Elektrobock BT710-1-5 Bruksanvisning

Läs nedan 📖 manual på svenska för Elektrobock BT710-1-5 (13 sidor) i kategorin Termostat. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
• direct heaters
• fl oor heating
• radiant panels, infra-panels
• gas and electric boilers (only with the BPT002 receiver)
Comfortable control of:
2
FUNCTION DESCRIPTION
BPT710 is a wireless thermostat (transmitter) which according to the required room
temperature controls the receiver unit, BPT001, BPT002 or BPT003, which switches
the heating device connected.
DESCRIPTION AND CHARACTERISTICS OF ELEMENTS PHOTO
BPT710 wireless thermostat (transmitter)
measures temperature in the room and controls heating according to
the required temperature
enables setting of 7 weekly temperature programs with 6 changes per
day
can switch up to 9 receivers (BPT001, BPT002, BPT003)
modern design and backlit display
BPT001 wireless receiver – under switch
receiver with switched phase (suitable for, e.g., direct heaters and
panels)
switches the heating device by request and sends back confi rmation
simple installation into a wiring box
receiver statuses indicated by LED diodes on the front panel
automatic activation in the system after a short-term power loss
(E-EPROM)
BPT002 wireless receiver - wall
receiver with potential-free contact (suitable for boilers, etc.)
switches the heating device by request and sends back confi rmation
simple installation into a wiring box
receiver statuses indicated by LED diodes on the front panel
automatic activation in the system after a short-term power loss
(E-EPROM)
BPT003 wireless receiver – in the socket
receiver with switched phase (suitable for. e.g., direct heaters and
panels)
switches the heating device by request and sends back confi rmation
simple installation into an electric socket directly
device simply connected by inserting into the socket (suitable for
heaters with plug outlet)
receiver statuses indicated by LED diodes on the front panel
automatic activation in the system after a short-term power loss
(E-EPROM)
3
BPT710 INSTALLATION
- Lift off the front cover of the transmitter acc. to Fig. 1.
- Fasten the back cover to the wall (or on the wiring box directly); see Fig. 2.
- Insert 2 x 1.5 V alkaline batteries, type AAA (not included in the packing); heed the
correct polarity!
- Fasten the front cover on the back one; see Fig. 4, 5.
- Necessity of battery exchange is indicated by the “ ” LCD symbol.
- Always use the 2 x 1.5 V alkaline batteries, type AAA! (Do not use rechargeable batteries.)
- For correct function of BPT710, activate the receivers according to the instructions
on page 7!
Note: Dispose of old batteries according to regulations for hazardous waste
treatment!
Holes for fastening
screws
Fig.3 Fig.4
Fig.2
Fig.5
Fig.1

Produktspecifikationer

Varumärke: Elektrobock
Kategori: Termostat
Modell: BT710-1-5

Behöver du hjälp?

Om du behöver hjälp med Elektrobock BT710-1-5 ställ en fråga nedan och andra användare kommer att svara dig




Termostat Elektrobock Manualer

Termostat Manualer

Nyaste Termostat Manualer