Electro Harmonix V256 Vocoder Bruksanvisning

Electro Harmonix Inte kategoriserad V256 Vocoder

Läs nedan 📖 manual på svenska för Electro Harmonix V256 Vocoder (16 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

V256

Vocoder

Congratulations on your purchase of the Electro-Harmonix V256 Vocoder The V256 is a .

versatile and easy to use vocoder with the added benefit of being in a compact pedal format.

Musicians no longer need large rack equipment, computer plugins, or large keyboards to get

a wide array of classic and modern vocoder sounds as well as a few very unique vocal

transposition effects. The V256 includes internal synthesizers for easy vocoding without an

external instrument.

Special Features of th V256: e



3 VOX-ROBO vocoder modes that feature a robotic synthesizer



Single, Major, and Minor modes feature a drone synthesizer



3 Brand new vocal transposition modes including TRANSPOSITION INSTRUMENT CTRL, and ,

REFLEX-TUNE



Vocoder bands adjustable from a vintage sounding 8 bands to a smooth sounding 256 bands



TONE GENDER BENDER, and PITCH controls ,



Save and load up to 9 presets: 1 preset for each mode.



Scroll through the presets using the MODE knob or PRESET footswitch.



Built-In balanced Mic Pre-Amp with switchable Phantom Power and Gain adjustment.



Effect output on balanced XLR line output and 1/4” unbalanced instrument output

WARNING: Use only the AC Adapter that the V256 comes supplied

with Do not use any other AC Adapters. Using other AC adapters, .

even those made by Electro-Harmonix, could cause harm to the unit,

the adapter or you. The V256 does not use batteries.

- QUICK START GUIDE -

BASIC MIXER CONNECTION SETUP

1. Connect your microphone to the MIC input on the right side of the V256 using a

balanced XLR cable .

2. Using an unbalanced instrument cable, plug your instrument into the INST Input Jack on

the right side of the V256.

3. Connect a balanced XLR cable to the EFFECT output jack on the left side of the V256.

Connect the other end of the XLR cable to the line input of a mixer.

4. Connect an unbalanced instrument cable from the INST output jack on the left side of

the V256 Connect the other end of the instrument cable to the instrument input of a .

mixer, or the input of an amplifier.

5. Plug the AC Adapter into a wall outlet.

6. Plug the barrel connector of the AC Adapter into the 9V power jack at the top of the

V256.

Polarity is center negative

7. If using a condenser microphone, flip the Phantom Power switch up to the top position,

otherwise leave it off. The Phantom Power switch is located on the right side of the

V256, next to the XLR M input. IC

8. Push the M BYPASS footswitch until its associated LED is OFF. Sing into the IC

microphone, you will hear your dry vocal at this point. Adjust mixer settings as well as

the MIC GAIN switch on the V256 to obtain optimal mic levels.

BASIC AMPLIFIER CONNECTION SETUP

1. Connect your microphone to the MIC input on the right side of the V256 using a

balanced XLR cable.

2. Using an unbalanced instrument cable, plug your instrument into the INST Input Jack on

the right side of the V256.

3. Connect an unbalanced instrument cable from the INST output jack on the left side of

the V256. Connect the other end of the instrument cable to the input of a guitar, bass,

or keyboard amplifier.

4. Plug the AC Adapter into a wall outlet.

5. Plug the barrel connector of the AC Adapter into the 9V power jack at the top of the

V256.

Polarity is center negative

6. If using a condenser microphone, flip the Phantom Power switch up to the top position,

otherwise leave it off. The Phantom Power switch is located on the right side of the

V256, next to the XLR MIC input.

7. Push the MIC BYPASS footswitch until its associated LED is OFF. Play the instrument,

you will hear only dry instrument signal at this point.

8. The factory setting for the INST output of the V256 is 100% dry instrument signal only.

In order to use the V256 in this mode the INST output blend needs to be adjusted.

9. Hold down the MIC BYPASS footswitch and adjust the BLEND knob. Fully CCW is 100%

instrument signal. As you turn the knob CW more V256 effect signal is added and at

noon, the mix of dry instrument to V256 effect will be even. As you continue to turn the

knob CW past noon, the dry instrument level will decrease and at fully CW the mix will

be 100% V256 effect.

10. After the BLEND knob is adjusted for the desired mix, release the MIC BYPASS

footswitch and the instrument output mix will be set. the MIC BYPASS is not held If

down, moving the blend knob will make no difference to the INST output mix.

BASIC VOCODER SETTINGS

1. Now that the V256 is hooked up and ready to go, here is a sample setting to get started.

2. Turn the MODE knob until the mode VOX-ROBO 1 is selected and set the other

parameters as follows:

-BLEND FULLY CW

-BANDS NOON

-TONE NOON

-GENDER NOON

-PITCH FULLY CW

3. Press and release the MIC BYPASS footswitch so that the effect is now ON and the LED

is lit.

4. Play the instrument and sing into the microphone at the same time. You will now hear

your voice modulating the sound of the carrier instrument.

5. To use the internal synthesizer, turn the PITCH knob to noon.

6. Sing into the microphone and you will hear your voice modulate the robotic synth.

7. These basic settings also apply to the single, major, and minor drone modes.

BASIC VOCAL TRANSPOSITION SETTINGS

1. Turn the MODE knob until the mode TRANSPOSITION is selected and set the other

parameters as follows:

-BLEND FULLY CW

-BANDS NOON

-TONE NOON

-GENDER NOON

-PITCH NOON

2. In this setting the vocal transposition will be at unity. Using the XLR output, turn BLEND

to noon for a subtle double tracking effect.

3. Adjust the GENDER BENDER knob to hear a more male or female version of your voice.

4. Turn the PITCH knob fully CW to hear 1 octave up, and fully CCW to hear 1 octave

down.

Produktspecifikationer

Varumärke:	Electro Harmonix
Kategori:	Inte kategoriserad
Modell:	V256 Vocoder

Behöver du hjälp?

Om du behöver hjälp med Electro Harmonix V256 Vocoder ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Electro Harmonix Manualer

Electro Harmonix Cock Fight Bruksanvisning

24 September 2024

Electro Harmonix Cock Fight Plus Bruksanvisning

24 September 2024

Electro Harmonix Holy Grail Max Bruksanvisning

24 September 2024

Electro Harmonix The Worm Bruksanvisning

23 September 2024

Electro Harmonix Canyon Echo Bruksanvisning

23 September 2024

Electro Harmonix Spruce Goose Bruksanvisning

23 September 2024

Electro Harmonix Germanium 4 Big Muff Pi Bruksanvisning

23 September 2024

Electro Harmonix LPB-3 Bruksanvisning

22 September 2024

Electro Harmonix Deluxe Memory Man 550-TT Bruksanvisning

22 September 2024

Electro Harmonix Germanium OD Bruksanvisning

22 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024