Hikoki DS14DBL2 Bruksanvisning

Hikoki Borrmaskin DS14DBL2

Läs nedan 📖 manual på svenska för Hikoki DS14DBL2 (60 sidor) i kategorin Borrmaskin. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/60

Handling instructions

使用說明書

취급 설명서

Hướng dẫn sử dụng

คูมือการใชงาน

Petunjuk pemakaian

DS18DBL2 DV18DBL2

DS14DBL2 • DS18DBL2

DV14DBL2 • DV18DBL2

English

power source and/or battery pack, picking up or

carrying the tool.

Carrying power tools with your ﬁ nger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and safer

at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and oﬀ .

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀ ect the

power tool s operation.ʼ

If damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations diﬀ erent from

those intended could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger speciﬁ ed by the

manufacturer.

A charger that is suitable for one type of battery pack

may create a risk of ﬁ re when used with another

battery pack.

b) Use power tools only with speciﬁ cally

designated battery packs.

Use of any other battery packs may create a risk of

injury and ﬁ re.

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂ ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools.

Unmodiﬁ ed plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂ uence of drugs, alcohol or

medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ position before connecting to

English

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause

burns or a ﬁ re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, ﬂ ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

6) Service

a) Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and inﬁ rm persons away.

When not in use, tools should be stored out of reach of

children and inﬁ rm persons.

CORDLESS DRIVER DRILL / IMPACT

DRIVER DRILL SAFETY WARNINGS

1. Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

1. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

2. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory or fastener may contact hidden wiring.

Cutting accessory and fasteners contacting a "live" wire

may make exposed metal parts of the power tool "live"

and could give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Make sure that the area to be drilled is absolutely free

of any hidden obstructions including electrical wiring,

water, or gas pipes. Drilling into the aforementioned may

result in electric shock or short circuit, gas leak or other

hazards that can cause serious accidents or injuries.

2. When using the tool, make sure the side handle is

attached and ﬁ rmly secured.

If not ﬁ rmly secured, the tool may jerk out of position

when overburdened, resulting in injury.

Tighten the side handle so that the protrusion of the

handle points towards the upper surface of the unit.

( )Fig. 3-b

Prior to use, always make sure that the side handle is not

loose.

If the handle loosens during use, tighten it further.

3. During operation, make sure to ﬁ rmly hold the tool’s

handle and side handle with both hands. Failure to do so

may result in injury.

4. Secure the workpiece. A workpiece clamped with

clamping devices or in a vice is held more secure than

by hand.

5. Setting up and checking the work environment. Check

if the work environment is suitable by following the

precaution.

6. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

7. Never disassemble the rechargeable battery and

charger.

8. Never short-circuit the rechargeable battery.

Shortcircuiting the battery will cause a great electric

current and overheat. It results in burn or damage to the

battery.

9. Do not dispose of the battery in ﬁ re. If the battery is burnt,

it may explode.

10. Bring the battery to the shop from which it was purchased

as soon as the post-charging battery life becomes too

short for practical use. Do not dispose of the exhausted

battery.

11. Do not insert object into the air ventilation slots of the

charger. Inserting metal objects or inﬂ ammables into the

charger air ventilation slots will result in electrical shock

hazard or damaged charger.

12. When mounting a bit into the keyless chuck, tighten the

sleeve adequately. If the sleeve is not tight, the bit may

slip or fall out, causing injury.

13. When changing the rotational speed with the shift knob,

conﬁ rm that the switch is oﬀ . Changing the speed while

the motor is rotating will damage the gears.

14. The clutch dial cannot be set between the numerals "1,

4, 7 … 22" or the dots, and do not use with the clutch dial

numeral between "22" and the line at the middle of the

drill mark. Doing so may cause damage.

15. Always use this unit with clockwise rotation, when using

it as impact drill.

16. Resting the unit after continuous work.

17. The power tool is equipped with a temperature

protection circuit to protect the motor. Continuous work

may cause the temperature of the unit to rise, activating

the temperature protection circuit and automatically

stopping operation. If this happens, allow the power tool

to cool before resuming use.

18. The motor may stop in the event the tool is overloaded. In

this should occur, release the tool’s switch and eliminate

the cause of the overload.

Avoid touching the front case which can heat up during

continuous operation.

19. The motor rotation may be locked to cease while the unit

is used as drill. While operating the driver drill, take care

not to lock the motor.

20. The use of the battery in a cold condition (below 0 degree

Centigrade) can sometimes result in the weakened

tightening torque and reduced amount of work. This,

however, is a temporary phenomenon, and returns to

normal when the battery warms up.

21. Install securely the hook. Unless the hook is securely

installed, it may cause an injury while using.

When electing to carry the tool hooked to your hip belt,

make sure to detach the tool bit and side handle. Failure

to do so may result in unexpected injury.

22. Do not look directly into the light. Such actions could

result in eye injury.

Wipe oﬀ any dirt or grime attached to the lens of the LED

light with a soft cloth, being careful not to scratch the

lens.

Scratches on the lens of the LED light can result in

decreased brightness.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips with the

protection function to stop the output.

In the cases of 1 to 3 described below, when using this

product, even if you are pulling the switch, the motor may stop.

This is not the trouble but the result of protection function.

1. When the battery power remaining runs out, the motor

stops.

In such a case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In this

case, release the switch of tool and eliminate causes of

overloading. After that, you can use it again.

Produktspecifikationer

Varumärke:	Hikoki
Kategori:	Borrmaskin
Modell:	DS14DBL2

Behöver du hjälp?

Om du behöver hjälp med Hikoki DS14DBL2 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Borrmaskin Hikoki Manualer

Hikoki DH28PCY2 Bruksanvisning

8 December 2024

Hikoki DH26PC2 Bruksanvisning

8 December 2024

Hikoki DV36DA Bruksanvisning

8 December 2024

Hikoki DV18DC Bruksanvisning

17 September 2024

Hikoki D 13VG Bruksanvisning

14 September 2024

Hikoki D13VG Bruksanvisning

14 September 2024

Hikoki DV16VSS Bruksanvisning

14 September 2024

Hikoki DV3620DA Bruksanvisning

14 September 2024

Hikoki DS36DC Bruksanvisning

14 September 2024

Hikoki B16RM Bruksanvisning

14 September 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Metabo PowerMaxx BS 12 BL Bruksanvisning

9 Januari 2025

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025

Holzmann SB 4116HN Bruksanvisning

7 Januari 2025

Bavaria BCD 12/1 Bruksanvisning

7 Januari 2025

Einhell BT-ID 710 E Bruksanvisning

7 Januari 2025

DeWalt DCB126 Bruksanvisning

6 Januari 2025

MSW -DMS400 Bruksanvisning

5 Januari 2025

DeWalt DCD1624 Bruksanvisning

3 Januari 2025

DeWalt DW9106 Bruksanvisning

31 December 2025

Gude GTB 16/12 R+L Bruksanvisning

31 December 2025