FlinQ FQC8153 Bruksanvisning

FlinQ Diverse FQC8153

Läs nedan 📖 manual på svenska för FlinQ FQC8153 (13 sidor) i kategorin Diverse. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
FLINQ AIRCO WINDOW VELCRO KIT
FQC-8153
USER MANUAL
V1
FEATURES:
Universal use for all portable air conditioners and FlinQ Airco models
Increases cooling performance
Suitable for all common window types not measured more than 400cm around the outside
(not suitable for moving / sliding doors and windows)
Velcro Tape: 810cm
Window Seal: 400cm total length
Easy and quick installation by the Velcro tape, no drilling needed
Will keep the heat outside and the cooling inside
Window can still be opened and closed
Energy saving & eco friendly
Easy to clean and washable at 40 degrees (easy-care program)
100% UV-proof and rainproof
100% polyester material
Also suitable for air / tumble / dehumidify dryers with air hose
Keeps the rain, mosquitoes and other bugs outside!
Safe to use for cats as they cannot be stucked between the window anymore!
PREPARATIONS:
Measure the total length A, B and C of your window and see if it fits properly before use!
If so, open up the window and clean all the sides where the Velcro needs to be attached. Use a
degreaser or fat cleaner to wipe off all dust and fat before adding the Velcro tape.
INSTALLATION INSTRUCTIONS:
1. Mark the middle (M) of the window seal (Pic. 1).
PICTURE 1:
2. Mark the middle of the window frame and the casement (Pic. 2-4) (Picture 2 shows an open
window, Picture 3 a tilted window and Picture 4 an open skylight).
PICTURE 2, 3 and 4:
NOTE: First try to test the correct position with the window seal and see if it can fit properly by hand
first. Make sure the window can still be closed fully and check if the Velcro tape will not damage the
window frames!
3. Stick the Velcro tape to the front side (around one 1 cm wide) of the casement or to the inner
surface of the casement (where the window handle is attached).
4. First fasten side A with the zipper still closed, then side B, starting in the middle and working all the
way to the left and right or up and down.
5. IMPORTANT! When fastening, point A must be exactly the opposite of point B.
6. When closing the window take care that the seal is not jammed between the casement and window
frame.
7. Open the zipper at the positions marked with “S” and attach the exhaust airhose and close the
zipper as tight as possible.
8. Ready to use!

Produktspecifikationer

Varumärke: FlinQ
Kategori: Diverse
Modell: FQC8153

Behöver du hjälp?

Om du behöver hjälp med FlinQ FQC8153 ställ en fråga nedan och andra användare kommer att svara dig




Diverse FlinQ Manualer

Diverse Manualer

Nyaste Diverse Manualer