Fluke 78 Bruksanvisning

Fluke Multimeter 78

Läs nedan 📖 manual på svenska för Fluke 78 (64 sidor) i kategorin Multimeter. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/64

Automotive Meter

Service Manual

For IEC 61010 CAT II Meters Only

PN 666617

November 1998

All product names are trademarks of their respective companies.

LIMITED WARRANTY & LIMITATION OF LIABILITY

Fluke Corporation (Fluke) warrants this product to be free from defects in material and workmanship under normal use and service for the life

of the product. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to

fuses, batteries or to any product which, in Fluke’s opinion, has been misused, altered, neglected or damaged by accident or abnormal

conditions of operation or handling. Fluke warrants that software will operate on appropriate Fluke instruments substantially in accordance

with its functional specifications for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that

software will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to

extend a greater or different warranty on behalf of Fluke.

Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase price, or free of charge repair or replacement of a defective

product which is returned to an authorized Fluke Service Center within the warranty period.

To obtain warranty service, contact your nearest Fluke Service Center or send the product, with a description of the difficulty, postage and

insurance prepaid (FCA Destination), to the nearest Fluke Service Center. Fluke assumes no risk for damage in transit. Following warranty

repair, the product will be returned to Buyer, transportation prepaid (FCA Destination). If Fluke determines that the failure was caused by

misuse, alteration, accident or abnormal condition of operation or handling, Fluke will provide an estimate of repair costs and obtain

authorization before commencing the work. Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer

will be billed for the repair and return transportation charges (FCA Shipping Point).

Warranty service is available outside the United States only if product was purchased through a Fluke Authorized Sales Outlet in the country

of use or the applicable Fluke international price was paid. Product transported from the United States for which the applicable Fluke

international price was not paid must be returned to the U.S. to receive warranty service, at the shipment expense and risk of Buyer. Fluke

reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for

repair in another country.

THIS WARRANTY IS PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR

LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT,

RELIANCE OR ANY OTHER THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental or

consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held

invalid or unenforceable by a court of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision of

this warranty.

Fluke Corporation Fluke Europe B.V.

P.O. Box 9090 P.O. Box 1186

Everett WA 5602 B.D. Eindhoven

98206-9090 The Netherlands

Safety Information

This meter complies with EN 61010-1:1993, ANSI/ISA S82.01-1994 and CAN/CSA

C22.2 No. 1010.1-92 Overvoltage Category II. Use the meter only as specified in the

Users Manual, otherwise the protection provided by the meter may be impaired.

A Warning identifies conditions and actions that pose hazards to the user; a Caution

identifies conditions and actions that might damage the meter. International electrical

symbols used on the meter are shown below.

W Warning

To avoid possible electric shock or personal injury:

• Do not use the meter if it is damaged. Before use, inspect the

case for cracks or missing plastic. Pay particular attention to the

insulation surrounding the connectors.

• Always turn off power to the circuit before cutting, unsoldering,

or breaking the circuit. Small amounts of current can be

dangerous.

• Inspect the test leads for damaged insulation or exposed metal.

Check test lead continuity. Replace damaged leads.

• To avoid damage or injury, never use the meter on unprotected

circuits that exceed 4800 volt-amps.

• Do not use the meter if it operates abnormally. Protection may be

impaired. When in doubt, have the meter serviced.

• Do not operate the meter around explosive gas, vapor or dust.

• Do not apply more than 300 V dc or ac rms (sine) between

terminals or between any terminal and earth ground.

• Before each use, verify the meter’s operation by measuring a

known voltage.

• When servicing the meter, use only specified replacement parts.

• Use caution when working above 30 V ac rms, 42 V ac peak, or 60

V dc. Such voltages pose a shock hazard.

• Keep your fingers behind the finger guards on the probe when

making measurements.

• Connect the common test lead before connecting the live test

lead. Disconnect the live test lead first.

• Remove test leads from the meter before opening the case.

• Use only a single 9 V battery, properly installed in the meter case,

to power the meter.

• Follow all equipment safety procedures.

• Before measuring current, check the meter’s fuses (see “How to

Test the Fuse”).

• Never touch the probe to a voltage source when the test leads are

plugged into the 10 A input jack.

Produktspecifikationer

Varumärke:	Fluke
Kategori:	Multimeter
Modell:	78
Färg på produkten:	Meerkleurig
Förpackningens vikt:	504 g
Förpackningens bredd:	262 mm
Djuppackning:	282 mm
Förpackningshöjd:	59 mm
Rekommenderad ålder (max):	14 jaar
Rekommenderad ålder (min):	7 jaar
Typ av förpackning:	Doos
Hållbarhetscertifikat:	Forest Stewardship Council (FSC) Mix
Föreslaget kön:	Jongen/meisje
Antal bitar:	406 stuk(s)
Ljudeffekter stöds:	Nee
Figur medföljer:	Ja
Typ produkt:	Bouwpakket
EU TSD-varning:	Niet geschikt voor kinderen onder de 36 maanden
Publiceringsdatum:	03/01/2018
Antal leksaksminifigurer:	5 stuk(s)