Hikoki D13VG Bruksanvisning

Hikoki Borrmaskin D13VG

Läs nedan 📖 manual på svenska för Hikoki D13VG (13 sidor) i kategorin Borrmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/13
DRILL
MODEL D 10VF •D 10VG
D 13VF •D 13VG
HANDLING INSTRUCTIONS
NOTE:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available as
an important reference when using this power tool.
D13VF
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust.
Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning the
power tool on.
A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at
all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the job better and safer at
the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it
on and off.
Any power tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of children
and infirm persons.
3
DRILL SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool
"live" and could give the operator an electric shock.
Model D10VF D10VG D13VF D13VG
Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power input 710W*
No load speed 0–3,000/min 0–1,200/min 0–850/min 0–600/min
Drill chuck capacity 10 mm 13 mm
Steel Twist Bit 10 mm 10 mm 13 mm 13 mm
Hole Saw – 38 mm 51 mm 70 mm
Capacity Flat Spade Bit 25 mm 32 mm 40 mm 40 mm
Wood Auger Bit – – 32 mm 38 mm
Hole Saw 29 mm 70 mm 102 mm 114 mm
Weight (without cord)
Spec. for keyed chuck 1.8 kg 1.9 kg 2.1 kg 2.1 kg
Spec. for keyless chuck 1.8 kg 1.9 kg 2.0 kg 2.0 kg
SPECIFICATIONS
*Be sure to check the nameplate on product as it is subject to change by areas.
<Capacity with Angle attachment (Optional accessory for D13VF and D13VG)>
Model D13VF D13VG
Speed of angle unit LOW(650/min) HIGH(1350/min) LOW(400/min) HIGH(900/min)
Steel Twist Bit 13 mm 13 mm 13 mm 13 mm
Hole Saw 64 mm 32 mm 70 mm 51 mm
Capacity Flat Spade Bit 40 mm 32 mm 40 mm 40 mm
Wood Auger Bit 38 mm 29 mm 38 mm 32 mm
Hole Saw 114 mm 64 mm 114 mm 102 mm
STANDARD ACCESSORIES
<D10VF>
(1) Chuck wrench (Spec. only for keyed chuck) ......1
<D10VG and D13VF>
(1) Side handle ................................................................ 1
(2)Chuck wrench (Spec. only for keyed chuck) ........1
<D13VG> <D13VF for Australia>
(1) Side handle ................................................................ 1
(2) Handle joint ................................................................1
(3) Chuck wrench (Spec. only for keyed chuck) ......1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
<D10VF>
(1) Side handle ................................................................ 1
(2) Hook (A) ..................................................................... 1
<D10VG>
(1) Hook (A) ..................................................................... 1
<D13VF and D13VG>
(1) Hook (A) ..................................................................... 1
(2) Angle attachment ...................................................... 1
Optional accessories are subject to change without notice.
APPLICATIONS
䡬Boring holes in metal, wood, and plastic.
3. Do not wear gloves made of stuff liable to roll
up such as cotton, wool, cloth or string, etc.
4. Prior to drilling into walls, ceilings or floors, ensure
there are no electric cables or conduits inside.

Produktspecifikationer

Varumärke: Hikoki
Kategori: Borrmaskin
Modell: D13VG

Behöver du hjälp?

Om du behöver hjälp med Hikoki D13VG ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Hikoki Manualer

Hikoki

Hikoki DH28PCY2 Bruksanvisning

8 December 2024
Hikoki

Hikoki DH26PC2 Bruksanvisning

8 December 2024
Hikoki

Hikoki DV36DA Bruksanvisning

8 December 2024
Hikoki

Hikoki DV18DC Bruksanvisning

17 September 2024
Hikoki

Hikoki D 13VG Bruksanvisning

14 September 2024
Hikoki

Hikoki D13VG Bruksanvisning

14 September 2024
Hikoki

Hikoki DV16VSS Bruksanvisning

14 September 2024
Hikoki

Hikoki DV3620DA Bruksanvisning

14 September 2024
Hikoki

Hikoki DS36DC Bruksanvisning

14 September 2024
Hikoki

Hikoki B16RM Bruksanvisning

14 September 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Worx

Worx WX956L Bruksanvisning

11 December 2024
Einhell

Einhell BT-RH 900 Bruksanvisning

9 December 2024
Einhell

Einhell BT-RH 850 Bruksanvisning

9 December 2024
Einhell

Einhell RT-RH 24 Bruksanvisning

9 December 2024
Einhell

Einhell BT-RH 920 Bruksanvisning

9 December 2024
Einhell

Einhell 4132720 Bruksanvisning

9 December 2024
Einhell

Einhell RT-ID 75/1 Bruksanvisning

9 December 2024
Einhell

Einhell YPL 800 Bruksanvisning

9 December 2024
Einhell

Einhell TH-ID 720 E Bruksanvisning

9 December 2024
Einhell

Einhell YPL 652 Bruksanvisning

9 December 2024