Hinkley Lighting Hampton 3211AN-LED Bruksanvisning

Hinkley Lighting Lättnad Hampton 3211AN-LED

Läs nedan 📖 manual på svenska för Hinkley Lighting Hampton 3211AN-LED (2 sidor) i kategorin Lättnad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
a embly instruct nsss io
Family: Hampton Item No. 3211
1. Find a clear area in which you can work.
1. Attach acrylic lens assembly by threading coupler onto end of lower upright (1) (2)
stems - see .(3) Drawings 1 and 2
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body structure, installing the mounting hardware to the junction box,
mounting the fixture to the ceiling and then installing the shade.
start here
3211
8.31.09
3
Drawing 1 - Fixtu
Drawing 2 - Fixture Assembly
Drawing 3 - Mounting Instructions
re Assembly
A
1
2
1
B
C
4
31. Fasten mounting strap to outlet box with the original outlet box screws - (B) (A) (C)
see .Drawing 3
2. Thread nipple into mounting strap approximately 3/8” .(D) (B)
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet and follow all instructions to make all necessary wiring connections. (I.S. 18)
Then refer back to this page to continue installation of this fixture.
4
5
6
1. Slip canopy over nipple and up against ceiling - see .(E) (D) Drawing 3
2. Thread decorative finial onto end of nipple (F) (D).
1. Fixture can now be lamped accordingly.
2. Slip shade onto acrylic assembly (4) (1) Drawing 2- see .
F
ED
T24 JA8-2016
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.co
I.S. 18 wiri roun g n onsng g din i st ctiru
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
w t t siring ins ruc ion
Indoor Fixtures
1. Connect positive supply wire (A) (typically black or the smooth, unmarked
side of the two-conductor cord) to positive fixture lead with appropriately (B)
sized twist on connector - see .Drawings 1 or 2
2. Connect negative supply wire (typically white or the ribbed, marked (C)
side of the two-conductor cord) to negative fixture lead .(D)
3. Please refer to the below to complete all grounding instructions
electrical connections.
Outdoor Fixtures
1. Connect positive supply wire (A) (typically black or the smooth unmarked
side of the two-conductor cord) to positive fixture lead with appropriately (B)
sized twist on connector - see . Drawings 2 or 3
2. Connect negative supply wire (typically white or the ribbed, marked (C)
side of the two-conductor cord) to negative fixture lead .(D)
3. Cover open end of connectors with silicone sealant to form a watertight seal.
• If installing a wall mount fixture, use caulk to seal gaps between the fixture
mounting plate (backplate) and the wall. This will help prevent water from
entering the outlet box. If the wall surface is lap siding, use caulk and a
fixture mounting platform specially.
4. Please refer to the below to complete all grounding instructions
electrical connections.
gr r sounding inst uction
Flush Mount Fixtures
For positive grounding in a 3-wire electrical system, fasten the fixture ground
wire (typically copper or green plastic coated) to the fixture mounting strap (E) (1)
with the ground screw - see . (2) Drawing 1
Note: On straps for screw supported fixtures, first install the two mounting screws in strap.
Any remaining tapped hole may be used for the ground screw.
Chain Hung Fixtures
Loop fixture ground wire (typically copper or green plastic coated) under the (E)
head of the ground screw on fixture mounting strap and connect to the (2) (1)
loose end of the fixture ground wire directly to the ground wire of the building
system with appropriately sized twist-on connectors - see .Drawing 2
Post-Mount Fixtures
Connect fixture ground wire (typically copper or green plastic coated) to power (E)
supply ground with appropriately sized twist-on connector inside post. Cover open
end of connector with silicone sealant to form a watertight seal - see .Drawing 3
Drawing 1 - Flush Mount
Drawing 2 - Chain Hung
supply wire
fixture leads
twist-on
connectors
Drawing 3 - Post-Mount
twist-on
connectors
1
A CC
B D
supply wire
fixture leads
A C
B D
1
2
supply wire
fixture leads
A C
B D
twist-on
connectors
E
2
E
E
E
E
I.S. 18
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

Produktspecifikationer

Varumärke: Hinkley Lighting
Kategori: Lättnad
Modell: Hampton 3211AN-LED

Behöver du hjälp?

Om du behöver hjälp med Hinkley Lighting Hampton 3211AN-LED ställ en fråga nedan och andra användare kommer att svara dig


Lättnad Hinkley Lighting Manualer

Hinkley Lighting

Hinkley Lighting Delaney 46443BK Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Link 41808BK Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Hadley 3302AN-CL Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Hampton 3211AN-LED Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting 4081HB Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Hadley 3308AN Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Crew 4841HB Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Halo 42006BK Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Axel 4513BK Bruksanvisning

5 Januari 2025
Hinkley Lighting

Hinkley Lighting Axis 41706BK Bruksanvisning

5 Januari 2025

Lättnad Manualer

Nyaste Lättnad Manualer

Infinity

Infinity iM-2515 Bruksanvisning

6 Januari 2025
Infinity

Infinity iW-1240 RDM Bruksanvisning

6 Januari 2025
BeamZ

BeamZ Cobra 100 Spot Bruksanvisning

6 Januari 2025
Audibax

Audibax Austin 27 Bruksanvisning

6 Januari 2025
Audibax

Audibax Austin 54 Bruksanvisning

6 Januari 2025
Audibax

Audibax Dallas 210 Bruksanvisning

6 Januari 2025
Audibax

Audibax Dallas 216 Bruksanvisning

6 Januari 2025
Audibax

Audibax BAR 403 RGB PIXEL Bruksanvisning

6 Januari 2025
Audibax

Audibax Thunder 250 Bruksanvisning

6 Januari 2025
Audibax

Audibax BAR 124 RGB PIXEL Bruksanvisning

6 Januari 2025