Gemini GCH70S Bruksanvisning

Läs nedan 📖 manual på svenska för Gemini GCH70S (7 sidor) i kategorin Fläktkåpa. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
1
ENVIRONMENT OF OPERATION:
This appliance is designed for home or indoor environment and not for
commercial use.
PRECAUTIONS:
Please read this instruction manual carefully before installation.
During the installation, power supply must be disconnected.
1. The installation should be carried out by a qualified technician.
2. Air ventilation inside kitchen must be maintained in good condition
when range hood is used.
3. Do not put flame on the range hood. Please turn on hood before
turning on the hob.
4. Repair service including replacement of main cord should only be
carried out by a qualified electrician.
5. All process should follow the instructions as stated in this manual,
could not change or move parts against instruction to avoid danger or
damage.
6. In case of lamp broken, please disconnect the power before change.
Release the whole bottom damper to change the old lamp. Maximum
power is 40W flourescent lamp.
7. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
8. In case of changes in techinical specification, there would be no prior
notice.
INSTALLATION:
This appliance must be earthed. Installation must be carried out
only when power supply is disconnected.
Instruction Manual and Installation Instructions
Easy Detachable Range Hood
易拆式抽油煙機
cn
en
GCH70S
ITALY
1. Unpack Carton
2. The installation height is measured vertically from the bottom of the
hood to the top of stove. The height should be at least 650mm and the best
recommended height is 650-800mm , avoid left-right or up-down inclination.
3
Built-under Instruction
Grille
Cabinet
Mount the hood
Insert the screw
Release the bottom
damper and screw it
tightly
Paddle Switch
Lamp
Bottom damper
FUNCTION:
1. The Paddle switch design has stable function, reliable safety and
long lifetime.
2. Left and right Blower Wheel work separately and at one time; 2-fan
speed control to suit different types of cooking.
3. The Strong Suction Design effectively drain the oil and smoke entirely;
The newly designed oil collecting device in 15 drain the oil to the °
oil cup.
Operation:
1. Button “ ”
Press The Iamp button for the on / off
2. L and R Button“ ”
2
Wall Mounting Instruction
Hanging Bracket
Insert the screw
Unscrew the screws
then pull up to the end
and lock tightly
Align the Hanging
Bracket holes mounting
the hood on the wall
Wall
Oilcup
3. The range hood should be firmly mounted on the wall ( wall mounted installation
method ). This can be done by drilling two holes on the appropriated position of the
wall and install the expandable rubber plug into the holes . Then tightening up the
self-tapping screws into the rubber plug by 4/5 in depth.
4. Loose the screws a bit at the hood hanging board don't remove screws and pull
the hanging board all the way up then tightening up the screws again .
5. Please install the hood by using the hanging board tag onto the self-tapping
screws which mounted on the wall and adjust the hood level then fixing the screws.
6. The range hood can install under the kitchen cabinet by using screws to fix at
the bottom of the cabinet . Besides , the exhaust duct has to be installed through
the cabinet to the outside of the window. ( Cabinet mounted type )
7. 6 inches diameter exhaust duct is recommended to use in order to maximize
suction efficiency. Bend of exhaust duct should be greater than 9, to keep
exhaust smooth. To increase the efficiency of hood , the length of exhaust duct
should be and avoid acute turns. face down with downward
8. The air must not be discharged into the flue that is used for exhausting fumes
from appliances burning gas or other fuels ( not applicable to appliances that
only discharge the air back into the room ) , regulations concerning the
discharge of air have to be fulfilled.
9. Check the voltage on the rating label which should match the national or local code.
4
MAINTENANCE:
before cleaning.
1. Please clean your hood regularly, do not use abrasive cleaner. Always
clean the oil cups and retainers by detaching or turning in anti-clockwise
and re-install, to prevent oil spillage and prolong the life of the hood.
2. After each operation, please wipe the machine with a dry cloth or a wet
cloth.
3. Must use foamless hood cleaner for cleaning process to avoid damage
to the hood. Dilute the hood cleaner with water for cleaning. (We
recommend water to cleaner=20:1
4. Do not distort the exhaust fan, do not use abrasive cleaner.
Caution: Always disconnect the machine from the power supply
“ ”L and R control the left and right motor separately;“ ”
motor control button and right motor control button is the low
speedis the high speed; O is off.“ ”
Adjust the fan speedoraccording to your requirements.
“ 、L R is left
5
PERFORMANCE AND DIMENSIONS:
MODEL
RATED
VOLTAGE
RATED
FREQUENCE
MOTOR
WATTS
LAMP
WATTS
MAX.
DIMENSION
(mm)
SPECIFICATIONS MAY CHANGE WITHOUT PRIOR NOTICE.
WIRING DIAGRAM:
220V-240V~
50Hz 65W 2 40W×
MOTOR
RL
MOTOR
BLUE
YELLOW-GREEN
BROWN
L
N
PLUG
SAFETY SWITCH
ORANGE
ORANGE
ORANGE
GRAY
BLACK
BLACK
WHITE
BLUE
YELLOW
YELLOW
BLUE
WHITE
WHITE
GCH70S
W705 D520 H163× ×
R MOTOR
Low Speed
High Speed
Off
L MOTOR
Low Speed
High Speed
Off
LAMP
on
off
GRAY
BLACK
lamp

Produktspecifikationer

Varumärke: Gemini
Kategori: Fläktkåpa
Modell: GCH70S

Behöver du hjälp?

Om du behöver hjälp med Gemini GCH70S ställ en fråga nedan och andra användare kommer att svara dig




Fläktkåpa Gemini Manualer

Gemini

Gemini GCH70S Bruksanvisning

2 September 2024

Fläktkåpa Manualer

Nyaste Fläktkåpa Manualer