Extech MN24 Bruksanvisning

Läs nedan 📖 manual på svenska för Extech MN24 (10 sidor) i kategorin Multimeter. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
User’s Manual
MiniTecTM Series MultiMeter
Model MN24
2 MN24-en-US_V2.2 07/15
Introduction
Congratulations on your purchase of Extech’s MN24 Multimeter. This meter
measures AC/DC Voltage, DC Current, Resistance, Battery Voltage, Diode
Voltage and Continuity. This professional meter is shipped fully tested and
calibrated and, with proper care, will provide years of safe reliable service.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user
must refer to the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use,
hazardous voltages may be present
Safety Precautions
1. Improper use of this meter can cause damage, shock, injury or death. Read
and understand this user manual before operating the meter.
2. Make sure any covers or battery doors are properly closed and secured.
3. Always remove the test leads before replacing the battery or fuses.
4. Inspect the condition of the test leads and the meter itself for any damage
before operating the meter. Repair any damage before use.
5. Do not exceed the maximum rated input limits.
6. Use great care when making measurements if the voltages are greater than
25VAC rms or 35VDC. These voltages are considered a shock hazard.
7. Always discharge capacitors and remove power from the device under test
before performing Diode, Resistance or Continuity tests.
8. Remove the battery from the meter if the meter is to be stored for long
periods.
9. Voltage checks on electrical outlets can be difficult and misleading because
of the uncertainty of connection to the electrical contacts. Other means
should be used to ensure that the terminals are not "live".
3 MN24-en-US_V2.2 07/15
1
2
3
4
5
Description
1. LCD Display
2. Function switch
3. COM jack
4. 10A jack
5. Positive jack
Note: Tilt stand, fuse, and battery compartment are located on the rear of the unit
Symbols
•))) Continuity
Diode test
micro (amps)
m milli ( volts, amps)
k kilo (ohms)
 ohms
VDC volts direct current
VAC volts alternating current
ADC amps direct current
BAT Low battery

Produktspecifikationer

Varumärke: Extech
Kategori: Multimeter
Modell: MN24

Behöver du hjälp?

Om du behöver hjälp med Extech MN24 ställ en fråga nedan och andra användare kommer att svara dig




Multimeter Extech Manualer

Extech

Extech 380942 Bruksanvisning

23 December 2024
Extech

Extech DM220 Bruksanvisning

19 September 2024
Extech

Extech MA440 Bruksanvisning

16 September 2024
Extech

Extech EX355 Bruksanvisning

16 September 2024
Extech

Extech EX623 Bruksanvisning

16 September 2024
Extech

Extech MA443 Bruksanvisning

16 September 2024
Extech

Extech MG302 Bruksanvisning

11 September 2024
Extech

Extech Ex 830 Bruksanvisning

6 September 2024
Extech

Extech Ex 810 Bruksanvisning

3 September 2024
Extech

Extech EX 710 Bruksanvisning

2 September 2024

Multimeter Manualer

Nyaste Multimeter Manualer