Gingko Cube Click Clock Bruksanvisning

Gingko klocka Cube Click Clock

Läs nedan 📖 manual på svenska för Gingko Cube Click Clock (20 sidor) i kategorin klocka. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/20
clickclock
TM
time at the click of your fingers
G
Gingko
DESIGN - QUALITY - TIME
- displays time,date and temperature alternately or permanent time only
- sound activated display or permanent display
- 12 and 24 hour formats can be selected (initial mode: 24 hour).
- weekday or weekend day alarm setting
: Press and Hold to access the settings mode
: to scroll up the number in setting mode / to change temperature format in normal
display mode
to scroll down the number in settings mode/ to switch between weekday and
weekend day alarm in normal display mode
: to access to the alarm setting
to turn on or turn off Touch/ Sound Activation function / Press and Hold to set
permanent time display only
( : make sure you start setting the clock within 5 seconds after
accessing to the setting mode or it will revert to the non setting mode)
1. Press button and hold it down for 3 -5 seconds to access to settings mode, and
the YEAR display number will be flashing.
2. Press or button to select your required YEAR display number, then press
to confirm and the MONTH display number will be flashing
3. Press or button to select your required MONTH display number, then press
to confirm and the DAY display number will be flashing
4. Press or button to select your required DAY display number, then press to
confirm and the HOUR display number will be flashing
5. Press or button to select your required HOUR display number, then press to
confirm and the MINNUTE display number will be flashing
6. Press or button to select your required MINUTE display number, then press to
confirm and it will show up 24H display.
7. Press or button to select 24H or 12H format display, then press to confirm and
exit the setting. When in 12H format display, there will be a dot display on the left top
of the display screen if the clock is in PM time.
1. Press + button to change the temperature format between Celsius and Fahrenheit
when the clock in normal display.
2. Press + button and hold it down to change the date format between DD/MM and MM/DD
1. Press the button to access the alarm setting menu and the display
screen will show which means the alarm is currently off.
2. To set your alarm time, press and hold down the button and the display screen will
change to 0:00. Then press SET button and the alarm hour section will be flashing.
3. Press or button to select your required alarm HOUR, then press to confirm and
the alarm MINUTE display number will be flashing
4. Press or button to select your required alarm MINUTE, then press to confirm
and exit the alarm setting.
5. To turn off the alarm, press and hold down the button and the display will
go back to to turn it back on, press and hold down this button again.
6. To set week day or weekend day alarm setting, press - button to change between 5AL
and 7AL when the clock is in normal display.
The sound activated function can be turned off so the display will stay on
permanently. But having this function turned on saves energy or saves the
batteries life. The clock can also be set to display time only, without alternating
between date and temperature.
1. To turn on/off sound activation function, simply press the ' ' button. When
clock displays ' , it means the sound activation function is on. When clock
displays '- - , it means the sound activation function is off.
2. Press and hold the button for 3 seconds until a beep, the Clock will be set on time
display only. To turn back to normal display, press and hold down the button again
until a beep.

Produktspecifikationer

Varumärke: Gingko
Kategori: klocka
Modell: Cube Click Clock

Behöver du hjälp?

Om du behöver hjälp med Gingko Cube Click Clock ställ en fråga nedan och andra användare kommer att svara dig




klocka Gingko Manualer

klocka Manualer

Nyaste klocka Manualer