G-Technology 0G00199 Bruksanvisning

Läs nedan 📖 manual på svenska för G-Technology 0G00199 (18 sidor) i kategorin Extern hårddisk. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/18
Table of Contents
Introduction
Safety Precautions
System Requirements
What’s in the Box
G-DRIVE Overview
Installing G-DRIVE
Initializing G-DRIVE
Disconnecting G-DRIVE
Optimizing Performance
Technical Support
Limited Warranty
The lightning ash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated dangerous voltage within the product
enclosure and may be of signi cant risk of electrical shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating maintenance (servicing) instructions literature
accompanying the appliance.
!
!
!
!
1. READ INSTRUCTIONS
All the safety and operating instructions
should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should
be retained for future reference.
3. HEED WARNINGS
All Warnings on the unit and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
5. ATTACHMENTS
Do not use attachments no recommended
by the unit’s manufacture as they may cause
hazards.
6. WATER AND MOISTURE
Do not use this unit near water–for example,
near a bathtub, washbowl, kitchen sink or
laundry tub, in a wet basement or near a
swimming pool.
7. ACCESSORIES
Do not place this unit on an unstable cart,
stand, tripod, bracket or table. The unit may
fall, causing serious injury and serious
damage to the unit.
8. VENTILATION
Openings in the front and back of the unit
are provided for ventilation to ensure reliable
operation and to protect it from overheating.
These openings must not be blocked or
covered. This unit should never be placed
near or over a radiator or heat source. This
unit should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided.
9. POWER SOURCES
This unit should be operated only from the
type of power source indicated on the rating
label. If you are not sure of the type of power
supply in your facility, consult your local
dealer or power company.
!
10. GROUNDING AND POLARIZATION
This equipment is supplied with a power
cord with a US style 3-wire grounding type
plug at one end and a 3-wire IEC standard
connector at the other. The 3-wire grounding
type plug will t into a US style grounding
type power outlet and the IEC connector is
intended to plug into the G-Tech unit. The 3-
wire grounding type plug is a safety feature.
If you are unable to insert the plug into the
outlet, do not force it. Contact your
electrician to replace the obsolete outlet. DO
NOT DEFEAT THE SAFETY PURPOSE OFTHE
GROUNDING TYPE PLUG. For use in Foreign
Countries, contact your local G-Tech dealer or
representative to obtain a power cord with a
locally compatible 3-wire grounding plug on
one end and a 3-wire IEC standard connector
to the other.
11. POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles and the
point where they exit the unit.
12. SERVICING
Do not attempt to service this unit yourself
as opening or removing covers may expose
you to dangerous voltages or tother hazards
(see Caution Symbol at rear of power supply
chassis). Refer all servicing to quali ed
service personnel.
IMPORTANT SAFEGUARDS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PART’S
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE APPLIANCE TO RAIN OR MOISTURE.
2
Introduction
Thank you for purchasing the G-DRIVE™ from G-Technology™.
G-DRIVE hard drives from G-Technology are the ideal storage
solutions for content creation professionals.
G-DRIVE high-speed interface external storage systems o er
the ultimate in exibility by providing a quad interface, which
includes eSATA, FireWire™ 800, FireWire 400 (via an included 9
pin to 6 pin cable) and USB 2.0. With up to 2TB of storage
capacity, G-DRIVE is the perfect high-performance solution
for storage intensive applications including audio/video
editing, digital photography, MP3 libraries and high-speed
data back up. The system remains whisper quiet with its fan-
less cooling system. The latest Hitachi 7200 RPM drives with
up to 32MB of cache and an Oxford 934 chipset all encased in
a rugged, stylish and recyclable enclosure.
The G-DRIVE is also ideal for backing up your
Mac® automatically using Time Machine™.
G-DRIVE is the only portable drive to feature a
silent, “fan-less design and an integrated cooling
system to ensure reliable operation and long life.
NOTE: G-DRIVE is formatted for the MAC OS
and will mount on the desktop right out of
the box. For details on reinitializing the G-
DRIVE, using the G-DRIVE on Windows®, or for
using the G-DRIVE for both Windows and Mac,
click here.
Safety Precautions
The disk drive contained in your G-DRIVE is a delicate
electronic instrument and is susceptible to damage due to
excessive physical shock. Place the unit in a vented area away
from moisture or liquids. Please handle the unit with care. Do
not open the case. Doing so will void the warranty. If the
product is returned with damage caused by improper
handling, the warranty will be void and liability will rest with
the user.
System Requirements
eSATA/ FireWire 800 / USB 2.0 operation
• Mac OS X 10.3 or higher
3

Produktspecifikationer

Varumärke: G-Technology
Kategori: Extern hårddisk
Modell: 0G00199

Behöver du hjälp?

Om du behöver hjälp med G-Technology 0G00199 ställ en fråga nedan och andra användare kommer att svara dig




Extern hårddisk G-Technology Manualer

Extern hårddisk Manualer

Nyaste Extern hårddisk Manualer