Elektrobock CV701 Bruksanvisning

Elektrobock Luftfuktare CV701

Läs nedan 📖 manual på svenska för Elektrobock CV701 (4 sidor) i kategorin Luftfuktare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
SENSOR
HUMIDITY
When the set relative humidity (RH) is reached, the
connected device (fan, hood, signaling equipment, etc.).
C
C
C
CV701
V701
V701
V701
CV701
Pb
LEAD FREE
in acco rdanc e
with RoHS
MADE IN CZECH REPUBLIC
MAX.
15-200 W
RH
20-95 %
CV701 is an ideal solution for places where there is a high risk of mold (on
masonry, windows, tiles).
The main function of the CV701 is to control the fan (ventilation) with respect to
the size of the relative humidity (RH) in the room (RH is the percentage of water
vapor content in air at a given temperature compared to air vapor fully saturated at
the same temperature). High RH can cause condensation of water vapor and thus
the formation of mold. Molds not only damage property, but can also seriously
endanger human health (allergies, asthma).
DESCRIPTION
CONSTRUCTION
Remove the terminal cover (Fig.1). Connect the 230V / 50Hz power
supply to the and terminals (the rst two from the right). Connect N L
the device we want to switch to the terminals marked and N, eg the OUT
fan (diagram no. 1). The terminal marked number 1 does not have to be
connected, it is used for connection of external control (diagram no. 2).
After connecting the wires, return the terminal box cover and attach the
CV701 to the installation box.
We always change the fuse for the same type F2A / 1500A, 250V.
Only a person may install and replace the fuse (without voltage)
with the appropriate qualications.
NOTICE
The humidity sensor must be installed at least 1 m from the fan! Select
a location where the sensor will not be aected by direct warm airow
from the heater, sunlight, or other disturbances.
scheme no.1 scheme no.2
230 V/50 Hz 230 V/50 HzL
SETTINGS
At the required humidity (ie whenever we want it to occur
to switch on the connected device) turn the control element (Fig.2)
counterclockwise until the red LED lights up and the connected device
is switched on.
When the set RH value is exceeded, CV701 starts automatically regulate
room ventilation. If the humidity does not reach the set value, the CV701
is inoperative.
When connected with an external switch (diagram no. 2), it is possible to
manually regulate the ventilation regardless of the humidity in the room.
Fig.1 Fig.2
screw
(to remove the cover)
control element
(RH setting)
terminal blocks
(for connecting wires)
red LED
(indication of switching)
position 1
corresponds to
20% RH
(indicative value)
position 10
corresponds to 95%
RH
(indicative value)

Produktspecifikationer

Varumärke: Elektrobock
Kategori: Luftfuktare
Modell: CV701

Behöver du hjälp?

Om du behöver hjälp med Elektrobock CV701 ställ en fråga nedan och andra användare kommer att svara dig


Luftfuktare Elektrobock Manualer

Elektrobock

Elektrobock CV701 Bruksanvisning

29 Augusti 2024

Luftfuktare Manualer

Nyaste Luftfuktare Manualer

Medescan

Medescan WSV0124 Bruksanvisning

4 Januari 2025
Duux

Duux Beam 2 Bruksanvisning

31 December 2025
Brune

Brune B 300 Bruksanvisning

29 December 2024
Boneco

Boneco U100 Bruksanvisning

29 December 2024
Eldom

Eldom Amar NU50 Bruksanvisning

29 December 2024
Eldom

Eldom Atma NU40 Bruksanvisning

29 December 2024
Pingi

Pingi Cascada CHD-A4000D Bruksanvisning

28 December 2024
Pingi

Pingi Cascada CHD-A4000M Bruksanvisning

28 December 2024
Ionmax

Ionmax ION610 Bruksanvisning

27 December 2024
Sharper Image

Sharper Image Hygrometer Bruksanvisning

19 December 2024