Hawke Nite-Eye 2000 Bruksanvisning

Hawke Inte kategoriserad Nite-Eye 2000

Läs nedan 📖 manual på svenska för Hawke Nite-Eye 2000 (13 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/13
NITE-EYE 2000
3
OVERVIEW
• The Hawke Nite-Eye 2000 digital camera can be used for observation and photo/video capture in
complete darkness or low light conditions.
• View up to 200 meters in complete darkness using digital night vision technology.
• A built-in infrared illuminator provides additional light when in darker conditions. The infrared
strength can be adjusted to suit your situation.
• Quick and easy transfer of photos/videos and battery recharge via USB.
• Rechargeable 18650 lithium battery for extended performance and runtime.
BATTERY INSTALLATION
Unscrew the battery cover located underneath the front lens. Insert a 18650 battery, negative end
rst, then screw the battery cover back in place.
Notes:
• Only use 3.7V 18650 rechargeable batteries.
• Ensure the battery has sufcient charge.
• Ensure battery has been inserted negative end rst.
• Ensure the battery is charged before rst use to increase life expectancy.
4
RECHARGING
The Nite-Eye 2000 is powered by a 18650 lithium battery. The battery can either be recharged in
the Nite-Eye 2000 unit, or separately if using a battery charger (not supplied).
• To charge the battery while installed in the camera, connect the power adaptor to the USB cable
and insert this into the mini-USB socket on the Nite-Eye 2000, located on the underside of the
unit, beneath the rubber ap.
• The LED charging indicator next to the mini-USB socket will glow red while the battery is
charging and turn off when it is fully charged.
• When recharging from mains power supply the Nite-Eye 2000 will automatically power on. If not
needed, the camera can be powered off by pressing and holding the “ON/OK” button for 3 seconds.
• The Nite-Eye 2000 can also be charged by connecting directly to a computer via USB. In this
mode data transfer will also be available.
MEMORY CARD INSTALLATION
• The Nite-Eye 2000 accepts micro SD memory cards only.
• Memory card capacity between 2GB-32GB only.
• Install the micro SD memory card into the memory card socket located on the underside of the
unit, beneath the rubber ap.
• Install micro SD memory card with exposed contacts rst and facing outwards.

Produktspecifikationer

Varumärke: Hawke
Kategori: Inte kategoriserad
Modell: Nite-Eye 2000

Behöver du hjälp?

Om du behöver hjälp med Hawke Nite-Eye 2000 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Hawke Manualer

Hawke

Hawke Nite-Eye 2000 Bruksanvisning

23 September 2024
Hawke

Hawke Vantage Bruksanvisning

23 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024