Fluke 115C Bruksanvisning

Fluke Multimeter 115C

Läs nedan 📖 manual på svenska för Fluke 115C (26 sidor) i kategorin Multimeter. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/26

PN 2538695

July 2006, Rev. 1, 2/07

All product names are trademarks of their respective companies.

115C and 117C

True-rms Multimeters

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for three

years from the date of purchase. This warranty does not cover fuses, disposable bat-

teries, or damage from accident, neglect, misuse, alteration, contamination, or abnor-

mal conditions of operation or handling. Resellers are not authorized to extend any

other warranty on Fluke’s behalf. To obtain service during the warranty period, contact

your nearest Fluke authorized service center to obtain return authorization information,

then send the product to that Service Center with a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS

FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE

IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since

some states or countries do not allow the exclusion or limitation of an implied warranty

or of incidental or consequential damages, this limitation of liability may not apply to

you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

11/99

True-rms Multimeters

Introduction

The Fluke Model 115C, and Model 117C are battery-

powered, true-rms multimeters (hereafter "the Meter")

with a 6000-count display and a bar graph. This manual

applies to both models. All figures show the Model

117C.

These meters meet CAT III IEC 61010-1 2nd Edition

standards. The IEC 61010-1 2nd Edition safety standard

defines four measurement categories (CAT I to IV)

based on the magnitude of danger from transient

impulses. CAT III meters are designed to protect

against transients in fixed-equipment installations at the

distribution level.

Contacting Fluke

To contact Fluke, call:

USA: 1-888-99-FLUKE (1-888-993-5853)

China: 010-65123435

Europe: +31 402-675-200

Japan: +81-3-3434-0181

Singapore +65-738-5655

Anywhere in the world: +1-425-446-5500

Visit Fluke's web site at www.fluke.com.

Unsafe Voltage

To alert you to the presence of a potentially

hazardous voltage, the Y symbol is displayed when

the Meter measures a voltage ≥ 30 V or a voltage

overload (OL) condition. When making frequency

measurements >1 kHz, the Y symbol is unspecified.

Test Lead Alert

XWWarning

Personal injury or damage to the

Meter can occur if you attempt to

make a measurement with a lead in an

incorrect terminal.

To remind you to check that the test leads are in the

correct terminals, LEAd is briefly displayed and an

audible beep sounds when you move the rotary

switch to or from any A (Amps) position.

Produktspecifikationer

Varumärke:	Fluke
Kategori:	Multimeter
Modell:	115C
Färg på produkten:	Grijs
Vikt:	1200 g
Bredd:	120 mm
Djup:	315 mm
Höjd:	48 mm
Internationell säkerhetskod (IP):	IP20
Certifiering:	EN 50081-1: B\nEN 50082-2:\nIEC 1000-4-2\nIEC 1000-4-3\nIEC 1000-4-4\nIEC 1000-4-8
Förvaringstemperatur:	-25 - 80 °C
Drifttemperatur (TT):	-10 - 50 °C
Antal-produkter-ingår:	1 stuk(s)
Mätkategori:	CAT III 600V, CAT IV 300V
Växelström (AC) maximal upplösning (med sond):	2400 A