Hitachi VT-FX795A Bruksanvisning

Hitachi Videobandspelare VT-FX795A

Läs nedan 📖 manual på svenska för Hitachi VT-FX795A (20 sidor) i kategorin Videobandspelare. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/20

– 1 – EN

OWNER’S MANUAL

VIDEO CASSETTE

RECORDER

If you need additional

operating assistance after

reading this owner's manual

or to order replacement

accessories, please call

TOLL FREE : 1-800-448-2244.

VT-FX795A

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear of the cabinet.

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of suffi-

cient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of impor-

tant operating and maintenance (servicing) instruc-

tions in the literature accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

1. Read Instructions- All the safety and operating instructions should be read

before the appliance is operated.

2. Retain Instructions- The safety and operating instructions should be retained

for future reference.

3. Heed Warnings- All warnings on the appliance and in the operating instruc-

tions should be adhered to.

4. Follow Instructions- All operating and use instructions should be followed.

5. Cleaning- Unplug this video product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for

some specific reason, such as the possibility of the loss of an authorization

code for a CATV converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in item 5.

6. Attachments- Do not use attachments not recommended by the video prod-

uct manufacturer as they may cause hazards.

7.Water and Moisture- Do not use this video product near water, for example,

near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or

near a swimming pool, and the like.

8. Accessories- Do not place this video product on an unstable cart, stand, tri-

pod, bracket, or table.The video product may fall, causing serious injury to a

child or adult, and serious damage to the appliance. Use only with a cart,

stand, tripod, bracket, or table recommended by the manufacturer, or sold with

the video product. Any mounting of the appliance should follow

the manufacturer's instructions and should use a mounting

accessory recommended by the manufacturer.An appliance

and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance

and cart combination to overturn.

9.Ventilation- Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the video product

and to protect it from overheating, and these openings must not be blocked or

covered.The openings should never be blocked by placing the video product

on a bed, sofa, rug, or other similar surface.This video product should not be

placed in a built-in installation such as a bookcase or rack unless proper venti-

lation is provided or the manufacturer's instructions have been adhered to .

10. Power Sources-This video product should be operated only from the type of

power source indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your appliance dealer or local power com-

pany. For products intended to operate from battery power, or other sources,

refer to the operating instructions.

11. Grounding or Polarization- This video product is equipped with a polarized

alternating-current line plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way.This is a safety feature. If

you are unable to insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

12. Power Cord Protection- Power supply cords should be routed so that they

are not likely to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

13. Outdoor Antenna Grounding- If an outside antenna or cable system is con-

nected to the video product, be sure the antenna or cable system is grounded

so as to provide some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, pro-

vides information with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding electrode.(Fig.A)

14. Lightning- For added protection for this video product during a lightning storm,

or when it is left unattended and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable system.This will prevent

damage to the video product due to lightning and power-line surges.

15. Power Lines- An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits, or where it can

fall into such power lines or circuits.When installing an outside antenna sys-

tem, extreme care should be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

16. Overloading- Do not overload wall outlets and extension cords as this can

result in a risk of fire or electric shock.

17. Object and Liquid Entry- Never push objects of any kind into this video prod-

uct through any openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock. Never spill liquid of

any kind on the video product.

18. Servicing- Do not attempt to service this video product yourself as opening or

removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

19. Damage Requiring Service- Unplug this video product from the wall outlet

and refer servicing to qualified service personnel under the following condi-

tions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the video product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in damage

and will often require extensive work by a qualified technician to restore the

video product to its normal operation.

e. If the video product has been dropped or damaged in any way.

f. When the video product exhibits a distinct change in performance-this indi-

cates a need for service.

20. Replacement Parts- When replacement parts are required, be sure the ser-

vice technician has used replacement parts specified by the manufacturer or

have the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock or other hazards.

21. Safety Check- Upon completion of any service or repairs to this video prod-

uct, ask the service technician to perform safety checks to determine that the

video product is in proper operating condition.

22. Heat-This video product should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including amplifiers) that

produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMP

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE–

S2898A

– – 2 EN

1. POWER button

2. NUMBER buttons

3. MENU button

4. DISPLAY button

5. PLAY button

6. REW button

7. REC button

8. SEARCH MODE button

9. TAPE SPEED button

10. PAUSE button

11. STOP button

12. F.FWD button

13.

COUNTER RESET/EXIT button

14.

COUNTER MEMORY button

15. SLOW button

16. CH buttons

17. EJECT button

18. VCR / TV button

( )

19. AUDIO OUT jacks

20. AUDIO IN jacks

21. ANT. IN jack

22. ANT. OUT jack

23. VIDEO IN jack

24. VIDEO OUT jack

25. AC Power Cord

Display Window

23456789101112

POWER CHANNEL

TRACKING

L-AUDIO IN-RVIDEO IN

REC/IRT ST OP/ EJECT REW PLAY F.FWD

n m ab

PNV

Remote Control

SLOW

TAPE SPEED

SEARCH MODE

PAUSEREC

DISPLAY EXITMENU

COUNTER

RESET

MEMORY

POWER EJECT

REW

STOP

PLAY

F.FWD

789

VCR/TV

216

Rear Panel

ANT

AUDIO

VIDEO

OUT

OUT IN

OUT

19 20 21

24 23 22

Install Location

For safety and optimum performance of your VCR:

• Install the VCR in a horizontal and stable position. Do not place

anything directly on top of the VCR. Do not place the VCR directly

on top of the TV.

• Shield it from direct sunlight and keep it away from sources of

intense heat. Avoid dusty or humid places. Avoid places with insuffi-

cient ventilation for proper heat dissipation. Do not block the ventila-

tion holes on the sides of the VCR. Avoid locations subject to strong

vibration or strong magnetic fields.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from AC wall

outlet. Grasp it by the plug.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it is moved

from a cold place to a warm place, or after heating a cold room or

under conditions of high humidity. Do not use the VCR at least for 2

hours until its inside is dry.

FCC Warning

This equipment may generate or use radio frequency energy.

Changes or modifications to this equipment may cause harmful inter-

ference unless the modifications are expressly approved in the

instruction manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is made.

Important Copyright Information

Unauthorized recording or use of broadcast television programming,

video tape, film or other copyrighted material may violate applicable

duplication, use, or other acts which infringe upon the rights of copy-

right owners.

A Note about Recycling

This product's packaging materials are recyclable and can be reused.

Please dispose of any materials in accordance with your local recy-

cling regulations. Batteries should never be thrown away or incinerat-

ed but disposed of in accordance with your local regulations concern-

ing chemical wastes.

Note to the Cable TV System Installer

This reminder is provided to call the Cable TV system installer’s

attention to Article 820-40 of the National Electrical Code, which pro-

vides guidelines for proper grounding – in particular, specifying that

the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as possible.

NOTE:

This product may contain lead and mercury. Disposal of these materials

be regulated due to environmental considerations. For the disposal or

recycling information, Please contact your local authorities or the

Electronics industries Alliance : www.eiae.org.

Install two AA batteries

(supplied) matching the

polarity indicated on the

bottom of the remote

control.

1. Cassette Compartment

2. F.FWD button

3. PLAY button

4. REW button

5. STOP/EJECT button

6. REC/IRT button

7. Display Window

18. Remote Sensor

19.

CHANNEL/TRACKING

19.

buttons

10. POWER button

11. AUDIO Input jacks

12. VIDEO Input jack

(

)

13. PWR. (POWER) indicator

14. TAPE IN indicator

15. VCR indicator

16. REC indicator

17. TIMER indicator

18. CLOCK indicator

To insert the batteries

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

PRECAUTIONS

DESCRIPTION OF CONTROLS

Front Panel

VIDEO OUT JACK

Connect a video cable going to

the VIDEO IN jack of a cam-

corder, another VCR, a TV, or an

audio-visual system (laser disc

player, video disc player, etc.)

here.

AUDIO OUT JACKS

Connect the audio cables going

to the AUDIO IN jacks of a cam-

corder, another VCR, a stereo

amplifier, or an audio system

here.

VIDEO IN JACK

Connect a video cable coming

from the VIDEO OUT jack of a

camcorder, another VCR, or an

audio-visual source (laser disc

player, video disc player, etc.)

here.

AUDIO IN JACKS

Connect the audio cables com-

ing from the AUDIO OUT jacks

of a camcorder, another VCR, or

an audio source here.

– – 3 EN

Disconnect the AC power cord of the TV from the

AC outlet.

2Disconnect the antenna or cable from the TV.

3Connect the antenna or cable to the ANT. IN jack of

the VCR.

4Connect the VCR to the TV using the RF cable.

5Plug the AC power cords of the VCR and TV into

the AC outlets.

ANT

OUT

[VHF/UHF

combination antenna] [Back of the VCR]

IN OUT

[Cable box or satellite box]

[Indoor antenna] [Back of the

UHF/VHF combination TV]

UHF/VHF

RF cable

(supplied)

From Cable or

Satellite Company

If your TV does not have A/V terminals:

Press [PLAY] on the VCR for 3 seconds during playback.The

RF output channel will change to CH4 from CH3.

When you want to return to CH3 for RF output channel, press

[PLAY] on the VCR for 3 seconds during playback again.

(Default setting :CH3)

• There is case that the RF output channel does not change by

situation (For example, when you adjust tracking using [CHAN-

NEL ].

In this case, stop the playback, and start the playback again.

After that, press [PLAY] on the VCR for 3 seconds.

• If there is a power failure or the VCR is unplugged for more

than 30 seconds, the RF output channel setting will return to

CH3.

( )

You can automatically program the tuner to scan only the

channels you receive in your area.

•Channel memory programming is NOT needed when you

connect the VCR to a cable box or satellite box as in "Connect

VCR to TV Connection". In this case, select the VCR and TV

to channel 3 or 4 the same channel as the RF output channel

of the VCR. Then, the channel you want to record or view may

be selected at the cable box or satellite box.

•Follow the steps below once. Repeat it only if there is a

power failure or if the VCR is unplugged for more than 30

seconds. (In these cases, the programmed channels are

erased.)

•You must follow the steps below before attempting to play or

record a video tape. If you want to play or record a video tape

BEFORE programming the tuner, you can cancel it by press-

ing [COUNTER RESET/EXIT].

1You need to connect the antenna or cable to the

VCR first. Then, connect the VCR power plug into a

standard AC outlet.

Turn on the TV and set the TV to channel 3. If chan-

nel 3 is already occupied for broadcasting, change the

RF output to CH 4, and change the TV channel to CH4.

(See “RF Output Channel” on page 3 for the detail.)

3Turn on the VCR by pressing [POWER]. When the

POWER is on, both the POWER and VCR indicators

on the VCR will be on.

4Select the On Screen Language

("ENGLISH" , "FRANCAIS" or

"ESPAÑOL") by pressing [PLAY] or

[STOP]. Then, press [F.FWD].

5Begin channel preset by pressing [F.FWD] once. The

tuner scans and memorizes all active

channels in your area.

•

The VCR distinguishes between standard

TV channels and cable channels.

6After scanning, the tuner stops on the lowest mem-

orized channel. The TV screen returns to TV mode.

• If "AUTO SET UP" appears on the TV screen again, check

the cable connections. Press [F.FWD] once again and the

VCR will begin preset again.

Using Optional AUDIO/ VIDEO Output Jacks

With this connection, you can get better pictures and sounds

when playing back a tape if your TV has A/V Input jacks.

Please refer to your TV’s owner’s manual.

Using AUDIO/VIDEO Input Jacks

You can use the A/V input jacks on the front or the back of

the VCR.

• To use the input jacks on the back of the VCR, select "L1"

position by pressing [0], [0], [1] on the remote control or

[CHANNEL ].

• To use the input jacks on the front of the VCR, select "L2"

position by pressing [0], [0], [2] on the remote control or

[CHANNEL ].

• “ ” “ ” L1 or L2 is found before the lowest memorized channel.

(Example: CH2)

( )

AUDIO

L R

VIDEO

OUT IN

AUDIO

[Playing VCR]

[TV A/V]

Audio/Video cables

(not supplied)

VCR to TV Connection

RF Output Channel

VCR to AV TV connection using AUDIO/VIDEO Cables

SETUP

Automatic Channel Set Up

PREPARATION FOR USE

You can select the desired channel by using [CHANNEL

] or directly pressing [Number] on the remote control.

Note for using the Number buttons:

• When selecting cable channels which are higher than 99,

enter channel numbers as a three-digit number.(For exam-

ple: 117, press 1,1,7)

• You must precede single-digit channel numbers with a zero

(For example: 02, 03, 04 and so on).

1Press [MENU] until the main menu appears.

2Select "CHANNEL SET UP" by pressing [PLAY] or

[STOP]. Then, press [F.FWD].

3Select "AUTO SET UP" by pressing [PLAY] or

[STOP]. Then, press [F.FWD]. After scanning, the

tuner stops on the lowest memorized channel.

To Preset the Channel Again

( )

To Select a Desired Channel

ENGLISH

LANGUAGE SELECT

FRANCAIS

AUTO SET UP

CH 01

Produktspecifikationer

Varumärke:	Hitachi
Kategori:	Videobandspelare
Modell:	VT-FX795A
Färg på produkten:	Grey, Metallic
Vikt:	15000 g
Bredd:	440 mm
Djup:	730 mm
Höjd:	500 mm
Höjd (min):	500 mm
Höjd (max):	620 mm
Monteringsmetod:	ISOFIX
Maximal viktkapacitet:	18 kg
Sväng:	Ja
Rekommenderat kön:	Jongen/meisje
Färgning:	Monochromatisch
Justerbart ryggstöd:	Ja
Bilbarnstolsgrupp:	0 + / 1 (0 - 18 kg; 0 - 4 jaar)
Nackstöd:	Ja
Justerbart nackstöd:	Ja
Vridbar fot:	Ja