOTTOM adjustment can help retain the bottom end typically lost along
certain positions of the filter sweep.
TONE Knob
Use the knob to vary the fuzz sound from dark to bright. TONE
BIAS Knob
The knob controls the amount of bias voltage supplied to one of BIAS
the two transistors in the fuzz circuit. Turn the BIAS knob fully clockwise
to supply a nominal voltage produce to a “normal” fuzz sound. Turn the
bias control down (counterclockwise) to decrease the bias voltage to get
the -called so “dying battery” sound. This type of sound is characterized
by a decrease in sustain and by notes that get choked off as you play
with less force.
DRIVE Knob
Set the amount of fuzz with the knob. DRIVE
3
INPUT/OUTPUT/POWER/SPECS
INPUT Jack
This ¼” jack is the audio input for the Cock Fight Plus .
OUTPUT Jack
This ¼” jack is the audio output for the Cock Fight Plus .
POWER
Internal Battery INPUTPlug a cable into the jack to activate power
from the included internal 9V battery. When using battery power, unplug
the input cable from the input jack when the unit is not in use to avoid
running down the battery. The pedal’s battery may be left in or taken
out when the external AC Adapter is in use.
External 9VDC AC Power The power jack input (marked 9V) is
located next to the OUTPUT jack. Use a 9VDC AC Adapter capable of
delivering at least 50 mA of current power the pedal. The inner ring of to
the 9VDC AC Adapter must be negative, and the outer ring positive. You
may choose to obtain the optional Electro-Harmonix 9.6DC-200 power
supply, which is the same type of 9.6 Volts DC/200mA power supply as
used by Boss® & Ibanez®.
Please Note: Using the wrong adapter or a plug with the wrong polarity
may damage your Cock Fight Plus and void the warranty.
CHANGING THE BATTERY
1. We recommend the use of 9V alkaline batteries.
2. Locate the battery door on the underside of the pedal.
3. Push the tab of the battery door towards OPEN to unlock the door;
pull the door up until it locks into its open position.
4. Connect your new 9V battery to the wired battery connector.
5. Insert/slide the 9V battery into the battery holder compartment.
6. Push the battery door down and firmly snap it clos . ed
NOTES AND SPECIFICATIONS
The Cock Fight Plus utilizes a high quality buffered bypass.
•  Input Impedance: 1M
•  Nominal Output Impedance: 3k
Current draw: 30 mA

Produktspecifikationer

Varumärke: Electro Harmonix
Kategori: Inte kategoriserad
Modell: Cock Fight Plus

Behöver du hjälp?

Om du behöver hjälp med Electro Harmonix Cock Fight Plus ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Electro Harmonix Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer