Gossen Metrawatt SMARTCONTROL Bruksanvisning

Gossen Metrawatt Smarth hem SMARTCONTROL

Läs nedan 📖 manual på svenska för Gossen Metrawatt SMARTCONTROL (24 sidor) i kategorin Smarth hem. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/24
Operating Instructions
SMART CONTROL | ECS 3-349-423-03
Energy Management-System 4/5 9.1
2013
Please note: This software is protected by German copyright and international treaties.
Unauthorized copying or distribution of this software, either in part or in its entirely, is subject
to prosecution by law.
2 -I Messtechnik GmbH GMC
1 Range of Applications
Diverse Data Collector and Data Messenger
The SMARTCONTROL renders energy consumption measurable without delay in a detailed
fashion, and thus controllable. This, in turn, is the basic prerequisite for a great variety of
measures for the reduction of energy consumption and costs, for example with regard
to:
- Optimized utilization
- Contracting
- Component modernization
- Conversion
The SMARTCONTROL is an inexpensive, user-friendly, easy to integrate data logging
system. This is the prerequisite for quickly establishing efficient, sustainable, widespread
energy management for buildings and properties.
Amongst other data, the SMARTCONTROL is capable of recording the following:
- Meter readings (electrical power, heat, water, gas etc.)
- Temperatures (inside, outside, inlet, return etc.)
- Statuses (burner and pump on-times etc.)
- Analog signals from external signal converters and measuring transducers (pressure,
humidity etc.)
- M-Bus protocol (up to 450 meters), ModBus, SBus, CLBus, LON
One of the system’s important advantages is its ability to access all relevant data at any
t quickly and conveniently. ime –
We are at your disposal and can provide you with solutions if you want to make actual
energy consumption more transparent in the future, and optimize it as well.
Information regarding all facets of GMC-I Messtechnik GmbH, as well as other industry
information, can be accessed at:
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg, Germany
Phone: +49 (0) 911 8602-111
Fax: +49 (0) 911 8602-777
e-mail: info@gossenmetrawatt.com
Internet: www.gossenmetrawatt.com
Operating Instructions
3 -I Messtechnik GmbH GMC
Table of Contents
1 SMARTCONTROL Manager Software .............................................................. 5
1.1 Installation .................................................................................................... 5
1.2 Overview ....................................................................................................... 6
1.3 User Interface ............................................................................................... 6
Menu Bar ............................................................................................................. 6
Toolbar(s) ............................................................................................................ 7
Status Line 8..........................................................................................................
Scenario Browser .................................................................................................. 9
Network Toolbar ................................................................................................... 9
Data Toolbar ...................................................................................................... 10
OPC Server Toolbar ............................................................................................. 10
Toggle Tab Bars .................................................................................................. 10
Message Window ................................................................................................ 10
Numeric Format for Entering Values ....................................................................... 11
1.4 Entering Projects, Buildings and Devices With the Application Assistant .... 11
1.5 Entering Projects, Buildings and Devices Without the Application Assistant 12
1.6 The “Configuration” Tab .............................................................................. 16
TCP/IP ............................................................................................................... 16
Router ............................................................................................................... 16
e-mail Recipients ................................................................................................ 17
TCP/IP Recipients ................................................................................................ 17
Phone Recipients ................................................................................................. 18
Configuring Error Indication Tip: Refer to the online help as well! .............................. 19
Time ................................................................................................................. 21
Modem .............................................................................................................. 23
Information ........................................................................................................ 23
1.7 The “Calibration” Tab .................................................................................. 24
Temperature Sensor ............................................................................................ 24
A-D Converter .................................................................................................... 25
Meter (digital inputs) ........................................................................................... 26
Status (digital inputs) .......................................................................................... 28
Relay Start Status ............................................................................................... 28
Access Rights ..................................................................................................... 29
1.8 The “Programming” Tab, Commands ........................................................... 30
Program Priorities ............................................................................................... 33
Program Command Attributes in Tabular View ......................................................... 34
Finding Program Commands ................................................................................. 35
Transmitting Programs to the SMARTCONTROL and Starting Them ............................. 35
Restarting the SMARTCONTROL ............................................................................36
M-Bus Command Type ......................................................................................... 37
M-Bus Application Command Type ......................................................................... 39
Calculator Command Type .................................................................................... 41
Formula Calculator Command Type ........................................................................ 43
Timer Program Command Type ............................................................................. 46
Multifunctional Timer Command Type Tip: Refer to the online help as well! ................. 48
Power Calculator Command Type Tip: Refer to the online help as well! ..................... 50

Produktspecifikationer

Varumärke: Gossen Metrawatt
Kategori: Smarth hem
Modell: SMARTCONTROL

Behöver du hjälp?

Om du behöver hjälp med Gossen Metrawatt SMARTCONTROL ställ en fråga nedan och andra användare kommer att svara dig


Smarth hem Gossen Metrawatt Manualer

Gossen Metrawatt

Gossen Metrawatt SMARTCONTROL Bruksanvisning

20 September 2024

Smarth hem Manualer

Nyaste Smarth hem Manualer

Brilliant

Brilliant Nexus Home Ultimate 21465 Bruksanvisning

27 Oktober 2024
D-Link

D-Link DCS-8010 Bruksanvisning

21 Oktober 2024
Niko

Niko 350-20071 Bruksanvisning

18 Oktober 2024
Elro

Elro AB600S-2 Bruksanvisning

14 Oktober 2024
Tenda

Tenda SP15 Bruksanvisning

9 Oktober 2024
Eufy

Eufy Lumi Plug-in Night Light Bruksanvisning

6 Oktober 2024
ETiger

ETiger ES-D4A Bruksanvisning

3 Oktober 2024
Netgear

Netgear Orbi RBS50Y Bruksanvisning

2 Oktober 2024
Alecto

Alecto EUP-90W Bruksanvisning

2 Oktober 2024
Ezviz

Ezviz L2 Bruksanvisning

2 Oktober 2024