Genie AC2000SC Bruksanvisning
Genie
Betalterminal
AC2000SC
Läs nedan 📖 manual på svenska för Genie AC2000SC (51 sidor) i kategorin Betalterminal. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/51
Copyright 2000 By Union Community Co., LTD.
AC-2000 USER GUIDE .
Version Eng-1.00
AC-2000 User Guide 2
UNIONCOMMUNITY Co., Ltd. 12F, Daemyung Valeon, 127, Beobwon-ro, /
Songpa-gu, Seoul, 05836, Republic of Korea
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
<Revison History>
Version Date Description Firmware Version
1.00 2016-12-06 -Initial Release 10.61.00-000.02
AC-2000 User Guide 3
UNIONCOMMUNITY Co., Ltd. 12F, Daemyung Valeon, 127, Beobwon-ro, /
Songpa-gu, Seoul, 05836, Republic of Korea
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
<Glossaries>
Admin (Administrator)
- The administrator can access to the terminal menu mode. He/she has the authority to
add/modify/delete terminal users and to change the operating environment by
changing settings.
- If there is no registered administrator in the terminal, anybody can access to the
terminal menu and change settings. It is recommended that more than one
administrator will be necessarily registered in the terminal.
- The administrator has the authority to change critical environmental settings of the
fingerprint reader. So, special attention is required to its registration and operation.
1:1 Authentication (1 to 1 Verification)
- The user fingerprint is verified after entering User ID or Card.
- Only User ID or the user fingerprint registered to the card is compared. This is called
1:1 Authentication.
1:N Authentication (1 to N Identification)
- The user is identified only by the fingerprint.
- The same fingerprint as the input fingerprint is identified among the registered
fingerprints without User ID or Card entered. This is called One-to-N Identification.
Authentication Level
- As a level used for fingerprint authentication, it is displayed in Step 1 to 9.
Authentication cannot be allowed before the degree of match between two
fingerprints is higher than the set authorization level.
- The higher authentication level may ensure the higher security. But it requires the
relatively high concordance rate. So it high likely to deny authentication when trying
to authenticate.
- 1:1 Level: Authentication level used for 1:1 authentication
- 1:N Level: Authentication level used for 1:N authentication
Authentication Method
- This refers to various types of authentication methods composed of each combination
of FP(Fingerprint) and RF(Card) and so forth.
Ex) Card or FP: Authenticated by either card or fingerprint
Produktspecifikationer
| Varumärke: | Genie |
| Kategori: | Betalterminal |
| Modell: | AC2000SC |
Behöver du hjälp?
Om du behöver hjälp med Genie AC2000SC ställ en fråga nedan och andra användare kommer att svara dig
Betalterminal Genie Manualer
4 Oktober 2024
Betalterminal Manualer
- Betalterminal Adyen
- Betalterminal Akasa
- Betalterminal Trust
- Betalterminal Axis
- Betalterminal Ewent
- Betalterminal HID Identity
- Betalterminal Approx
Nyaste Betalterminal Manualer
17 September 2024
14 September 2024
5 September 2024
2 September 2024
27 Augusti 2024
13 Augusti 2024
23 Juli 2024
22 Juli 2024
21 Juli 2024