Harley Benton CLD-41S WN Bruksanvisning

Läs nedan 📖 manual på svenska för Harley Benton CLD-41S WN (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
2x2 CONTROLS
Waveforms
In 2x2, you have two song parts each with two
parallel tracks, for a total of four unique tracks.
SINGLE TAP:
Stop playback of all tracks
Resume playback of all
tracks
DOUBLE TAP:
Immediately stop playback
of all tracks
HOLD (when stopped) :
Delete everything and start
the song over
PLAY/STOP ALL
SINGLE TAP:
Change between song parts
HOLD:
Open the Mixer
NEXT PART
VOLUME WHEEL
Use the volume wheel to control the master
output volume at any time.
On-screen label text describes the SINGLE
TAP commands of the bottom three buttons
The thin bars on the right show the L and R
input volume levels. If the bars are red you
are clipping and you should lower the
volume of your instrument.
In the Mixer: You can use the volume
wheel to control the relative volume levels
of each track.
Currently recording new track
Currently selected layer
Layer is not selected
Currently recording
Layer is undone. Undone layer
can be brought back or overwritten
Muted track
Overdubs: You can have
unlimited overdubs, but
each new overdub will
merge the previous overdub
to the base layer. So you can
have at most two layers per
track -- your base layer and
your most recent overdub
layer.
For each track, the most
recent overdub is merged
with the base layer when the
song is saved. This frees up
internal memory.
BOTTOM TRACK (middle) & TOP TRACK (right)
SINGLE TAP:
Record (if track is blank)
Playback recording
Overdub
Playback overdub
DOUBLE TAP:
Mute
Single tap to unmute
HOLD:
Undo most recent layer
Continue to hold: undo 2nd layer
If all layers undone: single tap to
overwrite track
Redo most recent layer
Continue to hold: redo overdub
Page 1/2
6x6 CONTROLS
Track Clocks
In 6x6, you have six song parts each with six
parallel tracks, for a total of 36 unique tracks.
SINGLE TAP:
Stop playback of all tracks
Resume playback of all
tracks
DOUBLE TAP:
Immediately stop playback
of all tracks
HOLD (when stopped) :
Delete everything and start
the song over
PLAY/STOP ALL
SINGLE TAP:
Select next song part
Use Track Action button
to change to selected
song part
HOLD:
Open the Mixer
SELECT PART
VOLUME WHEEL
Use the volume wheel to control the master
output volume at any time.
The thin bars on the right show the L and R
input volume levels. If the bars are red you
are clipping and you should lower the
volume of your instrument.
In the Mixer: You can use the volume
wheel to control the relative volume levels
of each track.
SELECT TRACK TRACK ACTION
SINGLE TAP:
Record (if track or song part is blank)
Playback recording
Overdub
Playback overdub
DOUBLE TAP:
Mute
Single tap to unmute
HOLD:
Undo most recent layer
Continue to hold: undo 2nd layer
If all layers undone: tap to overwrite
track
Redo most recent layer
Continue to hold: redo overdub
SINGLE TAP:
Select next track
New track is currently being recorded
Currently selected track
Track is being overdubbed
Entire track is muted
Overdub is undone
All layers undone
Track not selected
On-screen label text describes the SINGLE
TAP commands of the bottom three buttons
Page 2/2

Produktspecifikationer

Varumärke: Harley Benton
Kategori: Inte kategoriserad
Modell: CLD-41S WN

Behöver du hjälp?

Om du behöver hjälp med Harley Benton CLD-41S WN ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Harley Benton Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer