EMOS P5723 Bruksanvisning

EMOS Dörrklocka P5723

Läs nedan 📖 manual på svenska för EMOS P5723 (38 sidor) i kategorin Dörrklocka. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/38

3402107000_31-P5723_00_01_WEB 105 × 148 mm

P5723 | 98098

GB Wireless Doorchime

CZ Bezdrátový zvonek

SK Bezdrôtový zvonček

PL Dzwonek bezprzewodowy

HU Vezeték nélküli csengő

SI Brezžični zvonec

RS|HR|BA|ME Bežično zvono

DE Drahtlose Klingel

UA Бездротовий дзвоник

RO|MD Sonerie fără r

LT Belaidis durų skambutis

LV Bezvadu durvju zvans

EE Juhtmeta uksekell

BG Безжичен звънец

FR Carillon sans l

IT Campanello senza li

ES Timbre inalámbrico

NL Draadloze deurbel

www.emos.eu

GB | Wireless Doorchime

The set includes a push button (transmitter) and a home doorchime (receiver).

A transmission between the button and the door chime is performed by radio waves at frequency

of 433.92 MHz. Transmission range depends on local conditions and can be up to 100 m in an open

space without interference.

For a correct use of the wireless door chime, read the user manual carefully.

Specications

Transmission range: up to 100 m in open area (in built-up area may drop to fth)

Pairing of the door chime and the push button: “self-learning” function

Pairing capacity: max 8 buttons

Optical signalization of ringing on push button

Number of melodies: 36 melodies

Transmission Frequency: 433.92 MHz, 10 mW e.r.p. max.

Power of door chime unit: 3× 1.5 V AA

Power of pushbutton: Battery 1× 3 V (CR2032)

Included parts: double-sided adhesive tape, 2 screws

Description of the door chime and the buttons:

see Fig. 1

A – melody selection

B – battery compartment

see Fig. 2

1 – replacing of a battery inthe push button

2 – installation of the button

COMMISSIONING

Push button of the door chime (transmitter)

1. Using a screwdriver remove the back cover through the hole onthe side of the button. Insert 3 V

battery in to the button. Pay attention to the polarity of the inserted battery.

2. Attach the back cover that serves as a holder on a wall with two screws. It can also be attached

using double-sided adhesive tape. Check if the set operates reliably at a chosen place before instal-

lation. It is advisable to choose a protected position of the button, e.g. placing it in an embrasure.

3. Assemble the button by putting the front part on the back cover and snap it.

4. Write your name on the label under the transparent cover. Remove the cover by slight pulling.

Note: The push button of the door chime (transmitter) can be easily placed on wood or brick walls.

Never place the button directly on metal objects or materials that contain metal such as plastic con-

struction of windows and doors that contain metal frame. The transmitter may not function properly.

1 2

CR2032

Pairing of the push button and the door chime

1. Insert 3× 1.5 V AA batteries into the door chime, hear a melody, the door chime is ready forpair-

ing. Do not mix together old and new or dierent types of batteries (Alkaline, carbon-zinc and

nickel-cadmium), do not use rechargeable batteries!

2. Press the push button on the button (transmitter), hear a melody, the devices will be matched.

3. For pairing of other buttons, repeat step 2.

4. Pushbuttons can be matched within 30 seconds after inserting the battery.

5. If you want to pair another buttons later, follow step 1 and 2.

6. This allows you to progressively pair up to 8 buttons.

Erasing the memory of paired buttons

1. Remove the rear part of the push button cover.

2. Set the chime to the pairing mode – depending from the door chime type, remove the battery

and reinsert ordisconnect the chime from the 230 V socket and reconnect.

3. Within 30 seconds push the S2 button on the rear of the push button (transmitter).

4. A melody will sound – the memory of all matched buttons will be erased.

Melody choice

Using a suitable thin (not sharp) object such as a pencil, press the button A repeatedly.

Each time you will hear a dierent melody – the last played melody will be set.

The change of the melody can be done at any time when the doorbell is charged.

Note: The transmission range (max. 100 m) is inuenced by local conditions such as number of walls

through which the signal must pass through, metal door frames and other elements that aect

the transmission of radio signals (presence of other radio devices operating at a similar frequency,

e.g. wireless thermometers, door drivers etc.). The transmission range can rapidly decrease under

inuence of these factors.

Troubleshooting

The door chime does not ring

• Door chime may be outside its range.

• Adjust the distance between the push button and the home door chime; the range can be

aected by local conditions.

• Batteries in the push button can be discharged.

• Replace the battery paying attention to the polarity of the inserted battery.

• Door chime has no power.

Care and Maintenance

Wireless digital door chime is a sensitive electronic device therefore take the following precautions:

• Door chime (receiver) is designed for an indoor use in dry areas.

• Door chime must be located in an easily accessible area for easy handling and disconnection.

• Occasionally check the function of the door chime and change the battery. Use only a high quality

alkaline battery withprescribed parameters.

• If you do not use the door chime for a long time, remove the battery from the push button.

• Do not expose the push button and the door chime to excessive vibrations and shocks.

• Do not expose the push button and the door chime to excessive heat and direct sunlight or moisture.

• Use a soft, damp cloth with a little of detergent for cleaning, do not use aggressive cleaning

agents or solvents.

This device is not intended for use by a person (including children) whom a reduced physical, sense or

mental inability or a lack of experience and knowledge inhibits from a safe use of the device, if they

are not supervised or have not been instructed about the use of the device by a person responsible

for their safety. It is necessary to supervise children to ensure that they do not play with the device.

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact

local authorities for information about collection points. If the electronic devices would be

disposed on landll, dangerous substances may reach groundwater and subsequently food

chain, where it could aect human health.

Produktspecifikationer

Varumärke:	EMOS
Kategori:	Dörrklocka
Modell:	P5723

Behöver du hjälp?

Om du behöver hjälp med EMOS P5723 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Dörrklocka EMOS Manualer

EMOS P5712 Bruksanvisning

31 December 2025

EMOS P5733S Bruksanvisning

15 December 2024

EMOS P5729 Bruksanvisning

15 December 2024

EMOS P5728T Bruksanvisning

15 December 2024

EMOS P5729B Bruksanvisning

15 December 2024

EMOS P5705 Bruksanvisning

15 December 2024

EMOS P5750.2T Bruksanvisning

15 December 2024

EMOS P5730 Bruksanvisning

15 December 2024

EMOS P5760T Bruksanvisning

15 December 2024

EMOS P5733G Bruksanvisning

15 December 2024

Dörrklocka Manualer

Nyaste Dörrklocka Manualer

Lorex B861AJEB-E Bruksanvisning

8 Januari 2025

Ring Battery Doorbell Bruksanvisning

2 Januari 2025

Friedland Evo D3200 Bruksanvisning

31 December 2025

Vimar ELVOX K40965 Bruksanvisning

30 December 2025

Heidemann 70370 Bruksanvisning

30 December 2025

Heidemann 70613 Bruksanvisning

30 December 2025

Heidemann 70215 Bruksanvisning

30 December 2025

Heidemann 70832 Bruksanvisning

30 December 2025

Infiniton CMPT-TSH9B63N Bruksanvisning

29 December 2024

Ezviz HP3 Pro Bruksanvisning

28 December 2024