Flashforge Adventurer 3 Pro 4 Bruksanvisning
Flashforge
3D-skrivare
Adventurer 3 Pro 4
Läs nedan 📖 manual på svenska för Flashforge Adventurer 3 Pro 4 (52 sidor) i kategorin 3D-skrivare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/52
用户使用手册
Adventurer 4 Series / 冒险家4 系列
User Guide
EN/CN-A01
中文P28
本手册仅适用于闪铸科技 冒险家4 系列 3D打印机
This guide is only applicable to FLASHFORGE Adventurer 4 Series 3D printer
Content
Notice
Reference
Chapter 1 Adventurer 4 Series
1.1 - Component Introduction
1.2 - Packing Specification
Chapter 2 Introduction of User Interface
2.1 - Build
2.2 - Prepare
2.2.1 - Preheat
2.2.2 - Filament
2.3 - Settings
2.4 - Maintain
2.4.1 - Upgrade
2.4.2 - Log
2.4.3 - Calibration
2.4.4 - ChangeExtruder
2.4.5 - Maintain
Chapter 3 Software Installation
Chapter 4 Preparation of Device
Chapter 5 Print
Chapter 6 Q&A
Chapter 7 Support and Service
02
05
06
06
07
08
08
10
10
11
12
13
13
13
14
15
15
16
16
17
21
27
01
Notice
Safety Notice: please read and strictly follow all the
safety warnings and notice below.
Work Environment Safety
Keep your work place tidy.
Do not operate device in the presence of flammable liquids, gases or dust,
which will cause fire in the high temperature generated by the equipment.
Keep device out of children and untrained people’s reach.
Electrical Safety
Always use the device with a properly grounded outlet. Do not refit device plug.
Ungrounded / improperly grounded / refitted device plugs will increase the risk of
leakage of electricity.
Do not use device in damp environment or under the burning sun. Damp
environment will increase the risk of leakage / exposure to the sun will accelerate
the aging of plastic parts.
To avoid device damage, please use the power supply provided by Flashforge.
Avoid using the device during a thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.
When grounding, plug the power cord into the three-in-one socket and connect to
the external grounding wire through the grounding terminal of the three-in-one
socket.
Check and replace the fuse: To prevent electric shock, please be sure to turn off the
power switch and unplug the power cord before checking or replacing the fuse.
Replace the fuse: Open the fuse box of the three-in-one socket and replace the
fuse with the fuse of 5*20, T10AL250V specification.
Note： Every printer has been tested before leaving factory. It is normal and will not
be of trouble if there are filament residue remaining in the extruder or slight
scratches on the plate.
02
Produktspecifikationer
| Varumärke: | Flashforge |
| Kategori: | 3D-skrivare |
| Modell: | Adventurer 3 Pro 4 |
Behöver du hjälp?
Om du behöver hjälp med Flashforge Adventurer 3 Pro 4 ställ en fråga nedan och andra användare kommer att svara dig
3D-skrivare Flashforge Manualer
27 September 2024
21 September 2024
14 September 2024
22 Augusti 2024
3D-skrivare Manualer
- 3D-skrivare Anker
- 3D-skrivare Renkforce
- 3D-skrivare Kodak
- 3D-skrivare Velleman
- 3D-skrivare BQ
- 3D-skrivare Monoprice
- 3D-skrivare XYZprinting
- 3D-skrivare MakerBot
- 3D-skrivare Weistek
- 3D-skrivare Anycubic
- 3D-skrivare German RepRap
- 3D-skrivare Wanhao
- 3D-skrivare Easy Threed
- 3D-skrivare LulzBot
- 3D-skrivare SINDOH
- 3D-skrivare PP3DP
- 3D-skrivare Wasp
- 3D-skrivare 3D Systems
- 3D-skrivare Creality
- 3D-skrivare Raise3D
- 3D-skrivare Craftbot
Nyaste 3D-skrivare Manualer
25 September 2024
25 September 2024
23 September 2024
23 September 2024
23 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024