Honeywell 32003796-001 Bruksanvisning

Läs nedan 📖 manual på svenska för Honeywell 32003796-001 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
® U.S. Registered Trademark Patents Pending
Copyright © 2004 Honeywell International Inc. • • All Rights Reserved
INSTALLATION INSTRUCTIONS
69-1721EFS
32003796-001
Cover Plate
APPLICATION
The 32003796-001Cover Plate is used to cover marks
left on the wall by the old thermostat. It can be used with
the VisionPRO™ TH8000 Series Thermostats.
Installation
When Installing this Product...
1. Read these instructions carefully.
2. Installer must be a trained, experienced service
technician.
CAUTION
Electrical Hazard.
Can cause electrical shock or equipment
damage.
Disconnect power supply before starting
installation.
Mounting
The Cover Plate can be mounted on the wall when
mounting with a TH8000 Series Thermostat. See Fig. 1
for dimensions.
1. Use Cover Plate to mark and drill holes; install
anchors, if necessary.
2. Pull wire through Cover Plate and thermostat
wallplate wiring opening.
3. Align Cover Plate and thermostat wallplate with the
holes. Insert the screws included with the
thermostat; then level and tighten the screws. See
Fig. 2.
Fig. 1. 32003796-001 Cover Plate dimensions.
7-7/8 (200)
3-5/16 (84)
3-5/16
(84)
M22139
5-1/2
(140)
32003796-001 COVER PLATE
69-1721EFS 2
Fig. 2. Attaching TH8000 Series Thermostat, Subbase and 32003796 Cover Plate to the wall.
M22138
WIRES THROUGH
WALL OPENING
32003796 COVER PLATE
OPTIONAL MOUNTING HOLE LOCATION
OPTIONAL
MOUNTING
HOLE LOCATION
TH8000 SUBBASE
MOUNTING
SCREWS (4)
TH8000 SERIES
THERMOSTAT
WALL
ANCHORS
(4)
REMOVE DURING
INSTALLATION
® Marque de commerce déposée aux É.-U. Brevets en instance
Copyright © 2004 Honeywell International Inc. • Tous droits réservés
NOTICE D'INSTALLATION
69-1721EFS
Plaque de recouvrement
32003796-001
APPLICATION
La plaque de recouvrement 32003796-001 sert à
camoufler les marques laissées sur le mur par l’ancien
thermostat. Elle peut être utilisée avec les thermostats
VisionPROMC TH8000.
Installation
Avant d’installer ce produit...
1. Lire attentivement les instructions.
2. L’installateur doit être un technicien d’expérience
ayant reçu la formation pertinente.
CAUTION
Risque de choc électrique.
Peut provoquer des chocs électriques ou
endommager le matériel.
Couper l’alimentation électrique avant
d’effectuer le raccordement.
Montage
La plaque de recouvrement peut être installée sur le mur
lors de l’installation d’un thermostat TH8000. Voir la Fig.
1 pour connaître l’encombrement.
1. Utiliser la plaque de recouvrement pour marquer
les ouvertures, puis percer les ouvertures; poser
des chevilles d’ancrage au besoin.
2. Faire passer les fils à travers la plaque de recou-
vrement et par l’ouverture de la plaque murale du
thermostat prévue à cet effet.
3. Faire correspondre les ouvertures de la plaque de
recouvrement avec celle de la plaque de montage
du thermostat. Insérer les vis comprises avec le
thermostat; mettre de niveau et resserrer les vis.
Voir la Fig. 2.
Fig. 1. Encombrement de la plaque de recouvrement
32003796-001.
7-7/8 (200)
3-5/16 (84)
3-5/16
(84)
M22139
5-1/2
(140)

Produktspecifikationer

Varumärke: Honeywell
Kategori: Inte kategoriserad
Modell: 32003796-001

Behöver du hjälp?

Om du behöver hjälp med Honeywell 32003796-001 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Honeywell Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer