GARDE 181LETCUT12 Bruksanvisning

GARDE Skärmaskin 181LETCUT12

Läs nedan 📖 manual på svenska för GARDE 181LETCUT12 (4 sidor) i kategorin Skärmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
USER MANUAL
1” x 1” Cut
Item #181LETCUT1
½” x ½” Cut
Item #181LETCUT12
07/2020
Lettuce Cutters
Safety Instructions
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades. When not in use, use the ring pin to secure the machine in the down posion.
Operation
1) Remove ring pin from lockdown posion hole.
2) Insert ring pin into hole on handle.
3) Li and hold the handle in the upright posion and place a head of leuce on the blade surface.
4) Remove hands and ngers from the cung area.
5) Firmly push the handle down so that the push plate forces the product completely through the blades.
6) Clean the machine aer chopping is complete using the cleaning instrucons below.
7) Do not aempt to cut produce larger than the surface of the blade assembly.
Cleaning and Maintenance
1) Remove ring pin and use handle to li push plate o of the guide rods.
2) Remove hold down clips and remove the blade assembly from the frame.
3) Use a damp cloth or sponge to wipe down the frame. Clean the push plate and blade assembly
thoroughly.
4) Make sure frame, blade assembly, and all other components are dried thoroughly.
5) Replace blade assembly, and then re-aach hold down clips.
6) When necessary, lubricate guide rods with mineral oil, food grade grease, or paran. Do not use
cooking oil.
7) Replace push plate then return handle to down posion. Replace the ring pin for safe storage.
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following the instrucons
listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
USER MANUAL
Replacement Parts
1” x 1” Blade Assembly
#181LETBLD1
½” x ½” Blade Assembly
#181LETBLD12
Bumper
#181BUMPER2
Non-Skid Feet
#181NSKIDFEET
Bushing
#181BUSHING2
USER MANUAL
Chain and Pin Assembly
#181CHAINPIN

Produktspecifikationer

Varumärke: GARDE
Kategori: Skärmaskin
Modell: 181LETCUT12

Behöver du hjälp?

Om du behöver hjälp med GARDE 181LETCUT12 ställ en fråga nedan och andra användare kommer att svara dig




Skärmaskin GARDE Manualer

Skärmaskin Manualer

Nyaste Skärmaskin Manualer