Elektrobock Pocket Home PH-BP1-V Bruksanvisning

Elektrobock Golvvärme Pocket Home PH-BP1-V

Läs nedan 📖 manual på svenska för Elektrobock Pocket Home PH-BP1-V (8 sidor) i kategorin Golvvärme. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

• Element of the PocketHome® system

• Transmitter for the PH-BP1-P9 receiver

• Detects the room temperature and

sends requirement for circuit switching

DISPLAY DESCRIPTION: CONTROL ELEMENTS:

: used for selection of functions

: selection of preset temperatures

: information button (when pushed in the AUTO

mode, it gradually shows information on the

required temperature (PO:t), current hour/

temperature (CL:O/tE:P), operating hours

(SU:MA) and day (dE:n).

conﬁ rmation button (ENTER)

for selection of functions and temperature

setting

1, indication of the preset time and temperature

program

2, indication of the selected function AUTO, MANU,

PROG, etc.

3, indication of anti-freeze temperature (3°C)

4, indication of temperatures, comfortable ,

economical , party P

5, indication of time / temperature

Fce

The PH-BP1-V transmitter in connection with the 9-channel receiver PH-BP1-P9 is used for wireless

control of individual rooms (zone control) in a ﬂ oor heating system. There is no need to install any con-

necting cables between the receiver and transmitters (room thermostats)! The entire set can be included

in the PocketHome® system and all zones controlled from a single point by means of a central unit and/

or through a PC. In that case it is ﬁ rst necessary to activate the PH-BP1-V transmitter in the central unit

(see Putting in operation in the PocketHome® system)!

In objects which do not necessitate central control the assembly can also work autonomously without a

central unit. The PH-P1-P9 receiver can be controlled by means of up to 9 PH-BP1-V transmitters.

DESCRIPTION

INSTALLATION

1) The transmitter is easily portable, yet we recommend that it be located in a suitable place where its activity will not

be affected by direct ﬂ ow of hot air from a heater, solar radiation or other disturbing effects. Also avoid its

installation on an external wall.

2) Install the transmitter (indoors) as far as possible (at least 0.5 m) from big metal objects and from power lines to

avoid interference of signal reception!

3) We recommend that the installation be done by a person adequately qualiﬁ ed in electrical engineering!

4) To prevent interference and affection of systems, every system is protected by its unique factory-saved code!

5) For correct communication of all elements in the PocketHome® system with the PH-CJ37 / Plus central unit, the

code must be learned = every element ACTIVATED in the central unit!!!

6) As the entire system works at two-way radio frequency of 433.92 MHz, follow the installation and location

instructions!

! Caution:

LOCATION AND EXCHANGE OF BATTERIES

- Lift off the back part by pushing the latch at the arrow

and remove the protective paper from the batteries (at

ﬁ rst use); thus the transmitter becomes functional.

- Necessity to exchange the batteries is indicated by the

“ ” symbol ﬂ ashing on the display (this information Ba:tt

can also be directly obtained on the central unit or in the

PC program (see the PH-CJ37/Plus manual).

- Always use alkaline batteries 2 x 1.5 V type AA

Dispose of used batteries in conformity with

regulations for dealing with hazardous waste! 2

Pushing the Fce button and then the button, you can choose the following functions:

1. AUTO : thermostat works according to the preset program.

2. MANU : used for manual setting of temperature (selection with the P button or the

buttons; the temperature remains constant until the next change.

3. CL:O : current day and time setting.

4. PROG : programming mode.

5. PA:r : setting of parameters (constants).

6. OF:F : PH-BP1-V is switched off permanently in this mode (except for the “ “ mode ).

7. UA:dr : learning the unique number from the central unit / learning the code in the PH-BP1-P9 receiver

FUNCTIONS

Note: If no button is pushed within 2 minutes, the transmitter resumes the basic mode.

After long push, the button function speeds up.

PA:r1 options for data on the display

- Push the Fce button, chose the PA:r (parameters) function with the , conﬁ rm with i.

- PA:r1 appears on the display

- Conﬁ rm with the i and with the choose the option for displayed data in the basic

mode:

current temperature displayt

C current time display

- Conﬁ rm your choice by pushing the i button again.

PA:r2 economical temperature (17°C by default)

- PA:r2 appears on the display

- Conﬁ rm with the i button and set the economical temperature with the button; conﬁ rm

with the i button again.

1, Push the Fce button, chose the function with the button, conﬁ rm CL:O (clock)

with the i .

2, Time appears on the display and hour indication is ﬂ ashing; set the desired value with the

button and conﬁ rm with the i button. Minute indication starts ﬂ ashing; set the

desired value with the button and conﬁ rm with the i.button again. The day value

appears (d:1 Monday to d:7 Sunday); select the current day with the button and

conﬁ rm with the i button again.

TIME SETTING - CL:O FUNCTION current time and day

Produktspecifikationer

Varumärke:	Elektrobock
Kategori:	Golvvärme
Modell:	Pocket Home PH-BP1-V
Färg på produkten:	Blauw
Vikt:	170 g
Bredd:	110 mm
Djup:	110 mm
Höjd:	22 mm
AC-adapterfrekvens:	50/60 Hz
AC-adapterns inspänning:	100 - 240 V
Blåtand:	Ja
Processorfrekvens:	1.8 GHz
Processormodel:	S905X2
Antal processorkärnor:	4
Intern lagringskapacitet:	8 GB
Wi-Fi-standarder:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth-version:	4.2
Videoformat som stöds:	AVC, H.264, H.265, HEVC/H.265, MPEG4, VP9
Grafikadapter:	Mali-G31
Inkluderar operativsystem:	Android
Ethernet LAN:	Ja
Frekvensband:	2.4/5 GHz
Videolägen som stöds:	720p, 1080p, 2160p
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash)
Google-applikationer:	Google Chromecast, Google Play
Strömförbrukning (max):	7 W
Antal USB-anslutningar:	2
Bildförhållanden som stöds:	16:9
USB-version:	2.0/3.2 Gen 1 (3.1 Gen 1)
Maximal videoupplösning:	3840 x 2160 Pixels
HD typ:	4K Ultra HD
Internminne:	2 MB
Processorarkitektur:	Cortex-A53
Internminnestyp:	DDR4
Typ av lagringsmedia:	eMMC
Operativsystem version:	10
HDMI:	Ja
Video-appar:	Amazon Prime Video, Disney+, Netflix, YouTube
Förvaringstemperatur:	-10 - 70 °C
AV-utgång:	Ja
Processorfabrikant:	Amlogic
Dokumentformat som stöds:	HTML5
S/PDIF-utgång:	Ja
Wifi:	Ja
Drifttemperatur (TT):	0 - 40 °C