EtiamPro LQC1B-V1 Bruksanvisning

EtiamPro Dimmer LQC1B-V1

Läs nedan 📖 manual på svenska för EtiamPro LQC1B-V1 (4 sidor) i kategorin Dimmer. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

LQC1B-V1 Single channel

EASY DIMMER

Data Sheet FW 3.0+

Rev. 2018-01-22

pag. 1/4

FEATURES

• FADER+DIMMER+DRIVER

• DC Input: 12/24/48 Vdc

• Command: N.O. push button

• Adjusting the brightness of white light

• Current outputs or voltage outputs for R-L-C loads

• Typical efficiency > 95%

• Adjusting the brightness up to completed off

• Soft start and soft stop

• Optimized output curve

• Extended temperature range

• 100% Functional test - 5 Years warranty

Constant voltage variants (common anode)

CODE Supply voltage Output Channel Command

LQC1B-V1 12-48V DC 1 x 8A max 1 N.O. push button

Application: Dimmer

Protections

OTP Over temperature protection

OVP Over voltage protection (*)

UVP Under voltage protection (*)

RVP Reverse polarity protection (*)

IFP Input fuse protection (*)

SCP Short circuit protection

OCP Open circuit protection

CLP Current limit protection

(*) Only control logic protection

LED DRIVERS

LQC1B-V1 Single channel

EASY DIMMER

Data Sheet FW 3.0+

Rev. 2018-01-22

pag. 2/4

Reference standards

EN 61347-1:2008 +A1:2011+A2:2013 Lamp controlgear - Part 1: General and safety requirements

EN 55015:2013+A1:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting

and similar equipment

EN 61547:2009 Equipment for general lighting purposes - EMC immunity requirements

EN 50581:2012 Technical documentation for the assessment of electrical and electronic products with respect

to the restriction of hazardous substances

Technical Specifications

Variants

Constant Voltage

Supply voltage min: 10,8 Vdc .. max: 52,8 Vdc

Input current max 8 A peak

Output voltage = Vin

Output current max 8 A peak

max 7,5A @20°C 1)

max 6,5A @40°C 1)

Nominal power 1) @12V 78 W

@24V 156 W

@48V 312 W

Thermal shutdown 150 °C

D-PWM dimming frequency 250Hz

D-PWM resolution 16 bit

D-PWM range 1 – 100 %

Storage Temperature min: -40 max: +60 °C

Ambient Temperature 1) min: -10 max: +40 °C

Protection grade IP20

Wiring 2.5mm² solid - 1.5mm² stranded - 30/12 AWG

Mechanical dimensions 45 x 58 x 25 mm

Packaging dimensions 68 x 56 x 35 mm

Weight 40g

1) maximum value, dependent on ventilation conditions

LED DRIVERS

LQC1B-V1 Single channel

EASY DIMMER

Data Sheet FW 3.0+

Rev. 2018-01-22

pag. 3/4

Installation

Connect the switching supply (12-48V), connect the N.O. push button (to 5 or 0V, with/without memory), connect leds.

Configuration

N.O. PUSH BUTTON

1- Memory function: the device stores its state in case of blackout (if N.O. push buttons connected to 5V).

2- Eco function: when recovering the power supply the device starts-up from a switched off condition (if N.O. push buttons connected to 0V).

3- Preset function: when recovering the power supply the device starts-up from a previously set condition. The preset can be stored by

connecting N.O. push buttons to 5V during installation (and to 0V after installation).

LED DRIVERS

Produktspecifikationer

Varumärke:	EtiamPro
Kategori:	Dimmer
Modell:	LQC1B-V1
Typ av operation:	Touch
Färg på produkten:	Zwart
Bredd:	310 mm
Djup:	310 mm
Höjd:	18.8 mm
Snäll:	Elektronische weegschaal
Automatisk avstängning:	Ja
Beeldscherm:	LCD
Typ av strömkälla:	Batterij/Accu
Noggrannhet:	100 g
Maximal viktkapacitet:	150 kg
Form:	Vierkant
Antal per paket:	1 stuk(s)
Måttenhet:	kg, lb, st
Minnesfunktion:	Ja
Kroppsfettanalys:	Ja
Andel kroppsvatten:	Ja
Benmassaanalys:	Ja
Muskelmassaanalys:	Ja
Antal minnesposter:	8
Minsta viktkapacitet:	5 kg
Batterier-ingår:	Ja
Skärmstorlek (skärm):	62.5 x 62 mm