Full Boar FBDWS-6100U Bruksanvisning
Full Boar
Polermaskin
FBDWS-6100U
Läs nedan 📖 manual på svenska för Full Boar FBDWS-6100U (9 sidor) i kategorin Polermaskin. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/9
WARNING: Read all safety warnings and instructions before use. Failure
to follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save these instructions for future reference.
02/17
DRYWALL
SANDER KIT
INSTRUCTION MANUAL
• 600W MOTOR
• PIVOTING SANDING HEAD
• HOOK & LOOP SYSTEM
• 6 SANDING SHEETS &
KIT BOX INCLUDED
2
Voltage: 230-240V ~ 50Hz
Power: 600W
Sanding Paper Size: Ø225mm
Paper Fitment: Hook & Loop
No Load Speed: 600-1500/min
Weight (Tool Only): 3.2kg
SPECIFICATIONS - MODEL NO. FBDWS-6100U
KNOW YOUR PRODUCT
1. Pivoting head
2. Extraction hose
3. Motor housing
4. Collapsible handle
5. Variable speed control
6. Lock-on button
7. Soft grip main handle
8. Adjustable rear handle
9. Sanding head
10. Extension handle lock
11. Extraction hose lock
12. Extraction hose
1
2 3
4
5
6
7
12
11
10
9
8
4
Congratulations on purchasing a Full Boar drywall sander kit.
It will make quick work of sanding plasterboards to achieve a
smooth finish, ready for paint.
Read and understand the instruction manual before operating
the demolition hammer. Failure to do so could result in
personal injury or equipment damage.
INTRODUCTION
WARNING! When using mains-powered tools, basic safety precautions, including the
following, should always be followed to reduce risk of fire, electric shock, personal injury
and material damage.
Read the whole manual carefully, and make sure you know how to switch the tool off in an emergency,
before operating the tool. Save these instructions and other documents supplied with this tool for
future reference. The manufacturer cannot accept any liability for damage or accidents which arise
due to a failure to follow these instructions and the safety information.
Before you connect the equipment to the mains supply make sure that the data on the rating plate is
identical to the mains data.
This tool is double insulated therefore no earth wire is required.
The power supply for this product should be protected by a residual current device (rated at 30mA or
less). A residual current device reduces the risk of electric shock.
If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord
available through the service organisation.
Note: Double insulation does not take the place of normal safety precautions when operating this
tool. The insulation system is for added protection against injury resulting from a possible electrical
insulation failure within the tool.
Using an extension lead
Always use an approved extension lead suitable for the power input of this tool. Before use, inspect
the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or
defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead
not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire
and electric shock.
ELECTRICAL SAFETY
Produktspecifikationer
| Varumärke: | Full Boar |
| Kategori: | Polermaskin |
| Modell: | FBDWS-6100U |
Behöver du hjälp?
Om du behöver hjälp med Full Boar FBDWS-6100U ställ en fråga nedan och andra användare kommer att svara dig
Polermaskin Full Boar Manualer
8 September 2024
Polermaskin Manualer
- Polermaskin DeWalt
- Polermaskin Makita
- Polermaskin Black And Decker
- Polermaskin Metabo
- Polermaskin Parkside
- Polermaskin Worx
- Polermaskin Milwaukee
- Polermaskin Einhell
- Polermaskin Ultimate Speed
- Polermaskin Craftsman
- Polermaskin Powerplus
- Polermaskin Porter-Cable
- Polermaskin Westfalia
- Polermaskin Holzmann
- Polermaskin Rikon
- Polermaskin Robust
- Polermaskin Einhell Bavaria
Nyaste Polermaskin Manualer
18 Oktober 2024
18 Oktober 2024
4 Oktober 2024
26 September 2024
22 September 2024
21 September 2024
21 September 2024
20 September 2024
20 September 2024
18 September 2024