Hikoki CR 13VEY Bruksanvisning

Hikoki Inte kategoriserad CR 13VEY

Läs nedan 📖 manual på svenska för Hikoki CR 13VEY (152 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/152

Handling instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

Instrucciones de manejo

Instruções de uso

Bruksanvisning

Brugsanvisning

Bruksanvisning

Käyttöohjeet

Οδηγίες χειρισμού

Instrukcja obsługi

Kezelési utasítás

Návod k obsluze

Kullanım talimatları

Instrucţiuni de utilizare

Navodila za rokovanje

Pokyny na manipuláciu

Инструкция за експлоатация

Uputstvo za rukovanje

Upute za rukovanje

CR 13VEY

ﬁ

English

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ -position before connecting

to power source and/or battery pack, picking up

or carrying the tool.

Carrying power tools with your ﬁ nger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.

Loose clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

h) Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles.

A careless action can cause severe injury within a

fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and safer

at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and oﬀ .

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may aﬀ ect the power tool s operation. If ʼ

damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations diﬀ erent from

those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease.

Slippery handles and grasping surfaces do not

allow for safe handling and control of the tool in

unexpected situations.

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING

Read all safety warnings, instructions, illustrations and

speciﬁ cations provided with this power tool.

Failure to follow all instructions listed below may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂ ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools.

Unmodiﬁ ed plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂ uence of drugs, alcohol or

medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such as a dust mask, non-skid

safety shoes, hard hat or hearing protection used for

appropriate conditions will reduce personal injuries.

(Original instructions)

English

5) Service

a) Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and inﬁ rm persons away.

When not in use, tools should be stored out of reach of

children and inﬁ rm persons.

RECIPROCATING SAW SAFETY

WARNINGS

1. Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord.

Cutting accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and could

give the operator an electric shock.

2. Use clamps or another practical way to secure and

support the workpiece to a stable platform.

Holding the workpiece by hand or against your body

leaves it unstable and may lead to loss of control.

ADDITIONAL SAFETY WARNINGS

1. Preparing and checking the work environment. Make

sure that the work site meets all the conditions laid forth

in the precautions.

2. Ensure that the power source to be utilized conforms

to the power requirements speciﬁ ed on the product

nameplate.

3. Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, which could cause a serious

accident.

4. When the work area is removed from the power source,

use an extension cord of suﬃ cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

5. Prior to cutting into walls, ceilings or ﬂ oors, ensure there

are no electric cables or conduits inside.

6. Dust produced in operation

The dust produced in normal operation may aﬀ ect the

operator’s health. To wear a dust mask is recommended.

7. When using this unit continuously, the unit may overheat,

leading to damage in the motor and switch. Therefore,

whenever the housing becomes hot, give the saw a

break for a while.

8. If the machine is used continuously at minimum speed,

an extra load is applied to the motor which can result in

motor seizure. Always operate the power tool so that

the blade is not caught by the material during operation.

Always adjust the blade speed to enable smooth cutting.

9. Always hold the body handle and front cover of the

power tool ﬁ rmly. Otherwise the counterforce produced

may result in inaccurate and even dangerous operation.

10. Mounting the blade ( )Fig. 5

This unit employs a detachable mechanism that enables

mounting and removal of saw blades without the use of a

wrench or other tools.

○ Turn oﬀ the switch and unplug the power cord.

Be absolutely sure to keep the switch turned oﬀ and the

power cord unplugged to prevent any accident.

○ Pull the back of the saw blade two or three times by hand

and check that the blade is securely mounted. When

pulling the blade, you will know it is properly mounted if it

clicks and the lever moves slightly.

○ When pulling the saw blade, be absolutely sure to pull it

from the back. Pulling other parts of the blade will result

in an injury.

11. Maintenance and inspection of saw blade mount

○ After use, blow away sawdust, earth, sand, moisture,

etc., with air or brush them away with a brush, etc., to

ensure that the blade mount can function smoothly.

○ As shown in , carry out lubrication around the Fig. 14

blade holder on a periodic basis by use of cutting ﬂ uid,

etc.

○ Continued use of the tool without cleaning and lubricating

the area where the saw blade is installed can result in

some slack movement of the lever due to accumulated

sawdust and chips. Then, clean up the inside of the

blade holder with air and the like and carry out suﬃ cient

lubrication.

○ Do not use any saw blade with a worn-out blade hole

(A). Otherwise, the saw blade can come oﬀ , resulting in

personal injury. ( )Fig. 1

12. Adjusting the swing cutting operation

○ Even for soft materials, you should perform straight

cutting if you wish to make curved or clean cuts.

○ Dust and dirt accumulated on the change lever

section can degrade the function of the change lever.

Periodically clean the change lever section.

○ When performing swing cutting, use a saw with straight

blade. If a saw with curved blade is used, the saw blade

may be broken or the unit may be damaged.

13. How to use

○ Avoid carrying it plugged to the outlet with your ﬁ nger on

the switch. A sudden startup can result in an unexpected

injury.

○ Be careful not to let sawdust, earth, moisture, etc., enter

the inside of the machine through the plunger section

during operation. If sawdust and the like accumulate in

the plunger section, always clean it before use.

○ Do not remove the front cover. Hold ﬁ rmly the front cover

by hand to operate. But, do not extend your hand or

ﬁ nger beyond the ﬂ ange of front cover to avoid an injury.

○ During use, press the base against the material while

cutting.

Vibration can damage the saw blade if the base is not

pressed ﬁ rmly against the workpiece.

Furthermore, a tip of the saw blade can sometimes

contact the inner wall of the pipe, damaging the saw blade.

○ Select a saw blade of the most appropriate length.

Ideally, the length protruding from the base of the saw

blade after subtracting the stroke quantity should be

larger than the material (see ).Fig. 10

If you cut a large pipe, large block of wood, etc., that

exceeds the cutting capacity of a blade; there is a risk

that the blade may contact with the inner wall of the pipe,

wood, etc., resulting in damage.

○ ﬃ To maximize cutting e ciency for the materials you are

using and working conditions, adjust the speed of the

saw blade and the switching to swing cutting.

Cutting

○ Press the base ﬁ rmly against the workpiece.

○ Never apply any unreasonable force to the saw blade

when cutting. Doing so can easily break the blade.

○ Fasten a workpiece ﬁ rmly before operation. (Fig. 11)

○ When cutting metallic materials, use proper machine

oil (turbine oil, etc.). When not using liquid machine oil,

apply grease over the workpiece.

The service life of the saw blade will be drastically

shortened if you don’t use machine oil.

○ Never apply any unreasonable force to the saw blade

when cutting. Also remember to press the base against

the lumber ﬁ rmly.

Sawing curved lines

○ We recommend that you use the BI-METAL blade

mentioned in for the saw blade since it is tough Table 2

and hardly breaks.

Produktspecifikationer

Varumärke:	Hikoki
Kategori:	Inte kategoriserad
Modell:	CR 13VEY
Färg på produkten:	Black, Grey
Vikt:	9.5 g
Bredd:	20.5 mm
Djup:	64.7 mm
Höjd:	11.5 mm
Anslutningsteknik:	Draadloos
Ethernet LAN:	Nee
Antal USB-anslutningar:	1
Certifiering:	FCC, CE
Gränssnitt:	WLAN
Wifi-band:	Single-band (2.4 GHz)
Mottagarens känslighet:	- 11b 11Mpbs :-76dBm\n- 11g 54Mpbs :-65dBm\n- 11n-HT20 72.22Mpbs :-62dBm\n- 11n-HT40 150Mpbs :-59dBm
Nätverksstandard:	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Säkerhetsalgoritmer som stöds:	128-bit WEP, 64-bit WEP, WPA, WPA2
Uteffekt:	20 - 23dBm +/-1
Förvaringstemperatur:	-20 - 70 °C
Internera:	Nee
Kompatibla operativsystem:	- Windows 2000, XP, Vista\n- Mac OSX\n- Linux
Förvaringsfuktighet:	5 - 90 procent
Frekvensomfång:	2.412 - 2.472 GHz
Nätverksfunktioner:	Fast Ethernet
Spännande:	5 V
Värdgränssnitt:	USB
Maximal dataöverföringshastighet:	150 Mbit/s
Trådlösa anslutningar:	Ja
Dataöverföringshastigheter som stöds:	150, 72.22, 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Antal kanaler:	13 kanalen
Komponent för:	PC/notebook
Drifttemperatur (TT):	0 - 45 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent
Förstärkning:	5 dBi