Felisatti RHF45 Bruksanvisning

Felisatti Borrmaskin RHF45

Läs nedan 📖 manual på svenska för Felisatti RHF45 (25 sidor) i kategorin Borrmaskin. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/25

Fig.1 J

Fig.2

Fig.4

Fig.3

TECHNICAL DATA

Electro-pneumatic rotary hammer RHF45/1000VET RHF50/1200VERT

Rated power W 1005 1200

No load speed rpm 210-325 210-325

Hammer rate under load /min 1400-2400 1600-2700

Impact energy J 1-8.5 1-14

Chisel adjustment º 12



30 1230

dapto

SDS - max 45 SDS - max 45

Max.drilling capac. in concrete mm 12-45 12-50

Max.drilling capac. with hollow bit mm 40-100 40-125

Máx.drilling capac. with solid bit mm 19-38 19-40

pprox. weight (without accessories) kg 7 7.6

The instructions contained in this manual must be strictly

followed, it should be carefully read and kept close at

hand to use when carrying out maintenance on the

indicated parts.

If the machine is used carefully and normal maintenance

is carried out, it will work for a long time.

The functions and use of the tool you have bought shall

be only those described in this manual. Any other use

of the tool is strictly forbidden.

ILUSTRATIONS

DESCRIPTION (See figures)

A Dustproof hood (Fig.1)

B Bit holder ring (Fig.1 and 4)

C Auxiliary handle (Fig.1 and 3)

D Unlocking button (Fig.2)

E Mode selection switch (Fig.1 and 2)

F Air vents (Fig.1)

G Brush covers (Fig.1)

H Speed adjustment switch (Fig.1)

I On/Off switch (Fig.1)

J Clamp collar (Fig.1)

K Clamp unit (Fig.1)

SAFETY INSTRUCTIONS

 See “Safety instructions” enclosed manual, supplied

together with this instruction manual.

 Warning! When drilling in amianthus/asbestos and/or

silica stone, the dust produced is extremely harmful to

your health. Wear protection against inhalation of this

dust, in compliance with current regulations on accident

prevention. Follow the insurance company’s safety in-

structions regarding the responsibility of employees.

 For your personal safety, always connect the machine

to a mains supply by a differential and thermal cut-out

switch, in accordance with regulations on low-voltage

wiring sitemaps.

 Do not perforate the machine casing, as this would

destroy the protective insulation (use adhesive labels).

 Always unplug the machine before doing any work on it.

 Warning! Before each use, inspect the plug and lead.

Should they need replacing, have this done by an offi-

cial service centre. Only plug the machine in when it is

switched off.

 Always keep the lead out of the machine’s working area.

 Only plug the machine in when it is switched off.

 Do not allow the machine to get wet, nor should it be

used in wet environments.

 When using the machine, always wear safety goggles,

gloves and non-slip footwear, and it is advisable to

wear ear protection.

 Do not touch the bit when during or immediately

after working, as it becomes very hot and can

cause serious burns.

 Hold the machine firmly by the handle and the auxiliary

handle, otherwise the recoil produced could cause the

machine to work imprecisely or even dangerously.

 Always use the auxiliary handle.

 Never attempt to clean off dust or shavings resulting

from drilling when the machine is operating.

 Do not use diamond core bits.

 When drilling walls, ceilings or floors, take care to

avoid electric wires and gas or water pipes.

BRIEF DESCRIPTION

A pneumatic percussion unit generates the power nec-

essary for hammer drilling or chiselling on masonry.

Just when we hit a conventional chisel with a hammer, a

free piston strikes the bit or chisel, which can move

lengthways, through an intermediate part. This free

piston is driven by a second piston activated by an

electric motor through an air cushion. This electro-

pneumatic principle offers great percussion elasticity and

work free from recoil.

Unlike a normal hammer drill, the drilling capacity does

not depend on the pressure exerted on the machine.

Use of the machine:

RHF models can be used for percussion drilling and

chiselling in stone.

Any use differing from the above mentioned is strictly

forbidden.

Additional features of the electro-pneumatic hammer:

- The machine is equipped with a safety clutch or mecha-

nism, which operates when a bit seizes up, protecting

the user and the machine’s electro-mechanical parts.

The clutch is released automatically.

- Warning! This machine must not be used with hole

saws, core bits, diamond bits, etc., as they tend to jam

in the hole easily. This would cause the safety clutch to

trip out too often.

- Toolholder B for hammer drilling with SDS-max

mount for using tools with SDS-max shanks.

- Electronic speed control of the axle H enables us to: use

smaller bits with no danger of them breaking, drill light

Produktspecifikationer

Varumärke:	Felisatti
Kategori:	Borrmaskin
Modell:	RHF45
Bredd:	305 mm
Djup:	244 mm
Blåtand:	Nee
Ethernet LAN:	Ja
Maximal upplösning:	4096 x 2160 Pixels
Medföljande kablar:	SATA
Antal USB 2.0-portar:	2
Antal HDMI-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
HDMI-version:	2.0b
DVI-D-portar:	1
Digitalt ljud, optisk utgång:	1
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Processoruttag:	Socket AM4
Processorfabrikant:	AMD
Maximalt internminne:	128 GB
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ C:	1
Ljudutgångskanaler:	7.1 kanalen
Ethernet-gränssnittstyp:	Gigabit Ethernet
Chipset moderkort:	AMD B550
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ A:	1
Typ av minnesplats:	DIMM
Ljudchip:	Realtek ALC897
Medföljande drivrutiner:	Ja
S/PDIF-utgång:	Ja
Minneskanal:	Dubbelkanaals
Gränssnitt för lagringsenheter som stöds:	SATA III
PS/2-port(ar):	1
Komponent för:	PC
LAN-kontroller:	Realtek RTL8111H
Typer av RAID:	0, 1,10
Maximalt minne grafikadapter:	16000 MB
Antal SATA III-kontakter:	6
Icke-ECC:	Ja
Kompatibla processorer:	AMD Ryzen 3 3rd Gen, AMD Ryzen 5 3rd Gen, AMD Ryzen 7 3rd Gen, AMD Ryzen 9 3rd Gen
Minnestyper som stöds:	DDR4-SDRAM
Max. antal SMP-processorer:	1
Wifi:	Nee
Moderkort chipset familj:	AMD
Moderkorts formfaktor:	ATX
Antal minnesplatser:	4
Minnesklockhastigheter som stöds:	1866,2133,2400,2667,2800,2933,3000,3066,3200,3466,3600,3733,3866,4000,4133,4266,4400 MHz
BIOS-typ:	UEFI AMI
BIOS-minnesstorlek:	256 Mbit
Anslutning för CPU-kylare:	Ja
Anslutningar för husfläktar:	2
ATX-strömkontakt (24-stift):	Ja
USB 2.0-anslutningar:	2
Anslutning för ljudpanel på framsidan:	Ja
Obuffrat minne:	Ja
USB 3.2 Gen 1 (3.1 Gen 1) anslutningar:	2
Chassiintrångsanslutning:	Ja
Rensa CMOS-bygel:	Ja
Antal M.2 (M) platser:	1
12V strömkontakt:	Ja
RGB LED anslutningsskena:	Ja