Enttec Pixie Driver 24V Bruksanvisning

Enttec Lättnad Pixie Driver 24V

Läs nedan 📖 manual på svenska för Enttec Pixie Driver 24V (8 sidor) i kategorin Lättnad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
Pixie User Manual
50478 (H)
For more information visit:
www.enttec.com/pixie
November 17 ID: 1 24
PIXIE DRIVER
Box Contents
• Pixie Driver
(PN: 73540, 73541, 73542, 73543, 73547 or 73548)
• User manual ( 50478)PN:
LED Protocols Supported
• 9PDOT-8bit
• WS2811
• WS2812 and WS2813 (use WS2812)
• WS2812B
• APA-104 LEDs
• SK6812 – use WS2812B
• TM1804 – use WS2811
• TM1812 – use WS2812B
Note:
▪ If you happen to find led protocols that work, and
which not listed, please let us know, so we can is
update our documentation
Physical Dimensions
The unit is designed to t the modular rack accessory (sold
separately) which allows stacking up to 8 units in a standard
19” rack using 3 standard rack mount units (3RU).
Pixie User Manual
50478 (H)
For more information visit:
www.enttec.com/pixie
November 17 ID: 2 24
Features
• Drives 2 DMX universes worth of 5 Volt Pixel
Tape/Dots or 12/24V Pixel Tape/Dots (model
dependent).
• In-Built 5V DC power supply with 55 and 110 watts
output power units available (pn: 73541 and
73540)
• In-Built 12V DC power supply with 65 and 130
watts output power units available (pn: 73542 and
73543)
• In-Built 24V DC power supply with 65 and 130
watts output power units available (pn: 73547 and
73548)
• Enhanced data outputs with surge protections
• D3 is a duplicated output of D1 for backup
• D4 is a duplicated output of D2 for backup
• 55W and 65W drivers can individually control and
power up to 300 RGB pixel LEDs
• 110W and 130W drivers can individually control
and power up to 600 RGB pixel LEDs
• Smart thermal management
• DMX512 Controllable and USB congurable
• Supports RGB and RGBW pixel tape
• Quick 2 steps test installation: connect your pixel
strips to the screw terminal output and plug
mains cable to a wall outlet. It is that easy!
• Standalone test output sequences (no external
data required)
• Show record and playback (Art-Net to USB using
PRO-Manager App)
• Power and output status LED indicators
• High quality powder coated metal box
• Scalable design for large projects
• Up to 8 units stackable using standard 19”
modular rack accessory (sold separately)
• Standard IEC mains and 5Pin-XLR DMX input
connectors
• Plug-unplug screw terminal output connector
• Automatic multi voltage mains input (110-250V
AC)
Safety
• This unit is intended for indoor use only
• Do not expose the Pixie Driver to rain or moisture,
doing this will void the warranty
• Make all the connections before you plug in the
mains power
• Do not remove the cover, there are no serviceable
parts inside
• Never plug this unit into a dimmer pack
• Always be sure to mount this unit in an area that will
allow proper ventilation. Allow about 6” (20 cm)
between this device and a wall
• Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, pay particular
attention to the point they exit from the unit
Start-Up Demo Installation
The Pixie Driver comes loaded with a scrolling rainbow
demo sequence which will run and loop every time you
power the unit up so you can get your installation tested
straight away once you connect your LED pixel strips.
When any valid data is fed through the DMX or USB ports it
will override the demo playback sequence and keep listen-
ing to the data ports until you re-power the unit.
If you do not want the Pixie driver to generate any output
when powered up, it can be done by erasing the pre-loaded
show or overwriting it with your own as further described in
the ENTTEC PRO Manager software section.
Pixie User Manual
50478 (H)
For more information visit:
www.enttec.com/pixie
November 17 ID: 3 24
Power Budgeting
This section explains how many Dots or LEDs can be con-
nected to the unit. Please note that the 55W and 65W
models have only one power supply (VCC) and the VCC0
output will not be available.
Warning: (VCC and VCC0) cannot be connected in parallel.
Pixel Strips and Pixel Tile
The strips/tile supported by the Pixie driver are based on
the WS2811, WS2812 and WS2812B protocol.
The following table shows the maximum number of LEDs
that the driver can power when driven to the max. (RGB
channels on 100% or white).
300 RGB LEDs can be substituted for 240 RGBW LEDs in
the above table.
Pixel Dots
The dots supported by the Pixie driver are based on the
9PDOT-8bit protocol.
Any Pixie driver can process 1024 DMX channels, but the
output will be limited by the Wattage However, since .
Pixel Dots have much higher light output compared to Pixel
strip, this leads to the higher power consumption.
This limits the number of dots that a driver can control, and
can be calculated by: dividing the total output of driver with
the output of each dot. For example:
This calculation can also be used to calculate how many
Pixie drivers will suit your application when one driver is not
enough.
Warning Overloading: the outputs could cause the driver
and the connected strips to malfunction or icker.
Status LED
The Pixie driver comes with two LED indicators located in
the front panel.
The orange LED indicates that the internal power supply is
working properly and the unit is ready to operate and sup-
ply power to the strips. If the LED is OFF and you have al-
ready connected the mains cable to a working wall outlet, it
means that there is a problem in the unit. In such case
please contact ENTTEC support.
The green LED indicates the Pixie status and should be con-
stantly ashing. Please refer to the following table for infor-
mation about current operating status:
Flashing Frequency
Unit Status
Constant on
Overheating/Error
0.5 Hz
Unit is running normally
2 Hz
Show is playing
8 Hz
Receiving data from DMX
25 Hz
Receiving data from USB
Power
Source
73541(55W)
73540(110W)
300 RGB LEDs/2 Tiles
300 RGB LEDs/2 Tiles
Unused
300 RGB LEDs/2 Tiles
300 RGB LEDs/2 Tiles
600 RGB LEDs/4 Tiles
Item
Value
Pixel Dot
9PDOT5 rated at 0. w/dot72
Pixie Driver
73543 12V 130w
Max quantity
130w/0.72w= 180 dots

Produktspecifikationer

Varumärke: Enttec
Kategori: Lättnad
Modell: Pixie Driver 24V

Behöver du hjälp?

Om du behöver hjälp med Enttec Pixie Driver 24V ställ en fråga nedan och andra användare kommer att svara dig


Lättnad Enttec Manualer

Enttec

Enttec ODE Mk2 Bruksanvisning

23 September 2024
Enttec

Enttec DIN RDS4 Bruksanvisning

23 September 2024
Enttec

Enttec DMX USB Pro Bruksanvisning

23 September 2024
Enttec

Enttec DMXIS Bruksanvisning

23 September 2024
Enttec

Enttec Pixie Driver 5V Bruksanvisning

23 September 2024
Enttec

Enttec Pixie Driver 24V Bruksanvisning

23 September 2024
Enttec

Enttec Octo Mk2 Bruksanvisning

23 September 2024
Enttec

Enttec Pixie Driver 12V Bruksanvisning

23 September 2024
Enttec

Enttec Storm 10 Bruksanvisning

23 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer

Ansmann

Ansmann FL4500AC Bruksanvisning

27 Oktober 2024
Brennenstuhl

Brennenstuhl 1171250801 Bruksanvisning

27 Oktober 2024
Steinel

Steinel FRS 30 Bruksanvisning

27 Oktober 2024
Stairville

Stairville DMX Invader 2420 MK II Bruksanvisning

27 Oktober 2024
Aqara

Aqara LED Light Bulb (Tunable White) Bruksanvisning

26 Oktober 2024
V-Tac

V-Tac VT-7959 Bruksanvisning

26 Oktober 2024
Quoizel

Quoizel Latitude LTT1628EK Bruksanvisning

26 Oktober 2024
Elan

Elan Osk 83765 Bruksanvisning

25 Oktober 2024
ET2

ET2 Centrum E23312-24PC Bruksanvisning

23 Oktober 2024
ET2

ET2 Blossom E32797-93BK Bruksanvisning

23 Oktober 2024