Hitachi H 90SB Bruksanvisning
Läs nedan 📖 manual på svenska för Hitachi H 90SB (12 sidor) i kategorin Hamer. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
Demolition Hammer
Model H 90SB
Instruction manual
Note:
Before using this HITACHI Demolition Hammer, carefully read through this
INSTRUCTION MANUAL to ensure efficient, safe operation. It is
recommended that this INSTRUCTION MANUAL be kept readily available as
an important reference when using this power tool.
Double insulation
1
We sincerely thank you for selecting a HITACHI POWER TOOL. To operate this power tool
safely and efficiently, please read this INSTRUCTION MANUAL carefully to get a good
understanding of the precautions in operation, capacity of the power tool, use and the like.
IMPORTANT INFORMATION: SAFETY RULES FOR THE POWER TOOL
WARNING: When using the power tool, following basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and personal injury.
READ ALL INSTRUCTIONS
1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
2. CONSIDER WORK AREA ENVIRONMENT.
Don’t expose power tools to rain.
Don’t use power tools in damp or wet locations.
Keep work area well lit.
Don’t use the power tool in presence of flammable liquids or gases.
Power tools produce sparks during operation. They also spark when switching ON/
OFF. Never use power tools in dangerous sites containing lacquer, paint, benzine,
thinner, gasoline, gases, adhesive agents, and other materials which are combustible
or explosive.
3. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces.
For example: pipes, radiators, ranges refrigerator enclosures.
4. KEEP VISITORS OR CHILDREN AWAY. Do not let visitors or children contact the power
tool or extension cord. All visitors or children should be kept away from work area.
5. STORE IDLE POWER TOOLS. When not in use, power tools should be stored in dry,
and high or locked-up place-out of reach of children.
6. DON’T FORCE THE POWER TOOL. It will do the job better and safer at the rate for
which it was intended.
7. USE RIGHT POWER TOOLS. Don’t force a small power tool or attachment to do the job
of a heavy-duty tool. Don’t use the power tool for purpose not intended - for example -
don’t use circular saw for cutting tree limbs or logs.
8. DRESS PROPERLY. Do not wear loose clothes or accessories. They can be caught in
moving parts.
Rubber gloves and non-skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
9. USE SAFETY GLASSES. All persons in the area where power tools are being operated
should also wear safety eye protectors, and face or dust masks if cutting operation is
dusty.
10. DON’T ABUSE CORD. Never carry power tools by cord or yank the cord to disconnect
the power tool from receptacle. Keep the cord from heat, oil and sharp edges.
11. DON’T OVERREACH. Keep proper footing and balance at all times.
12. MAINTAIN POWER TOOLS WITH CARE. Keep power tools sharp and clean for better
and safer performance.
Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and if damaged, have repaired by the authorized service
center.
Inspect extension cords periodically and replace them if damaged.
Keep handles dry, clean, and free from oil and grease.
2
13. DISCONNECT POWER TOOLS. When not in use, before servicing, and when changing
accessories, such as blades, bits, cutters.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys
and adjusting wrenches are removed from the power tool before turning it on.
15. AVOID UNINTENTIONAL STARTING. Don’t carry a plugged-in the power tool with finger
on switch. Be sure switch is off when plugging in.
16. OUTDOOR USE EXTENSION CORDS. When the power tool is used outdoors, use only
extension cords intended for use outdoors and so marked.
17. STAY ALERT. Watch what you are doing. Use common sense. Do not operate the power
tool when you are tired.
18. CHECK DAMAGED PARTS. Before use of the power tool, a guard or other part should
be carefully checked to determine that it will operate properly and perform its intended
function. Check the alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may affect its operation. A guard or
other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by an authorized service center.
Do not use the power tool if switch does not turn it on and off.
19. AVOID USING A POWER TOOL FOR APPLICATIONS OTHER THAN THOSE SPECIFIED.
Never use the power tool for applications other than those specified in this instruction
manual.
20. ENSURE SAFE OPERATION THROUGH CORRECT HANDLING. Secure safe operation
through correct handling by observing the instructions described herein.
Do not employ accessories other than those specified herein; otherwise, a hazardous
condition may be created.
Never allow the power tool to be used by persons not familiar with correct handling
(such as chidren) or by those who are not familiar with the power tool.
21. CONFIRM THAT NO ITEMS SUCH AS AN ELECTRIC CABLE OR CONDUIT ARE BURIED
INSIDE. In places where electric wiring may be hidden behind a wall, floor, ceiling, etc.
do not hold or contact any metal parts of the poweer tool. In such cases, metal parts
could become electrically live and present a serious shock hazard.
22. KEEP THE RIGHT PARTS IN THE RIGHT POSITIONS. Do not remove covers and screws
which have been factory-mounted. They perform important respective roles. Keep them
in the original positions.
23. SHOULD THE PLASTIC HOUSING OR HANDLE OF THE POWER TOOL BE CRACKED OR
DEFORMED, DO NOT USE IT. Since cracked or deformed parts may lead to an operator
receiving an electric shock, do not use such a power tool. Immediately have it repaired.
24. SECURELY MOUNT ACCESSORIES AND BLADES TO THE POWER TOOL MAIN BODY.
Extra care must be taken when using the power tool on elevated location (such as a
roof ladder, scaffold, or the like) to prevent injury to someone underneath in the event
the power tool and/or accessory should drop.
25. ALWAYS KEEP THE MOTOR AIR VENT FULLY OPENED. A constantly open motor air
vent is necessary to allow air to come in and out for cooling the motor. Do not allow it
to become clogged up, even if dust is blown through it.
26. OPERATE THE POWER TOOL AT THE RATED VOLTAGE. Operate the power tool at
voltages specified on its nameplate.
27. NEVER TOUCH THE MOVING PARTS. Never touch the moving parts such as blades,
bits, cutters and others.
Produktspecifikationer
| Varumärke: | Hitachi |
| Kategori: | Hamer |
| Modell: | H 90SB |
Behöver du hjälp?
Om du behöver hjälp med Hitachi H 90SB ställ en fråga nedan och andra användare kommer att svara dig
Hamer Hitachi Manualer
28 Juli 2024
Hamer Manualer
- Hamer Bosch
- Hamer DeWalt
- Hamer Ferm
- Hamer Ozito
- Hamer Gude
- Hamer Makita
- Hamer Black And Decker
- Hamer Stanley
- Hamer Skil
- Hamer Ronix
- Hamer Hilti
- Hamer Taurus
- Hamer Metabo
- Hamer Milwaukee
- Hamer Hikoki
- Hamer Einhell
- Hamer Craftsman
- Hamer Power Craft
- Hamer Powerplus
- Hamer Porter-Cable
- Hamer Trotec
- Hamer Topcraft
- Hamer Powerfix
- Hamer Bavaria
- Hamer Fieldmann
- Hamer Cocraft
- Hamer Goon
- Hamer Anova
- Hamer Global
- Hamer King Craft
- Hamer Full Boar
- Hamer Alpha Tools
- Hamer Toolson
- Hamer Robust
- Hamer Einhell Bavaria
- Hamer Ergotools Pattfield
- Hamer MyTool
- Hamer McKenzie
- Hamer Proviel
- Hamer Bavaria By Einhell
- Hamer Prowork
- Hamer XU1
- Hamer Workzone Titanium
- Hamer CMI
Nyaste Hamer Manualer
17 Oktober 2024
6 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
30 September 2024
29 September 2024
28 September 2024
26 September 2024
26 September 2024