Energenie ENER009 Bruksanvisning
Läs nedan 📖 manual på svenska för Energenie ENER009 (1 sidor) i kategorin Elskena. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/1
Audio Visual – Automatic Standby Shutdown
OOOOperation (see pictureperation (see pictureperation (see pictureperation (see picture): ): ): ):
a. Plug your TV, DVD player, Power Amplifier into any of the 4
controlled sockets of the AV Standby Shutdown.
Plug any device requiring continuous power into the always
on socket.
b. Plug the AV Standby Shutdown into a mains wall socket
(ensure the wall socket is turned 0N).
c. Stick the IR signal receiver (1) on the front panel of your TV
(near to the infrared receiver window of the TV).
Power LearningPower LearningPower LearningPower Learning: : : :
After the appliances have been plugged in and mains switched on,
you will see the operation indicator light is flashing – if not press the
button on the device for 4 seconds at least until the light flashes.
Press the power button on any of your remote controllers and aim at
the infrared signal receiver until the indicator light stops flashing and
remains illuminated. The device is now in power learning mode
power learning modepower learning mode
power learning mode.
Place all your connected devices into Standby and wait for at least 30
seconds.
Then press the button on the device to end the learning cycle. The
light will turn off.
-
--
-To turn ON the Sockets
To turn ON the SocketsTo turn ON the Sockets
To turn ON the Sockets:
: :
:
Aim your TV remote at the sensor and the TV and press the power
button until the TV turns on. The light on the AV Standby Shutdown
will illuminate indicating all the controlled sockets are re-powered. *
-
--
-To tur
To turTo tur
To turn OFF
n OFFn OFF
n OFF
:
Press the power button on your TV remote control and your TV will go
into standby. After 1 minute, the AV Standby Shutdown will
automaticallyautomaticallyautomaticallyautomatically turn off the power to all the controlled sockets.
*
Note
: You may also press the button on the front of the AV Standby
Shutdown device to re-enable the controlled sockets.
SpecificationSpecificationSpecificationSpecification
Voltage: 240V~ 50Hz
Max .current: 13A
Max. load: 3kW
Colour: Black/White
Mains cable: 1.5m
Sensor cable: 1.3m
4 controlled sockets
1 always ON socket
Product code: ENER009
Power consumption in standby: <1W.
Potential energy saved per year: 0.018KWH *
20 hours (average standby time)* 365
days/year = 0 131.4KWH
Note
: The AV Standby Shutdown will retain its
memory after a loss of power.
If you wish to change the number of
connected appliances you will need to re-
program the device. Press the button on the
front of the device for 4 seconds to clear the
previously set power level.
The indicator light will start flashing ready.
Then repeat the power learning process.
Produktspecifikationer
| Varumärke: | Energenie |
| Kategori: | Elskena |
| Modell: | ENER009 |
Behöver du hjälp?
Om du behöver hjälp med Energenie ENER009 ställ en fråga nedan och andra användare kommer att svara dig
Elskena Energenie Manualer
20 Augusti 2024
13 Augusti 2024
30 Juli 2024
Elskena Manualer
- Elskena Apc
- Elskena Brennenstuhl
- Elskena Nedis
- Elskena Caliber
- Elskena Eminent
- Elskena Tripp Lite
- Elskena DataVideo
- Elskena Hama
- Elskena GoGEN
- Elskena Steren
- Elskena Ufesa
- Elskena Konig
- Elskena Eaton
- Elskena CyberPower
- Elskena Ewent
- Elskena HQ
- Elskena ATen
- Elskena Kindermann
- Elskena StarTech.com
- Elskena Oregon Scientific
- Elskena Kopp
- Elskena Furman
- Elskena Legrand
- Elskena Panduit
- Elskena V7
- Elskena Bachmann
- Elskena Kondator
- Elskena Geist
- Elskena Bauhn
- Elskena Adam Hall
- Elskena Panamax
- Elskena Altronix
- Elskena Middle Atlantic
- Elskena Tecnoware
Nyaste Elskena Manualer
15 Oktober 2024
15 Oktober 2024
1 Oktober 2024
30 September 2024
29 September 2024
26 September 2024
26 September 2024
26 September 2024
24 September 2024
23 September 2024