Hobart 4822 Bruksanvisning
Läs nedan 📖 manual på svenska för Hobart 4822 (12 sidor) i kategorin Köttkvarn. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobar tcorp.com F-35109 Rev. A (April 2014)
MODEL 4822 CHOPPER
ML-136125
ML-136126
– 2 –
© HOBART, 2014
Installation, Operation and Care of
MODEL 4822 CHOPPER
SAVE THESE INSTRUCTIONS
GENERAL
The 4822 Chopper uses a 11/2 horsepower motor. It will grind 16 lbs. per minute, fi rst cutting, through a
1/ " plate.8
The 4822 Chopper, with funnel-shaped cylinder, will grind 20 to 22 lbs. per minute, fi rst cutting, through
a 1/ " plate.8
Fig. 1
– 3 –
INSTALLATION
UNPACKING
Remove the carton from around the machine. Remove the four bolts holding the machine to the skid.
Unpack the chopper cylinder assembly.
Immediately after unpacking the chopper, check for possible shipping damage. If this machine is found to
be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to make sure that it agrees with the specifi cations on the
machine data plate.
The four leg assemblies (Fig. 1) are removed and packed in a separate carton for shipment. Unpack and
assemble these legs by screwing them into the four tapped holes of the frame. The rubber feet on these
legs cushion the machine. Under normal operation, the machine need not be bolted down.
ELECTRICAL CONNECTIONS
The electrical cord on this machine is equipped with a grounding- type plug which
must be connected to a properly grounded receptacle. If the receptacle is not the proper grounding
type, contact an electrician. Do not remove the grounding prong from the plug.
Choppers with three phase motors should be connected so that the hub drive runs counterclockwise
facing the cylinder assembly.
A check must be made to verify correct direction of rotation. Energize machine momentarily by turning
switch ON then OFF.
If rotation is incorrect, disconnect plug from electrical outlet, disassemble the plug and interchange any
two power leads (not the green ground lead). Then reassemble the plug and recheck.
Produktspecifikationer
| Varumärke: | Hobart |
| Kategori: | Köttkvarn |
| Modell: | 4822 |
Behöver du hjälp?
Om du behöver hjälp med Hobart 4822 ställ en fråga nedan och andra användare kommer att svara dig
Köttkvarn Hobart Manualer
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
Köttkvarn Manualer
- Köttkvarn Bosch
- Köttkvarn Braun
- Köttkvarn Panasonic
- Köttkvarn Kenwood
- Köttkvarn Tefal
- Köttkvarn Ade
- Köttkvarn Adler
- Köttkvarn Ariete
- Köttkvarn Gorenje
- Köttkvarn Silvercrest
- Köttkvarn Saturn
- Köttkvarn Moulinex
- Köttkvarn Sinbo
- Köttkvarn Jata
- Köttkvarn Melissa
- Köttkvarn Scarlett
- Köttkvarn Sencor
- Köttkvarn Cuisinart
- Köttkvarn United Office
- Köttkvarn Profilo
- Köttkvarn Vitek
- Köttkvarn Eldom
- Köttkvarn Zelmer
- Köttkvarn Ardes
- Köttkvarn ETA
- Köttkvarn Gastroback
- Köttkvarn MPM
- Köttkvarn RGV
- Köttkvarn Nesco
- Köttkvarn Eurochef
- Köttkvarn Duronic
- Köttkvarn Avantco
- Köttkvarn Pro-Cut
- Köttkvarn Reber
- Köttkvarn Royal Catering
- Köttkvarn Browin
- Köttkvarn Weston
Nyaste Köttkvarn Manualer
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024
14 Oktober 2024