Hughes & Kettner Spirit Nano Series Bruksanvisning
Hughes & Kettner
Gitarrförstärkare
Spirit Nano Series
Läs nedan 📖 manual på svenska för Hughes & Kettner Spirit Nano Series (32 sidor) i kategorin Gitarrförstärkare. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/32
S P I R I T ™ A O S E R I E S
I N PU TG A I NT O N ES AG GI N GM A S T E RP O N E S
• English • Deutsch • Français • Italiano • Español • 日本語 • 中文
中文
中文
中文中文
Manual 1.2
S P I R I T
A O E R I E
™
Important Safety
Instructions! Read before
connecting!
This product has been built by the manufacturer
in accordance with IEC 62368-1 and left the
factory in safe working order. To maintain this
condition and ensure non-risk operation, the user
must follow the advice and warning comments
found in the operating instructions. The unit
conforms to Protection Class 1 (protectively
earthed). If this product shall be used in vehicles,
ships or aircraft or at altitudes exceeding 2000 m
above sea level, take care of the relevant safety
regulations which may exceed the IEC 62368-1
requirements.
WARNING: To prevent the risk of fire and shock
hazard, do not expose this appliance to moisture
or rain. Do not open case – no user serviceable
parts inside. Refer service to qualified service
personnel.
This symbol, wherever it appears, alerts
you to the presence of uninsulated dangerous
voltage inside the enclosure – voltage that may
be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts
you to the presence of externally accessible
hazardous voltage. External wiring connected to
any terminal marked with this symbol must be a
„ready made cable” complying with the
manufacturers recommendations, or must be a
wiring installed by instructed persons only.
This symbol, wherever it appears, alerts
you to important operating and maintenance
instructions in the accompanying literature. Read
the manual.
This symbol, wherever it appears, tells
you: Take care! Hot surface! To prevent burns you
must not touch.
All electrical and electronic products
including batteries should be disposed of
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
Read these instructions. Keep these
instructions. Follow all warnings and instructions
marked on the product and in this manual.
• Do not use this product near water. Do not
place the product near water, baths, wash
basins, kitchen sinks, wet areas, swimming
pools or damp rooms.
• Do not place objects containing liquid on the
product – vases, glasses, bottles etc.
• Clean only with dry cloth.
• Do not remove any covers or sections of the
housing.
• The set operating voltage of the product must
match the local mains supply voltage. If you are
not sure of the type of power available consult
your dealer or local power company.
• To reduce the risk of electrical shock, the
grounding of this product must be maintained.
Use only the power supply cord provided with
this product, and maintain the function of the
center (grounding) pin of the mains connection
at any time. Do not defeat the safety purpose
of the polarized or grounding-type plug.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the device! Power supply cords should always
be handled carefully. Periodically check cords
for cuts or sign of stress, especially at the plug
and the point where the cord exits the device.
• Never use a damaged power cord.
• Unplug this product during lightning storms or
when unused for long periods of time.
• This product can be fully disconnected from
mains only by pulling the mains plug at the unit
or the wall socket. The product must be placed
in such a way at any time, that disconnecting
from mains is easily possible.
• Fuses: Replace with IEC127 (5x20mm) type and
rated fuse only! It is prohibited to use „patched
fuses” or to short the fuse-holder. Replacing
any kind of fuses must only be carried out by
qualified service personal.
• Refer all servicing to qualified service
personnel. Servicing is required when the unit
has been damaged in any way, such as:
- When the power cord or plug is damaged or
frayed.
- If liquid has been spilled or objects have fallen
into the product.
- If the product has been exposed to rain or
moisture.
- If the product does not operate normally when
the operating instructions are followed.
- If the product has been dropped or the cabinet
has been damaged.
• Do not connect external speakers to this
product with an impedance lower than the
rated impedance given on the product or in
this manual. Use only cables with sufficient
cross section according to the local safety
regulations.
• Keep away from direct sunlight.
• Do not install near heat sources such as
radiators, heat registers, stoves or other devices
that produce heat.
• This apparatus is for moderate climates areas
use, not suitable for use in tropical climates
countries.
• Do not block any ventilation openings. Install
in accordance with manufacturer’s instructions.
This product must not be placed in a built-
in installation such as a rack unless proper
ventilation is provided.
• Always allow a cold device to warm up to
ambient temperature, when being moved into
a room. Condensation can form inside it and
damage the product, when being used without
warming up.
• Do not place naked flame sources, such as
lighted candles on the product.
• The device must be positioned at least 20
cm/8“ away from walls with free air space
inbetween, and there must be free air space
of at least 50 cm / 20“ immediately above the
unit within which no object(s) may be placed
or positioned.
• Make sure that the device is always placed on a
solid, flat surface.
• Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer or sold with
the product. When a cart is used, use caution
when moving the cart/product combination to
avoid injury from tip-over.
• Use only accessories recommended by the
manufacturer, this applies for all kind of
accessories, for example protective covers,
transport bags, stands, wall or ceiling
mounting equipment. In case of attaching
any kind of accessories to the product, always
follow the instructions for use, provided by
the manufacturer. Never use fixing points
on the product other than specified by the
manufacturer.
• This appliance is NOT suitable to be used by
any person or persons (including children) with
limited physical, sensorial or mental ability, or
by persons with insufficient experience and/
or knowledge to operate such an appliance.
Children under 4 years of age must be kept
away from this appliance at all times.
• Never push objects of any kind into this product
through cabinet slots as they may touch
dangerous voltage points or short out parts
that could result in risk of fire or electric shock.
• This product is capable of delivering sound
pressure levels in excess of 90 dB, which may
cause permanent hearing damage! Exposure
to extremely high noise levels may cause
a permanent hearing loss. Wear hearing
protection if continuously exposed to such
high levels.
• The manufacturer only guarantees the safety,
reliability and efficiency of this product if:
3
- Assembly, extension, re-adjustment, modifications or repairs are carried
out by the manufacturer or by persons authorized to do so.
- The electrical installation of the relevant area complies with the
requirements of IEC (ANSI) specifications.
- The unit is used in accordance with the operating instructions.
- The grounding of the center pin of the mains plug is maintained to reduce
the risk of shock.
Things to do before operating the amp
• Please read these instructions carefully, particularly the notes on safety,
before operating the amp.
• The manufacturer disclaims any liability on responsibility whatsoever for
any damage or defect to this and other devices resulting from misuse.
• Before you plug this amp into a mains power outlet, make sure its Power
switche is off and that the voltage rating indicated on its rear panel
matches your local mains current.
• A word of warning before you fire up your Spirit Nano: It’s loud, and
high volume levels can cause hearing damage. To avoid very loud and
unwelcome surprises, make a habit of backing the Volume knob of the
guitar connected to the Spirit Nano all the way down before switching on
the amp!
Version 2.5 07/2018
1 Control Features
1.1 Front Panel
All models offer the same set of features:
●
1 Input: Connect your guitar to this input using a
shielded cord equipped with 6.3 mm (1/4") jack plugs.
●
2 Gain: The Gain knob determines input sensitivity
and therefore the preamp‘s saturation level. Along
with the Tone and Sagging controls, it is your most
important sound-sculpting tool.
●
3 Tone: This powerful one-knob sound-shaping
tool is fine-tuned for each model, and it specifically
addresses the frequency ranges that define each
model‘s characteristic tone.
●
4 Sagging: Along with the Gain and Tone controls,
Sagging is your key knob for making new and exciting
sounds! This knob gives you full control over the power
amp‘s saturation level and behavior at any volume. It
lets you delicately control the creaminess of your tone
and lets you dial through decades of guitar sounds with
a twist of the wrist.
Note: the more sag, and the more saturation in the
power amp. Depending on the Gain setting, Sagging
will also influence the level of the power amp. From
the far left (at minimum Sagging level) to the center
position, the volume will increase; from the center to
the far right position (maximum Sagging!), the volume
may drop. Please use the Master control to adjust the
overall volume.
I NP UTGA INT O NES A GG IN GMA S T E RP ONE S
123456
• English • Deutsch • Français • Italiano • Español • 日本語 •
中文
中文
中文
中文中文
Produktspecifikationer
| Varumärke: | Hughes & Kettner |
| Kategori: | Gitarrförstärkare |
| Modell: | Spirit Nano Series |
Behöver du hjälp?
Om du behöver hjälp med Hughes & Kettner Spirit Nano Series ställ en fråga nedan och andra användare kommer att svara dig
Gitarrförstärkare Hughes & Kettner Manualer
20 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
Gitarrförstärkare Manualer
- Gitarrförstärkare Ampeg
- Gitarrförstärkare Vox
- Gitarrförstärkare Roland
- Gitarrförstärkare ART
- Gitarrförstärkare Valeton
- Gitarrförstärkare Peavey
- Gitarrförstärkare Boss
- Gitarrförstärkare Marshall
- Gitarrförstärkare Radial Engineering
- Gitarrförstärkare Blackstar
- Gitarrförstärkare Electro Harmonix
- Gitarrförstärkare Fender
- Gitarrförstärkare SPL
- Gitarrförstärkare Harley Benton
- Gitarrförstärkare Laney
- Gitarrförstärkare Ashdown Engineering
- Gitarrförstärkare Palmer
- Gitarrförstärkare Markbass
- Gitarrförstärkare Fishman
- Gitarrförstärkare EBS
- Gitarrförstärkare Suhr
- Gitarrförstärkare Two Notes
- Gitarrförstärkare GR Bass
- Gitarrförstärkare Voodoo Lab
- Gitarrförstärkare Bugera
- Gitarrförstärkare AMT
- Gitarrförstärkare DV Mark
- Gitarrförstärkare Budda
- Gitarrförstärkare DACS Audio
Nyaste Gitarrförstärkare Manualer
21 Oktober 2024
21 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
25 September 2024
25 September 2024
24 September 2024