Hooker 1654-90268-DKW1 Bruksanvisning
Läs nedan 📖 manual på svenska för Hooker 1654-90268-DKW1 (3 sidor) i kategorin Säng. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/3
1/3
ASSEMBLY INSTRUCTION
ITEM#1654-90267-DKW1 6/0-6/6 Panel Headboard
1654-90268-DKW1 6/0-6/6 Panel Footboard
1654-90263-DKW1 6/0 Rails
1654-90253-DKW1 5/0-6/6 Rails
Caution: Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more persons.
A
C
GEF
H
NO. HARDWARE LIST
E
F
G
H
K
R
Q
V
U
M
8
1
8
8
20
1
10
10
10
1
Q'TY
NUT
SPANNER WRENCH
CURVERD WASHER
FULL THREADED BOLT
SCREW
4mm ALLEN WRENCH
5mm ALLEN WRENCH
BOLT
LOCK WASHER
FLAT WASHER
Diagram 1
2/3
Assembly steps:
1. Insert 2 bolts (H) into hol and Footboard (B). Attach end of side es of each posts on Headboard (A)
rails (C) to the bolts (H) on posts using 2 curved washers (G) and 2 nuts (E). Tighten nuts (E)
securely with spanner wrench (F). (See diagram 1)
Note: Please make sure the end of side rail with rail must be placed on top when assembling 6/0
upholstered rails.
D
L
R
Q
V
U
Diagram 2
2. Take out center supports (L) from rail box. Attach center supports (L) to slats using 2 bolts (Q), 2 lock
washers (V) and 2 flat washers (U). Secure the bolts (Q) by using allen wrench (R). (See diagram 2)
D
k
C
Diagram 3
3. Attach slats (D) to side rails (C), align pre-drilled holes on the slat to holes on the cleat of side rail
(C), using screws (K) to tighten both. (See diagram 3)
3/3
Note: You can change the height of slat by adjusting the height of cleat on side rail as shown in diagram
4. Remove the bolt (Q), lock washer (V) and flat washer (U) from cleat by turning the bolt (Q) with
Allen wrench (M) in anti-clockwise direction, adjust the cleat to a desired position, and then secure
the lock washer, flat washer, bolt in a clockwise direction by turning with Allen wrench.
Diagram 4
You can adjust the height of center supports (L) as shown in Diagram 5 to meet your need by following
steps.
1. Unscrew bolts on center supports (L) with Allen wrench (R).
2. Adjust the height of center supports, align the holes on 2pcs of woods and tighten them together with
2 bolts(Q), 2 lock washers (V) and 2 flat washers by turning with Allen wrench(R) in a clockwise （ ）U
direction.
D
L
V
R
Q
U
Diagram 5
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp cloth.
Polish the finish with soft cloth and an industry recognized furniture polish.
Produktspecifikationer
| Varumärke: | Hooker |
| Kategori: | Säng |
| Modell: | 1654-90268-DKW1 |
Behöver du hjälp?
Om du behöver hjälp med Hooker 1654-90268-DKW1 ställ en fråga nedan och andra användare kommer att svara dig
Säng Hooker Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Säng Manualer
- Säng IKEA
- Säng Jysk
- Säng Parisot
- Säng Talgø
- Säng Intex
- Säng Paidi
- Säng Livarno
- Säng Tvilum
- Säng Wehkamp
- Säng Carlson
- Säng MADE
- Säng Habitat
- Säng Flexa
- Säng Delta
- Säng Lionelo
- Säng Leen Bakker
- Säng Vermeiren
- Säng Uppababy
- Säng Tchibo
- Säng Burmeier
- Säng Koala
- Säng Bell'O
- Säng Gami
- Säng Boori
- Säng Kogan
- Säng Dorel
- Säng X Rocker
- Säng Stompa
- Säng Meubelco
- Säng Loof
- Säng Fantastic
- Säng Ovela
- Säng Shangri-La
Nyaste Säng Manualer
27 Oktober 2024
24 Oktober 2024
18 Oktober 2024
16 Oktober 2024
7 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024