Elite Screens ezFrame R106H Bruksanvisning
Elite Screens
Projektionsduk
ezFrame R106H
Läs nedan 📖 manual på svenska för Elite Screens ezFrame R106H (3 sidor) i kategorin Projektionsduk. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/3
Insta- 2 Screen Series RP
Self Adhesive Rear Projecon Screen Film-
Installation Guide
PRECAUTIONS
1. This product is an adhesive rear-projecon screen that can be applied to various surfaces such
as transparent glass or acrylic.
2. This product is made for a one-me applicaon. It has a non-reusable adhesive that bonds
rmly to a window surface. If the window has any layer treatment such as nng, it is likely
that the layering will be damaged upon removal of the screen.
3. To ensure an even and “bubble free” installaon, make sure that the window surface is clean -
and evenly moistened previous to installaon.
4. Do not fold the Insta-RP2 Screen’s material. Folding will result in a permanent crease that
cannot be removed.
5. Avoid touching the screen with any hard or sharp objects that may cut, scratch or otherwise
deface the material.
6. The Insta- 2 Screen is applied to a moist surface. This can impact the installaon of the RP
material by possibly creang slight ripples or bubbling. These will disappear within the rst few
weeks as the micro-droplets of water trapped in the adhesive evaporate.
Contents of this package Pad
Please make sure that all parts listed below are included. Contact Elite Screens Immediately if anything is
missing.
a . b .
Parts List
QTY
a. 2 Insta-RP Screen Material
1
b. Microfiber cleaning cloth
1
Installation
1. Use a spray bole lled with water and a mild detergent (1:1000 rao column)
2. Thoroughly clean the glass surface using the correct glass cleaning equipment-
3. Make sure that the glass surface is smooth (unblemished) and perfectly at.
4. Cut the screen to t the required size of the product
5. Parally separate the lm from the screen’s adhesive backing.
(*Tip, it is easier to apply the screen while separang the lm from the adhesive at the same
me. This keeps the material from scking together or going on unevenly)
6. Spray applicators are ideal to evenly spread the moisture before aaching the screen material
to the glass.
7. Carefully smooth out the surface (preferably using latex gloves) to ensure that the screen is
level with no bubbles or ripples present.
8. Now that the material is perfectly at, make sure that it is properly aligned .
9. Use of a leveling brush or scraper will eliminate the residual moisture and make sure that the
material has been applied properly.
10. Allow material to stand unused for 2 to 3 hours to allow the adhesive to bond and set.
For a local Elite Screens contact or Technical Support, please visit
www.elitescreens.com
Produktspecifikationer
| Varumärke: | Elite Screens |
| Kategori: | Projektionsduk |
| Modell: | ezFrame R106H |
Behöver du hjälp?
Om du behöver hjälp med Elite Screens ezFrame R106H ställ en fråga nedan och andra användare kommer att svara dig
Projektionsduk Elite Screens Manualer
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
Projektionsduk Manualer
- Projektionsduk Draper
- Projektionsduk Pyle
- Projektionsduk GPX
- Projektionsduk Optoma
- Projektionsduk Da-Lite
- Projektionsduk AV:link
- Projektionsduk Projecta
- Projektionsduk Duronic
- Projektionsduk Celexon
- Projektionsduk Lumene
- Projektionsduk Stewart
- Projektionsduk Avers
- Projektionsduk Instaal
- Projektionsduk Elite ProAV
- Projektionsduk KHOMO GEAR
- Projektionsduk EPV
Nyaste Projektionsduk Manualer
11 Oktober 2024
6 Oktober 2024
2 Oktober 2024
29 September 2024
29 September 2024
27 September 2024
26 September 2024
25 September 2024
25 September 2024
25 September 2024