Genesis GSHD1290 Bruksanvisning

Genesis Borrmaskin GSHD1290

Läs nedan 📖 manual på svenska för Genesis GSHD1290 (13 sidor) i kategorin Borrmaskin. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

1/2" Spade-Handle Electric Drill

Perceuse électrique de 13mm à poignée bêche

Taladro eléctrico de mango tipo pala de 1/2"

GSHD1290

Operator’s Manual

Manuel d’utilisation

Manual del Operario

888-552-8665

TOLL FREE

HELP LINE:

WEBSITE: www.genesispowertools.com

English

1/2" Spade-Handle Electric Drill

Operator’s Manual GSHD1290

SPECIFICATIONS

• Model: ------------------------ GSHD1290

• Rated Power: ----------------- 120V~/60Hz, 9.0 Amp

• No Load Speed: -------------- 0-850 RPM

• Chuck: ------------------------ 1/2” (13mm) Keyed

• Cord Length: ------------------ 6.5 ft.

• Net Weight: -------------------- 8.0 Lbs

Includes: Auxiliary Handle, Rear Spade Handle and Chuck Key with Holder

WARNING: To reduce the risk of injury, user must read and understand this

operator’s manual before operating this tool. Save this manual for future reference.

Toll-Free Help Line: 1-888-552-8665

The Operation of any power tool can result in foreign WARNING:

objects being thrown into your eyes, which can result in severe eye damage.

Before beginning tool operation, always wear safety goggles or safety glasses

with side shields and a full face shield when needed. We recommend Wide

Vision Safety Mask for use over eyeglasses or standard safety glasses with

side shields. Always wear eye protection which is marked to comply with ANSI

Z87.1.

Look for this symbol to point out important safety

precautions. It means attention!!! Your safety is

involved.

GENERAL SAFETY RULES

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and

other construction activities contains chemicals known to cause cancer, birth defects or

other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks and cement and other masonry products.

• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure

to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust

masks that are specially designed to ﬁlter out microscopic particles .

WARNING: Read and understand all warnings, cautions and operating

instructions before using this equipment. Failure to follow all instructions listed below

may result in electric shock, ﬁre and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA SAFETY

• Cluttered benches and dark areas invite accidents.Keep your work area clean and well lit.

• Do not operate power tools in explosive atmospheres, such as in the presence of

ﬂammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.

WEAR YOUR

FORESIGHT IS BETTER

THAN NO SIGHT

SAFETY GLASSES

English

ELECTRICAL SAFETY

• . Power tool plugs must match the outlet Never modify the plug in any way. Do not use any

adaptor plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized

plug (one blade is wider than the other). This plug will ﬁt in a polarized outlet only one way. If the plug does not

ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install a polarized

outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded

power cord and grounded power supply system.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

• Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is

grounded.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock.

• When operating a power tool outside, use an extension cord suitable for

outdoor use. These cords are rated for outdoor use and reduce the risk of electric shock.

• Do not use AC only rated tools with a DC power supply. While the tool may appear to

work. The electrical components of the AC rated tool are likely to fail and rate a hazard to the operator.

PERSONAL SAFETY

• , Stay alert watch what you are doing and use common sense when operating a power tool. Do not

use tool while tired or under the inﬂuence of drugs, alcohol, or medication. A moment of inattention while

operating power tools may result in serious personal injury.

• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries.

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air vents may cover moving

parts and should be avoided.

• Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying

power tool with your ﬁnger on the switch or plugging in power tools that have the switch on invites accidents.

• Remove any adjusting keys or wrenches before turning the power tool on. A

wrench or key that is left attached to a rotating part of the tool may result in personal injury.

• Do not overreach. Maintain proper footing and balance at all times. Loss of balance can cause an

injury in an unexpected situation.

• If devices are provided for connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of these devices can

reduce dust related hazards.

• Do not use a ladder or unstable support. Stable footing on a solid surface enables better

control of the tool in unexpected situations.

• Keep tool handles dry, clean and free from oil and grease. Slippery handles cannot

safely control the tool.

TOOL USE AND CARE

• . Secure the workpiece Use clamp or other practical way to hold the workpiece to a stable platform.

Holding the workpiece by hand or against your body is unstable and may lead to loss of control.

• Do not force the power tool. The tool will perform the job better and safer at the feed rate for

which it is designed. Forcing the tool could possibly damage the tool and may result in personal injury.

• Use the correct power tool for the job. Don’t force the tool or attachment to do a job for

which it is not designed.

• Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled

with the switch is dangerous and must be repaired or replaced by an authorized service center.

Produktspecifikationer

Varumärke:	Genesis
Kategori:	Borrmaskin
Modell:	GSHD1290
Färg på produkten:	Zwart
Snäll:	Digitale wekker
Kraftkälla:	AC
På-/-Av-knapp:	Ja
Snooze-funktion:	Ja
Inbyggda högtalare:	Ja
FM-radio:	Ja
Bakgrundsbelysning:	Ja
Bakgrundsbelysning-färg:	Rood
Frekvensband som stöds:	AM, FM
Antal-larm:	1
Type beeldscherm:	LED
Barndesign:	Nee
Inbyggd radio:	Ja