Fieldmann FDAK 201101-E Bruksanvisning

Fieldmann Kompressor FDAK 201101-E

Läs nedan 📖 manual på svenska för Fieldmann FDAK 201101-E (6 sidor) i kategorin Kompressor. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
Air compressor
Part list
1. ON/OFF Switch
2. Carrying handle
3. Accessory compartment
4. Mains plug
5. Compressed air hose
6. Stand
7. Manometer with gun
8. Release valve
9. Compressed air connector
10.Hose with level quick coupler
11.Trigger
12.Adapter nozzle
13.Adapter nozzle
14.Adapter nozzle
15.Extension nozzle
16.Universal adapter
17.Universal adapter
18.Nozzle adapter for the nozzle set
19.Ball needle
20.Valve adapter
Operation
Note:
The appliance vibrates during operation. Therefore always put it down
during operation. There are four feet (6) on the bottom of the appliance
for this purpose.
Remove the required accessories from the accessory compartment (3).
Switching on and off
Switching the appliance on:
Move the ON/OFF switch into the position “I” to switch the appliance
on. The integrated control lamp lights up.
Switching the appliance off:
Move the ON/OFF switch (1) into the position “O” to switch the appliance
off. The integrated control lamp goes out.
Compressed air hose with quick coupler (5) Connecting:
Compressed air hose with quick coupler (5) Connecting:
Compressed air hose with quick coupler (5) Connecting:
Compressed air hose with quick coupler (5) Connecting: Compressed air hose with quick coupler (5) Connecting:
Push the compressed air connector (9) into the quick couple of the
compressed air hose (5),the sleeve automatically springs forwards.
Cutting:
Cutting:
Cutting:
Cutting: Cutting:
Pull back the sleeve on the quick coupler of the compressed air hose (5)
and remove the compressed air connector(9).
Caution!
Caution!
Caution!
Caution! Caution!
When disconnecting the quick coupler of the compressed air hose (5),
Hold the coupler firmly to prevent injuries caused by the hose flying off.
Area of use:
Area of use:
Area of use:
Area of use: Area of use:
This application allows for a simple and accurate inflation of car tires.
The manometer (7) is used to check the tire pressure.
Insert the mains plug (4) of the compressor a mains power socket.
Switch the ON/OFF switch (1) to “I”. The integrated control lamp lights
up.
Read the air pressure from the manometer (7).
Switch the ON/OFF switch (1) to “O” as soon as the correct of permissible
air pressure has been reached.
Press down the lever quick coupler (10) and pull it off the valve.
Remove the mains plug (4) from the mains power socket.
Using the valve adapter
Sclaverand valve, race valve
Dunlop valve, bicycle valve
Area of use:
The valve adapter (20) facilitates easy inflation of bicycle tires.
Use the valve adapter (20) to pump to the valves shown above.
Connect the valve adapter (20) into the lever quick coupler (10) and then
release it.
Start by pressing the valve adapter onto the valve.
Inflate as described above.
Using the ball needle (19)/universal adapters (16)(17) can be used to
inflate air mattresses or similar.

Produktspecifikationer

Varumärke: Fieldmann
Kategori: Kompressor
Modell: FDAK 201101-E

Behöver du hjälp?

Om du behöver hjälp med Fieldmann FDAK 201101-E ställ en fråga nedan och andra användare kommer att svara dig




Kompressor Fieldmann Manualer

Kompressor Manualer

Nyaste Kompressor Manualer