General Electric X400 Bruksanvisning

Läs nedan 📖 manual på svenska för General Electric X400 (89 sidor) i kategorin Kamera. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/89
EN
GE Digital Camera
Power Pro Series : X400
Appendix
Camera Connectivity
Using the Menus
Playback
Camera Function Controls
Basic Operation
Getting Started
User Manual
imagination at work
i
This symbol [crossed-out wheeled bin WEEE Annex IV]
indicates separate collection of electrical waste and
electronic equipment in the European countries. Please
do not throw the equipment into domestic refuse. Please use
the return and collection systems available in your country for
proper safe disposal of this product.
Declaration of Conformity
Model Name: X400
Trade Name: GE
Responsible Party: General Imaging Company
Address: 1411 W. 190th Street, Suite 550, Gardena,
CA 90248, U.S.A.
Customer Service Telephone Number: +1-800-730-6597
(Outside U.S. & Canada: +1-310-755-6857)
WARNING
To prevent re hazard or electrical shock, do not expose
the camera battery pack or other accessories to water or
humidity.
For Customers in the U.S.A.
Tested to Comply with FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
For Customers in Europe
"CE" mark indicates that this product complies
with the European requirements for safety, health,
environment and customer protection. "CE" marked cameras
are intended for sales in Europe.
iiii
SAFETY PRECAUTIONS
Camera Notes:
Do not store or use the camera in the following types of locations:
In rain, very humid and dusty places.
In a place where the camera can be exposed directly to
sunlight or subject to high temperature, e.g. Inside a closed
car in summer.
In a place where the camera is subject to a high magnetic
eld, e.g. near motors, transformers or magnets.
Do not place the camera on a wet surface or or in places where
dripping water or sand may come in contact with the camera;
doing so may cause irreparable damage.
If the camera will not be used for a long period of time, we
suggest you remove the batteries and the memory card from
the camera and keep them in dry environment.
Moisture may form inside the camera if the camera is sud-
denly brought from a cold location to a warm location. Allow
moisture to completely dry prior to turning on camera.
If water has penetrated the camera housing, turn o the
camera and remove the battery and memory card. Allow the
camera to air-dry for at least 24 hours before using again.
If camera overheats, while in use or charging, disconnect
thecharger and carefully remove batteries.
Battery Notes:
Incorrect use of the batteries may cause them to leak, become
hot, ignite or burst. Always observe the precautions given below:
Do not expose the batteries to water and take particular
care to keep the terminals dry
Do not heat the batteries or throw them into a re
Do not attempt to deform, disassemble or modify the batteries
Keep the batteries out of reach of babies and small children.
In cold locations, battery performance will deteriorate and the
life span of the battery may be compromised.
Memory Card Notes:
When using a new or used SD memory card, or a SD memory card
that has been initialized by a PC or a dierent model camera, be
sure to reformat the card with your digital camera before using it.
When editing image data, copy the image data to the PC’s hard disk first.
Do not change or delete the folder or le names on the SD memory
card from your PC. This may cause a memory card read error to
occur when viewing photos on the memory card from the playback
mode in your camera.
The photos taken by this camera are stored in the auto-generated
folder on the SD memory card. Do not store photos that are not
taken by this model camera, as this may cause a read error to
occur when the camera is in playback mode.
Do not expose the camera to harsh environments such as moisture
or extreme temperatures, which may shorten the life of your
camera or damage the batteries.
Do not remove the memory card without turning the camera
o to avoid possible damage of your memory card.
Do not switch off the digital camera when a writing process is in process
to avoid incomplete data writing and damaged or loss of pictures.
Align the SD memory card correctly before inserting it into the
camera's SD memory card slot. Do not force the SD memory
card into the camera's SD memory card slot.

Produktspecifikationer

Varumärke: General Electric
Kategori: Kamera
Modell: X400

Behöver du hjälp?

Om du behöver hjälp med General Electric X400 ställ en fråga nedan och andra användare kommer att svara dig




Kamera General Electric Manualer

Kamera Manualer

Nyaste Kamera Manualer