Fujitsu L22T-4 LED Bruksanvisning

Fujitsu Övervaka L22T-4 LED

Läs nedan 📖 manual på svenska för Fujitsu L22T-4 LED (15 sidor) i kategorin Övervaka. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/15
Operating Manual
LCD Monitor
Copyright © Fujitsu Technology Solutions GmbH 2011
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards
Association.
All other trademarks used in this document are trademarks or registered trademarks of their
respective owners and are recognised as being protected.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.
Contents
Introduction......................................................................................................................................... 1
Target group ......................................................................................................................................... 1
Notational conventions ......................................................................................................................... 1
Additional information ........................................................................................................................... 1
Important notes .................................................................................................................................. 2
Safety notes.......................................................................................................................................... 2
Power cable.......................................................................................................................................... 3
Transport .............................................................................................................................................. 3
Cleaning ............................................................................................................................................... 4
CE marking........................................................................................................................................... 4
FCC Class B Compliance Statement ........................................................................................... 4
Checking the contents of the consignment........................................................................................... 5
Connecting the monitor ..................................................................................................................... 6
Connecting cables to the monitor ......................................................................................................... 6
Connecting cables to the computer ...................................................................................................... 6
Operation of the monitor.................................................................................................................... 7
Adjusting rake....................................................................................................................................... 7
Switching the monitor on/off ................................................................................................................. 7
Troubleshooting.................................................................................................................................... 8
Explanatory information about standard ISO 9241-3 .................................................................... 10
Lit or unlit pixels.................................................................................................................................. 10
Fujitsu Technology Solutions
Fujitsu Technology Solutions
Important notes
The monitor must be disposed of in accordance with the local regulations for disposal of
special waste. The screen background lighting contains mercury. You must observe the
applicable handling and disposal safety regulations for fluorescent tubes.
Only qualified technicians should repair the device. Unauthorised opening and incorrect repair
may greatly endanger the user (electric shock, fire risk).
Use a screen saver with moving images and activate the power management for your monitor
to prevent still images from "burning in".
The screen may only be operated in the wide format (0° landscape mode). Turning with a
swivel arm or wall bracket mounted is not permitted.
Store this manual close to the device. If you pass the device on to third parties, you should
pass this manual on with it.
We recommend that you place your device on a durable, non-slip surface. In view of the many
different surface coatings and finishes used on furniture, it is possible that the feet of the device
could mark the surface they stand on.
Power cable
To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to
replace the original cable set.
The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements.
The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outer sheath.
For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
The cable set must be selected according to the rated current for your device.
If necessary, replace the original power cable with a regular grounded 3-core mains lead.
Transport
Transport the monitor with care and only in its original packaging or another corresponding
packaging fit to protect it against knocks and jolts.
Never drop the LCD monitor (danger of glass breakage).
Fujitsu Technology Solutions 3
Important notes
Cleaning
Always pull out the power plug before you clean the monitor.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid will run into the system.
Ensure that the ventilation areas of the monitor are free.
The display surface of the LCD monitor is sensitive to pressure and scratches. Clean it only
using a soft, slightly moistened cloth.
Wipe the monitor casing with a dry cloth. If the monitor is particularly dirty, use a cloth which has
been moistened in mild domestic detergent and then carefully wrung out.
CE marking
The shipped version of this device complies with the requirements of the EC directives
2004/108/EC "Electromagnetic compatibility" and 2006/95/EEC "Low voltage directive".
FCC Class B Compliance Statement
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital device,
pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-
Causing Equipment Standard ICES-003 for digital apparatus. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in strict
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for Service.
Fujitsu Technology Solutions GmbH is not responsible for any radio or television interference caused
by unauthorised modifications of this equipment or the substitution or attachment of connecting
cables and equipment other than those specified by Fujitsu Technology Solutions GmbH. The
correction of interferences caused by such unauthorised modification, substitution or attachment will
be the responsibility of the user.
4 Fujitsu Technology Solutions
Important notes
Checking the contents of the consignment
!
The display surface of the LCD monitor is sensitive to pressure and scratches. Always
hold the device by the casing!
Unpack all the individual parts.
Check the delivery for damage incurred during transportation.
Check whether the delivery agrees with the details in the delivery note.
The complete LCD monitor package includes:
one monitor
data cable
one power cable
one Warranty Booklet
this "Getting Started" manual
Should you discover that the delivery does not correspond to the delivery note, notify your local sales
outlet immediately.
i
We recommend that you keep the original packaging material. You may need the
packaging in the future if you need to transport your device.
Fujitsu Technology Solutions 5

Produktspecifikationer

Varumärke: Fujitsu
Kategori: Övervaka
Modell: L22T-4 LED

Behöver du hjälp?

Om du behöver hjälp med Fujitsu L22T-4 LED ställ en fråga nedan och andra användare kommer att svara dig




Övervaka Fujitsu Manualer

Övervaka Manualer

Nyaste Övervaka Manualer