Emga 206015 Bruksanvisning
Emga
Blikopener
206015
Läs nedan 📖 manual på svenska för Emga 206015 (2 sidor) i kategorin Blikopener. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
206015 ma en 2017
CAN
OPENER
Instructions
Please read carefully & keep this card
Operating instructions
OPERATION
A. To obtain best results from your Can Opener please follow our operating,
cleaning and maintenance instructions.
NB: Badly damaged can rims should be straightened with pliers before
opening.
B. Affix platform securely to a firm work surface, using the screws provided.
C. Slide can opener tube through aperture in platform.
D. Position can on platform and, with handle in vertical position,
punch blade through lid.
E. Lower handle through 90° into turning position.
F. Open can by turning handle clockwise. Raise handle through 90°
to release and remove can.
206015 ma en 2017 2
CLEANING
A. Can openers should be cleaned on a regular basis, depending on the amount of use.
B. Clean with hot water and brush, Rinse with clean water. detergents or soap etc. can affect durability of painted and
plated surfaces.
C. Dry can opener thoroughly. Moving parts do not require lubrication, but blade and wheel contact surfaces may be
protected against corrosion with vegetable oil or Vaseline.
MAINTENANCE
BLADE - check for wear regularly, test cutting edge with fingernail for evidence of groove or nick.
WHEEL - check gear teeth for wear - opener will tend to slip if gear is worn.
PLATFORM - check that fixing is secure.
Check that can opener leans to left when viewed from operating position. If opener is vertical during operation,
platform is worn and opener will tend to slip, or will not open complete can in one operation.
REPLACEMENT OF WHEEL (Art No: 206.016)
1. Screw in long bolt on blade to raise blade from wheel.
2. Place spindle in position ‘O’ to hold wheel rm.
3. Turn handle in anti-clock-wise direction.
Then remove handle and worn wheel.
4. Place new wheel in position with teeth at the angle illustrated.
Place spindle in position ‘C’ and turn handle in a clockwise direction to tighten.
5. To adjust blade, screw out long bolt on blade so the blade clears the wheel.
REPLACEMENT OF BLADE (Art No: 400.016)
Produktspecifikationer
| Varumärke: | Emga |
| Kategori: | Blikopener |
| Modell: | 206015 |
Behöver du hjälp?
Om du behöver hjälp med Emga 206015 ställ en fråga nedan och andra användare kommer att svara dig
Blikopener Emga Manualer
18 September 2024
18 September 2024
Blikopener Manualer
- Blikopener Kenwood
- Blikopener Arendo
- Blikopener Severin
- Blikopener Black And Decker
- Blikopener Oster
- Blikopener Moulinex
- Blikopener Cuisinart
- Blikopener Hendi
- Blikopener Hamilton Beach
- Blikopener Rommelsbacher
- Blikopener Proctor Silex
- Blikopener Beautiful
- Blikopener Brentwood
Nyaste Blikopener Manualer
14 Oktober 2024
24 September 2024
24 September 2024
23 September 2024
21 September 2024
21 September 2024
21 September 2024
15 September 2024
3 September 2024
29 Augusti 2024