George Foreman Mix & Go GFBL300 Bruksanvisning

George Foreman Blandare Mix & Go GFBL300

Läs nedan 📖 manual på svenska för George Foreman Mix & Go GFBL300 (14 sidor) i kategorin Blandare. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/14
GFBL3002CS_IB&RB_FA_240715
Instructions & Warranty
GEORGE FOREMAN®
MIX & GO WITH CHILL STICKS
GFBL3002CS
2
Congratulations on the purchase of your George Foreman Mix & Go. Each unit is
manufactured to ensure safety and reliability. Before using the appliance for the rst time,
please read the instruction book carefully and keep it for future reference. Pass it on if you
pass on the appliance.
When using electrical appliances, basic safety precautions should always be followed.
1. Drink Bottle Lid
2. Blender Bottle
3. MAX ll line when using Chill Stick
4. Blade Assembly
5. Blender Base
6. Chill Stick MAX ll line
7. Chill Stick lid
6
7
1
2
3
4
5
3
BEFORE FIRST USE
CAUTION: Handle blades carefully.
Remove all packaging material and any stickers from the product.
As some parts may be packed separately, check to ensure all items have
been unpacked before disposing of the packaging.
Clean all parts as instructed in the CARE AND CLEANING section
of this manual.
Freeze the Chill Sticks in advance so these are ready for when you make a drink.
Detach the Chill Stick from the drink bottle lid by rotating clockwise.
Open the lid of the Chill Stick and ll to its max line with cool water. Never ll with hot
liquids or solids.
Close the lid and place in the freezer.
HOW TO USE
Note: Prior to use, the blender bottle should be dismantled and washed as instructed
in the CARE AND CLEANING section of this manual.
Sit the blender on a stable, level, dry surface.
Plug the cord into a standard electrical outlet.
Place the blender bottle on a at surface with the open end facing up.
Place foods to be blended into bottle, liquids rst, then any solids.
Note: Be sure not to fill ingredients past the 600mL marking of the personal blending
bottle. If using the Chill Stick, do not fill ingredients past the CHILL STICK MAX
marking of the personal blending bottle.
CAUTION: Do not blend hot/warm ingredients - always allow to cool to room
temperature before blending.
Fasten the blade assembly on to the open end of the blender bottle and turn
it in a clockwise direction until it is locked.
Turn the bottle upside down & line up arrows on the blade assembly to the
arrows on the blender base and place the blender bottle in the blender base.
The blender will automatically begin as soon as the blender bottle is pushed
down into the blender base.
For hands free continuous blending, simply turn the bottle clockwise in
the blender base.
To stop blending simply remove your hand from the blender bottle or if you have
locked the blender bottle into the base, turn it anti clockwise to release it.
Once the blades have stopped rotating, pull the blender bottle out of the blender base
& turn the bottle over and place on a at surface.
Take a Chill Stick from your freezer and attach to the recess on the underside of the
drink bottle lid by rotating anti-clockwise.
Replace the blade assembly with the drink bottle lid and Chill Stick attached.

Produktspecifikationer

Varumärke: George Foreman
Kategori: Blandare
Modell: Mix & Go GFBL300

Behöver du hjälp?

Om du behöver hjälp med George Foreman Mix & Go GFBL300 ställ en fråga nedan och andra användare kommer att svara dig




Blandare George Foreman Manualer

Blandare Manualer

Nyaste Blandare Manualer