Harman Kardon AVR 254 Bruksanvisning

Harman Kardon mottagare AVR 254

Läs nedan 📖 manual på svenska för Harman Kardon AVR 254 (76 sidor) i kategorin mottagare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/76

AVR 254

AUDIO/VIDEO RECEIVER

OWNER’S MANUAL

SAFETY INFORMATION

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. The A/V receiver’s cabinet may be cleaned by gently wiping with a soft cotton

or microfiber cloth. Do not use water or any liquid cleaners.

7. Do not block any of the ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding-

type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. When the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles and the point where they exit from the apparatus.

11. Only use the attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

Wet Location Marking

Apparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

Service Instructions

CAUTION – These servicing instructions are for use by qualified service personnel

only. To reduce the risk of electric shock, do not perform any servicing other than

that contained in the operating instructions, unless you are qualified to do so.

Outdoor Use Marking

WARNING – To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

Important Safety Information

Verify Line Voltage Before Use

Your AVR 254 has been designed for use with 120-volt AC current. Connection to

a line voltage other than that for which it is intended can create a safety and fire

hazard and may damage the unit.

If you have any questions about the voltage requirements for your specific model, or

about the line voltage in your area, contact your selling dealer before plugging the unit

into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not

recommend that extension cords be used with this product. As with all electrical

devices, do not run power cords under rugs or carpets or place heavy objects on

them. Damaged power cords should be replaced immediately by an authorized service

center with a cord meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug; never

pull the cord. If you do not intend to use the unit for any considerable length of time,

disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet

may present a shock hazard, and any modification to the product will void your

guarantee. If water or any metal object such as a paper clip, wire or staple acciden-

tally falls inside the unit, disconnect it from the AC power source immediately, and

consult an authorized service center.

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be certain that it is

grounded so as to provide some protection against voltage surges and static charges.

Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides

information with

respect to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna

discharge unit, size of grounding conduc-

tors, location of antenna discharge unit,

connection to grounding electrodes and

requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV

(cable TV) system installer’s attention to article 820-40 of the NEC, which provides

guidelines for proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close to the point

of cable entry as possible.

Installation Location

• To ensure proper operation and to avoid the potential for safety hazards, place the

unit on a firm and level surface. When placing the unit on a shelf, be certain that

the shelf and any mounting hardware can support the weight of the product.

• Make certain that proper space is provided both above and below the unit for

ventilation. If this product will be installed in a cabinet or other enclosed area,

make certain that there is sufficient air movement within the cabinet. Under some

circumstances, a fan may be required.

• Do not place the unit directly on a carpeted surface.

• Avoid installation in extremely hot or cold locations, or in an area that is exposed

to direct sunlight or heating equipment.

• Avoid moist or humid locations.

• Do not obstruct the ventilation slots on the top of the unit, or place objects

directly over them.

• Due to the weight of the AVR 254 and the heat generated by the amplifiers,

there is the remote possibility that the rubber padding on the bottom of the

unit’s feet may leave marks on certain wood or veneer materials. Use caution

when placing the unit on soft woods or other materials that may be damaged

by heat or heavy objects. Some surface finishes may be particularly sensitive to

absorbing such marks, due to a variety of factors beyond our control, including

the nature of the finish, cleaning materials used, and normal heat and vibration

caused by the use of the product, or other factors. We recommend that caution

be exercised in choosing an installation location for the component and in normal

maintenance practices, as your warranty will not cover this type of damage to furniture.

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only after

unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy

water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth.

NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning

agent. Do not use abrasive cleaners, as they may damage the finish of metal parts.

Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords

with other components, and make certain that you disconnect the unit from

the AC outlet.

Important Information for the User

This equipment has been tested and found to comply with the limits for a Class-B

digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to pro-

vide reasonable protection against harmful interference in a residential installation.

This equipment generates,

uses and can radiate radio-frequency energy

and, if not

installed and used in accordance with the instructions, may cause harmful interfer-

ence to radio communication. However, there is no guarantee that harmful interfer-

ence will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept interference received, including interference that may

cause undesired operation.

NOTE: Changes or modifications may cause this unit to fail to comply with Part

of the FCC Rules and may void the user’s authority to operate the equipment.

Unpacking

The carton and shipping materials used to protect your new receiver during ship-

ment were specially designed to cushion it from shock and vibration. We suggest

that you save the carton and packing materials for use in shipping if you move, or

should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is done

by carefully slitting the tape seams on the bottom and collapsing the carton. Other card-

board inserts may be stored in the same manner. Packing materials that cannot be col-

lapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and

other sections of the shipping protection are recyclable. Please

respect the environ-

ment and discard those materials at a local recycling center.

It is important that you remove the protective plastic film from the front-panel lens.

Leaving the film in place will affect the performance of your remote control.

SAFETY INFORMATION

Produktspecifikationer

Varumärke:	Harman Kardon
Kategori:	mottagare
Modell:	AVR 254

Behöver du hjälp?

Om du behöver hjälp med Harman Kardon AVR 254 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mottagare Harman Kardon Manualer

Harman Kardon AVR 300 Bruksanvisning

2 Oktober 2024

Harman Kardon AVR 230C Bruksanvisning

26 Augusti 2024

Harman Kardon AVR 254 Bruksanvisning

26 Augusti 2024

Harman Kardon HK 3770 Bruksanvisning

25 Augusti 2024

Harman Kardon AVR 1610 Bruksanvisning

20 Augusti 2024

Harman Kardon AVR 5000 Bruksanvisning

19 Augusti 2024

Harman Kardon AVR 3550HD Bruksanvisning

15 Augusti 2024

Harman Kardon HK3270 Bruksanvisning

13 Augusti 2024

Harman Kardon HK 3480 Bruksanvisning

11 Augusti 2024

Harman Kardon AVR 151S Bruksanvisning

10 Augusti 2024

mottagare Manualer

Nyaste mottagare Manualer

Speco Technologies PBM120AT Bruksanvisning

27 Oktober 2024

Fosi Audio V3 Bruksanvisning

26 Oktober 2024

Jensen CAR710-4BC Bruksanvisning

26 Oktober 2024

Onkyo TX-RZ830 Bruksanvisning

24 Oktober 2024

Pioneer VSX-1122K Bruksanvisning

22 Oktober 2024

NAD C 355BEE Bruksanvisning

21 Oktober 2024

Yamaha HTR-5072 Bruksanvisning

21 Oktober 2024

Yamaha RX-A810 Bruksanvisning

20 Oktober 2024

Sherwood R-607 Bruksanvisning

20 Oktober 2024

Denon AVC-S660H Bruksanvisning

19 Oktober 2024