Hikoki VTP-16A Bruksanvisning

Hikoki Borrmaskin VTP-16A

Läs nedan 📖 manual på svenska för Hikoki VTP-16A (9 sidor) i kategorin Borrmaskin. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/9

VTV-16

Impact Drill

Model VTP-16A • VTV-16

Handling instructions

Note:

Before using this Electric Power Tool, carefully read through these

HANDLING INSTRUCTIONS to ensure eﬃ cient, safe operation. It is

recommended that these INSTRUCTIONS be kept readily available as

an important reference when using this power tool.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂ ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools.

Unmodiﬁ ed plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk of

electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂ uence of drugs, alcohol or

medication.

A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ -position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools with your ﬁ nger on the switch

or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part of

the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust related

hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and oﬀ .

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀ ect the

power tool's operation.

If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed.

Use of the power tool for operations diﬀ erent from

those intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and inﬁ rm persons away.

When not in use, tools should be stored out of reach

of children and inﬁ rm persons.

IMPACT DRILL SAFETY WARNINGS

1. Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

SPECIFICATIONS

Model VTP-16A VTV-16

Voltage (by areas)* (110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)

Power input 800 W*

Speed change 1 2 3 4

No load speed 700 /min 1400 /min 0 – 800 /min 0 – 1600 /min

Capacity Steel 16 mm 10 mm 16 mm 10 mm

Concrete 35 mm 16 mm 35 mm 16 mm

Weight (without cord) 3.8 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Chuck wrench ..............................................................1

(2) Side handle .................................................................. 1

(3) Depth stopper ...............................................................1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

○ Drill Bit for concrete

O.D Length Code No.

6.5mm 100mm 931851

8.0 100 931852

9.5 120 931853

10.0 120 931854

12.0 160 971704

13.0 160 931855

14.3 160 931776

16.0 160 971670

19.0 160 931856

Optional accessories are subject to change without notice.

APPLICATIONS

○ By combined actions of ROTATION and IMPACT:

Boring holes in hard materials (concrete, marble,

granite, tiles, etc.)

○ By ROTATIONAL action:

Boring holes in metal, wood and plastic.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements speciﬁ ed on the product

nameplate.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord.

Cutting accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and could

give the operator an electric shock.

4. Before drilling into a wall, ﬂ oor or ceiling, thoroughly

conﬁ rm that no items such as electric cables or conduits

are buried inside.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, inviting serious accident.

3. Extension cord

When the work area is removed from the power source,

use an extension cord of suﬃ cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

4. Fitting the drill bit

Fit the drill bit into the chuck and use the chuck

wrench to secure it, tightening the chuck by each

of the three holes in turn.

5. Selecting the appropriate drill bit

○ When boring concrete or stone

Use the drill bits speciﬁ ed in the Optional Accessories.

○ When boring metal or plastic

Use an ordinary metalworking drill bit.

○ When boring wood

Use an ordinary woodworking drill bit.

However, when drilling 6.5 mm or smaller holes, use a

metalworking drill bit.

6. High-speed/Low-speed changeover:

Prior to changing speed, ensure that the switch is in

the OFF position, and the drill has come to a complete

stop. To change speed, depress the shift Iock and

slide it in the appropriate direction, as indicated by the

arrow in Fig. 1. The numeral “1” engraved in the drill

body denotes low speed, the numeral “2” denotes high

speed.

Gear cover

Shift lock

(push and slide)

1 2

Fig. 1

Produktspecifikationer

Varumärke:	Hikoki
Kategori:	Borrmaskin
Modell:	VTP-16A
Färg på produkten:	Black, White
Vikt:	38000 g
Bredd:	530 mm
Djup:	1200 mm
Höjd:	1570 mm
Antal program:	12
Snäll:	Magnetische crosstrainer
AC-ingångsspänning:	230 V
AC-ingångsfrekvens:	50 Hz
Transport wielen:	Ja
Träningsparametrar visas:	Calories, Distance, Recovery pulse rate, Speed, Time
Max användarvikt:	130 kg
Svänghjulets vikt:	16000 g
Pulsmätare som tillval:	Handgreepsensoren
Kör system:	V-riem
Justerbara fotplattor:	Ja
Standard pulsmätare:	Handgreepsensoren
Typ av utbildningsupplägg:	Toerentalafhankelijke regeling
Antal motstånd:	16
Antal funktioner som visas:	5
Signal övre pulsgräns:	Ja