Hikoki PU-PM3 Bruksanvisning

Hikoki Borrmaskin PU-PM3

Läs nedan 📖 manual på svenska för Hikoki PU-PM3 (20 sidor) i kategorin Borrmaskin. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/20
Drill
Taladro
手提電鑽
สวานไฟฟา
Read through carefully and understand these instructions before use.
Leer cuidadosamente y comprender estas instrucciones antes del uso.
使用前務請詳加閱讀
โปรดอานโดยละเอียดและทําความเขาใจกอนใชงาน
PU – PM3
Handling instructions
Instrucciones de manejo
使用說明書
คูมือการใชงาน
1
English Español 中國語
1Gear cover Cubierta de engranajes 齒輪罩
2Stopper Tope 停止器
3Wing bolt Perno de ala 蝶形螺栓
4Hole depth Profundidad de orifi cio 孔深
5Wear limit Límite de desgaste 磨損極限
6No. of carbon brush N° de escobilla de carbón 碳刷號
7Brush cap Tapón de cepillo 碳刷蓋
1
3
2
ไทย
1ครอบเฟอง
2สต็อปเปอร
3โบลตปกผีเสื้อ
4ความลึกของรู
5ขอบเขตระยะสึกหรอ
6จํานวนแปรงถาน
7ฝาแปรงถาน
1
2
3
5
6
4
7
GENERAL SAFETY RULES
WARNING!
Read all instructions
Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
The term ”power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
of fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the infl uence of drugs, alcohol or
medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use safety equipment. Always wear eye
protection.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the switch is in
the off position before plugging in.
Carrying power tools with your fi nger on the
switch or plugging in power tools that have the switch
on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of these devices can reduce dust related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may aff ect the power
tools operation.
If damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations diff erent from
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool
is maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
English
2

Produktspecifikationer

Varumärke: Hikoki
Kategori: Borrmaskin
Modell: PU-PM3

Behöver du hjälp?

Om du behöver hjälp med Hikoki PU-PM3 ställ en fråga nedan och andra användare kommer att svara dig


Borrmaskin Hikoki Manualer

Hikoki

Hikoki DH28PCY2 Bruksanvisning

8 December 2024
Hikoki

Hikoki DH26PC2 Bruksanvisning

8 December 2024
Hikoki

Hikoki DV36DA Bruksanvisning

8 December 2024
Hikoki

Hikoki DV18DC Bruksanvisning

17 September 2024
Hikoki

Hikoki D 13VG Bruksanvisning

14 September 2024
Hikoki

Hikoki D13VG Bruksanvisning

14 September 2024
Hikoki

Hikoki DV16VSS Bruksanvisning

14 September 2024
Hikoki

Hikoki DV3620DA Bruksanvisning

14 September 2024
Hikoki

Hikoki DS36DC Bruksanvisning

14 September 2024
Hikoki

Hikoki B16RM Bruksanvisning

14 September 2024

Borrmaskin Manualer

Nyaste Borrmaskin Manualer

Bosch

Bosch GRC 12V-60 Professional Bruksanvisning

12 Mars 2025
Worx

Worx WX130L.9 Bruksanvisning

25 Februari 2025
Bosch

Bosch GBH 18V-18 Professional Bruksanvisning

6 Februari 2025
Metabo

Metabo PowerMaxx BS 12 BL Bruksanvisning

9 Januari 2025
Makita

Makita HR2631FTX4 Bruksanvisning

8 Januari 2025
Holzmann

Holzmann SB 4116HN Bruksanvisning

7 Januari 2025
Bavaria

Bavaria BCD 12/1 Bruksanvisning

7 Januari 2025
Einhell

Einhell BT-ID 710 E Bruksanvisning

7 Januari 2025
DeWalt

DeWalt DCB126 Bruksanvisning

6 Januari 2025
MSW

MSW -DMS400 Bruksanvisning

5 Januari 2025